DIN German - Metallurgy Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN 24500-3 | EN-Rolling mill equipment; rolling mills for steel designation for mill types | |
| DIN DIN 24500-4 | EN-Rolling mill equipment; rolling mills for steel designation for mill stands and drives | |
| DIN DIN 24500-5 | EN-Rolling mill equipment; rolling mills for steel designation for cooling and lubricating plants for the rolling | |
| DIN DIN 24500-6 | EN-Rolling mill equipment; rolling mills for steel designations for cooling equipment for rolled material | |
| DIN DIN 24500-7 | EN-Rolling mill equipment; rolling mills for steel designations for equipment for straightening and stretching | |
| DIN DIN 24500-8 | EN-Rolling mill equipment; rolling mills for steel designation of equipment for piling up | |
| DIN DIN 24500-9 | EN-Rolling mill equipment; rolling mills for steel designation of equipment for piling off | |
| DIN DIN 3068 | EN-Steel wire ropes; round strand rope 6 × 24 Standard + 7 fibre cores | |
| DIN DIN 3089-2 | EN-Steel wire ropes; splices; long splice | |
| DIN DIN 30910-1 | EN-Sintered metal materials; Werkstoff-Leistungsblaetter (WLB) sint-material specifications; part 1: explanatory notes for WLB | |
| DIN DIN 30910-2 | EN-Sintered metal materials; Werkstoff-Leistungsblaetter (WLB) sint-material specifications; part 2: materials for filters | |
| DIN DIN 30910-3 | EN-Sintered metal materials - Sintered-material specifications - Part 3: Materials for bearings and structural parts with bearing properties | |
| DIN DIN 30910-4 | EN-Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural parts | |
| DIN DIN 30910-6 | EN-Sintered metal materials; Werkstoff-Leistungsblaetter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts | |
| DIN DIN 30911-0 | EN-Sintered metal materials; sint-testing procedures; part 0: explanatory notes for SPN | |
| DIN DIN 30911-6 | EN-Sintered metal materials; sint-testing procedures; part 6: determination of filter properties | |
| DIN DIN 30911-7 | EN-Sintered metal materials; sint-testing procedures; part 7: determination of softmagnetic properties | |
| DIN DIN 30912-1 | EN-Sintered metal materials; sint-guide-lines; part 1: machining of sintered parts | |
| DIN DIN 30912-2 | EN-Sintered metal materials; sint-guide-lines; part 2: designing of sintered parts | |
| DIN DIN 30912-3 | EN-Sintered metal materials; sint-guide-lines; part 3: heat-treatment of sintered parts | |
| DIN DIN 30912-4 | EN-Sintered metal materials; sint-guide-lines; part 4: surface-treatment of sintered parts | |
| DIN DIN 30912-5 | EN-Sintered metal materials; sint-guide-lines; part 5: joining of sintered parts | |
| DIN DIN 30912-6 | EN-Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels | |
| DIN DIN 30950 | EN-Fusion hardening - General description of method | |
| DIN DIN 30960 | EN-Fusion hardening with additional materials - Specification for fusion hardening (SHA) - Form sheet | |
| DIN DIN 30965 | EN-Laser engineering - Laser beam hardenability test | |
| DIN DIN 30999 | EN-Hardmetals - Rockwell test (scales A and 45N) - Calibration of reference blocks out of hardmetals to be used for the verification and calibration of hardness testing machines | |
| DIN DIN 4000-23 | EN-Tabular layouts of article characteristics for iron and steel | |
| DIN DIN 4000-32 | EN-Tabular layouts of article characteristics for material; non-ferrous metals | |
| DIN DIN 40501-2 | EN-Aluminium for use in electrical engineering - Part 2: Tubes rods bars and sections Technical delivery conditions | |
| DIN DIN 46406-1 | EN-Binding Wires for Electrical Machines; Magnetic Steel Wire Drawn and Tinned | |
| DIN DIN 46406-2 | EN-Binding Wires for Electrical Machines; Non-magnetic Steel Wire Drawn and Tinned | |
| DIN DIN 46420 | EN-Round Aluminium Wires for Electrical Purposes Drawn; Dimensions | |
| DIN DIN 46424 | EN-Switchgear; Extruded Channel Sections of Aluminium for Busbars | |
| DIN DIN 46425 | EN-Round Aluminium Wires for Electrical Purposes Exactly Drawn; Dimensions | |
| DIN DIN 46431 | EN-Round Copper Wires for Electrical Purposes; Precision Drawn Dimensions | |
| DIN DIN 46452 | EN-Rectangular bare wires for winding wires; dimensions | |
| DIN DIN 488-1 | EN-Reinforcing steels - Part 1: Grades properties marking | |
| DIN DIN 488-2 | EN-Reinforcing steels - Reinforcing steel bars | |
| DIN DIN 488-3 | EN-Reinforcing steels - Reinforcing steel in coils steel wire | |
| DIN DIN 488-4 | EN-Reinforcing steels - Welded fabric | |
| DIN DIN 488-5 | EN-Reinforcing steels - Lattice girders | |
| DIN DIN 488-6 | EN-Reinforcing steel - Part 6: Assessment of conformity | |
| DIN DIN 488-7 | EN-Reinforcing steel; verification of weldability of reinforcing steel bars; test procedure and evaluation | |
| DIN DIN 50018 | EN-Testing in a saturated atmosphere in the presence of sulfur dioxide | |
| DIN DIN 50103-3 | EN-Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales Bm and Fm for thin steel sheet | |
| DIN DIN 50106 | EN-Testing of Metallic Materials; Compression Test | |
| DIN DIN 50113 | EN-Testing of metals; Rotating bar bending fatigue test | |
| DIN DIN 50115 | EN-Notched bar impact testing of metallic materials using test pieces other than ISO test pieces | |
| DIN DIN 50116 | EN-Testing of zinc and zinc alloys; impact test | |
| DIN DIN 50125 | EN-Testing of metallic materials - Tensile test pieces | |
| DIN DIN 50131 | EN-Testing of Metallic Materials; Determination of Shrinkage | |
| DIN DIN 50134 | EN-Testing of metallic materials - Compression test of metallic cellular materials | |
| DIN DIN 50142 | EN-Testing of metallic materials; Flat bending fatigue test | |
| DIN DIN 50148 | EN-Tensile test pieces for non-ferrous metals pressure die castings | |
| DIN DIN 50154 | EN-Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0179 mm | |
| DIN DIN 50156-1 | EN-Metallic materials - Leeb hardness test - Part 1: Test method | |
| DIN DIN 50156-2 | EN-Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices | |
| DIN DIN 50156-3 | EN-Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks | |
| DIN DIN 50157-1 | EN-Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method | |
| DIN DIN 50157-2 | EN-Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices | |
| DIN DIN 50158-1 | EN-Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method | |
| DIN DIN 50158-2 | EN-Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices | |
| DIN DIN 50159-1 | EN-Metallic materials - Hardness testing with the UCI method - Part 1: Test method | |
| DIN DIN 50159-2 | EN-Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices | |
| DIN DIN 50162 | EN-Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test | |
| DIN DIN 50190-3 | EN-Hardness depth of heat-treated parts; determination of the effective depth of hardening after nitriding | |
| DIN DIN 50190-4 | EN-Hardness depth of heat-treated parts - Part 4: Determination of the fusion hardening depth and the fusion depth | |
| DIN DIN 50502 | EN-Chemical analysis of copper and copper alloys - Determination of copper in unalloyed copper containing not less than 9990 % of copper | |
| DIN DIN 50503 | EN-Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys | |
| DIN DIN 50504 | EN-Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 04 % of iron at maximum | |
| DIN DIN 50506 | EN-Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 25 % of nickel at maximum | |
| DIN DIN 50507 | EN-Chemical analysis of copper and copper alloys; determination of lead extracting-titration method | |
| DIN DIN 50508 | EN-Chemical analysis of copper and copper alloys; determination of tin as alloying element volumetric method | |
| DIN DIN 50510 | EN-Chemical analysis of copper and copper alloys; determination of arsenic in copper and copper alloys photometric method | |
| DIN DIN 50550 | EN-Zinc and zinc alloys; determination of indium and thallium by atomic absorption spectrometry | |
| DIN DIN 50600 | EN-Testing of metallic materials; Metallographic Micrographs; Picture scales and formats | |
| DIN DIN 50900-2 | EN-Corrosion of metals - Terms - Part 2: Electrochemical terms | |
| DIN DIN 50905-1 | EN-Corrosion of metals - Corrosion testing - Part 1: General guidance |