Print Page Email Page Smaller Text Larger Text

DIN English - Mechanical Systems and Components for General Use Collection

This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.

Most Popular Standards from the DIN English - Mechanical Systems and Components for General Use Collection

DIN DIN 6063-1 EN-Screw threads used mainly for plastic containers - Part 1: Dimensions of buttress threads 
DIN DIN EN 13906-2 EN-Cylindrical helical springs made from round wire and bars - Calculation and design - Part 2: Extension springs 
DIN DIN 513-1 EN-Metric buttress threads; thread profiles 
DIN DIN EN ISO 10664 EN-Hexalobular internal driving feature for bolts and screws (ISO 10664:2005) 
DIN DIN EN 12532 EN-Castors and wheels - Castors and wheels for applications up to 11 m/s (4 km/h) 
DIN DIN 3965-1 EN-Tolerancing of bevel gears; basic concepts 
DIN DIN 3760 EN-Rotary shaft lip seals 
DIN DIN 8196-1 EN-Toothing of chain wheels for roller chains as specified in DIN 8187 and DIN 8188; profile dimensions 
DIN DIN 4024-1 EN-Machine foundations; flexible structures that support machines with rotating elements 
DIN DIN 4024-2 EN-Machine foundations; rigid foundations for machinery with periodic excitation 
DIN DIN 620-2 EN-Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings 
DIN DIN ISO 1940-1 EN-Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003) 
DIN DIN 76-1 EN-Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13-1 
DIN DIN 2098-1 EN-Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards 
DIN DIN 13-1 EN-General purpose ISO metric screw threads - Nominal sizes for 1 mm to 68 mm diameter coarse pitch threads 
DIN DIN 103-7 EN-ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter 
DIN DIN 2096-2 EN-Cylindrical Coil Compression Springs Made from Round Rods; Quality Requirements for Mass Production 
DIN DIN 625-1 EN-Rolling bearings; single row radial contact ball bearings 
DIN DIN 76-2 EN-Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1 
DIN DIN 2211-1 EN-Power transmission elements; grooved pulleys for narrow V-belts; dimensions materials 
DIN DIN ISO 8992 EN-Fasteners - General requirements for bolts screws studs and nuts (ISO 8992:2005) 
DIN DIN EN ISO 7040 EN-Prevailing torque type hexagon nuts (with non-metallic insert) style 1 - Property classes 5 8 and 10 (ISO 7040:1997) 
DIN DIN 2217-1 EN-Driving Elements; V-belt Pulleys; Dimensions Material 
DIN DIN EN ISO 7089 EN-Plain washers - Normal series - Product grade A (ISO 7089:2000); English version of DIN EN ISO 7089 
DIN DIN 3962-1 EN-Tolerances for Cylindrical Gear Teeth; Tolerances for Diviations of Individual Parameters 
DIN DIN 475-1 EN-Widths across flats for bolts screws valves and fittings 
DIN DIN 867 EN-Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering 
DIN DIN 6885-1 EN-Drive Type Fastenings without Taper Action; Parallel Keys Keyways Deep Pattern 
DIN DIN 3972 EN-Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867 
DIN DIN 3771-5 EN-O-rings for use in fluid power systems - Design details and dimensions of housings 
DIN DIN EN ISO 228-1 EN-Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions tolerances and designation (ISO 228-1:2000) 
DIN DIN EN 10226-1 EN-Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions tolerances and designation 
DIN DIN 3570 EN-Steel Strap for Tubes of NW 20 to 500 
DIN DIN 7989-1 EN-Washers for use in structural steelwork - Part 1: Product grade C 
DIN DIN 8140-1 EN-Wire thread inserts for ISO metric - Dimensions and technical delivery conditions 
DIN DIN ISO 5294 EN-Synchronous belt drives - Pulleys (ISO 5294:1989) 
DIN DIN EN ISO 10511 EN-Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997) 
DIN DIN 380-1 EN-Stub metric trapezoidal screw threads; thread profiles 
DIN DIN 103-9 EN-ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features 
DIN DIN 868 EN-General Definitions and Specification Factors for Gears Gear Pairs and Gear Trains 
DIN DIN 3965-2 EN-Tolerancing of bevel gears; tolerances for individual parameters 
DIN DIN EN ISO 4042 EN-Fasteners - Electroplated coatings (ISO 4042:1999); English version of DIN EN ISO 4042 
DIN DIN 3962-3 EN-Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations 
DIN DIN 3967 EN-System of Gear Fits; Backlash Tooth Thickness Allowances Tooth Thickness Tolerances; Principles 
DIN DIN EN 20898-2 EN-Mechanical properties of fasteners; nuts with coarse pitch thread and specified proof load values (ISO 898-2:1992) 
DIN DIN 1850-3 EN-Plain bearings - Sintered bushes 
DIN DIN 15403 EN-Lifting Hooks for Hoists; Knuckle Threads 
DIN DIN 267-2 EN-Fasteners; technical delivery conditions; design and dimensional accuracy 
DIN DIN 7513 EN-Hexagon head and slotted head thread cutting screws - Dimensions requirements and testing 
DIN DIN 3771-1 EN-O-rings for use in fluid systemsh - Dimensions to ISO 3601-1