DIN - Standards English (Active) Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 13923 | EN-Filament-wound FRP pressure vessels - Materials design manufacturing and testing | |
| DIN DIN EN 13924 | EN-Bitumen and bituminous binders - Specifications for hard paving grade bitumens | |
| DIN DIN EN 13925-1 | EN-Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 1: General principles | |
| DIN DIN EN 13925-2 | EN-Non-destructive testing - X-ray diffraction from polycristalline and amorphous material - Part 2: Procedures | |
| DIN DIN EN 13925-3 | EN-Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments | |
| DIN DIN EN 13926 | EN-Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value; N-methyl imidazole method | |
| DIN DIN EN 13927 | EN-Non-destructive testing - Visual testing - Equipment | |
| DIN DIN EN 1393 | EN-Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties | |
| DIN DIN EN 13938-1 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements | |
| DIN DIN EN 13938-2 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy | |
| DIN DIN EN 13938-3 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition | |
| DIN DIN EN 13938-4 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions | |
| DIN DIN EN 13938-5 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures | |
| DIN DIN EN 13938-6 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings | |
| DIN DIN EN 13938-7 | EN-Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder | |
| DIN DIN EN 1394 | EN-Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength | |
| DIN DIN EN 13940-1 | EN-Health informatics - System of concepts to support continuity of care - Part 1: Basic concepts; English version EN 13940-1:2007 | |
| DIN DIN EN 13942 | EN-Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified + Cor 1:2009); English version EN 13942:2009 + AC:2009 | |
| DIN DIN EN 13946 | EN-Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers | |
| DIN DIN EN 13947 | EN-Thermal performance of curtain walling - Calculation of thermal transmittance | |
| DIN DIN EN 13948 | EN-Flexible sheets for waterproofing - Bitumen plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration | |
| DIN DIN EN 13949 | EN-Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements testing marking | |
| DIN DIN EN 1395-1 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements | |
| DIN DIN EN 1395-2 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF | |
| DIN DIN EN 1395-3 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying | |
| DIN DIN EN 1395-4 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying | |
| DIN DIN EN 1395-5 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers | |
| DIN DIN EN 1395-6 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems | |
| DIN DIN EN 1395-7 | EN-Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems | |
| DIN DIN EN 13950 | EN-Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions requirements and test methods | |
| DIN DIN EN 13951 | EN-Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use (includes Amendment A1:2008) | |
| DIN DIN EN 13952 | EN-LPG equipment and accessories - Filling procedures for LPG cylinders | |
| DIN DIN EN 13953 | EN-LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (includes Amendment A1:2007) | |
| DIN DIN EN 13954 | EN-Food processing machinery - Bread slicers - Safety and hygiene requirements | |
| DIN DIN EN 13955 | EN-Surface active agents - Determination of Krafft-point and solubility of ionic surface active agents | |
| DIN DIN EN 13956 | EN-Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics (includes Corrigendum AC:2006) | |
| DIN DIN EN 13957 | EN-Aluminium and aluminium alloys - Extruded round coiled tube for general applications - Specification | |
| DIN DIN EN 13958 | EN-Aluminium and aluminium alloys - Cold drawn round coiled tube for general applications - Specification | |
| DIN DIN EN 13959 | EN-Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E type A B C and D | |
| DIN DIN EN 1396 | EN-Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications | |
| DIN DIN EN 13963 | EN-Jointing materials for gypsum plasterboards - Definitions requirements and test methods | |
| DIN DIN EN 13963 Berichtigung 1 | EN-Jointing materials for gypsum plasterboards - Definitions requirements and test methods Corrigendum 1 to English version of DIN EN 13963:2005-08 | |
| DIN DIN EN 13964 | EN-Suspended ceilings - Requirements and test methods (includes Amendment A1:2006) | |
| DIN DIN EN 13965-1 | EN-Characterization of waste - Terminology - Part 1: Material related terms and definitions; Trilingual version EN 13965-1:2004 | |
| DIN DIN EN 13965-2 | EN-Characterization of waste - Terminology - Part 2: Management related terms and definitions; Trilingual version EN 13965-2:2004 | |
| DIN DIN EN 13965-2 | EN-(DRAFT) Characterization of waste - Terminology - Part 2: Management related terms and definitions; Trilingual version FprEN 13965-2:2010 | |
| DIN DIN EN 13966-1 | EN-Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels | |
| DIN DIN EN 13967 | EN-Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics (includes Amendment A1:2006) | |
| DIN DIN EN 13969 | EN-Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics (includes Amendment A1:2006) | |
| DIN DIN EN 1397 | EN-Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance | |
| DIN DIN EN 13970 | EN-Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics | |
| DIN DIN EN 13970/A1 | EN-Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics | |
| DIN DIN EN 13971 | EN-Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid | |
| DIN DIN EN 13972 | EN-Rigid plastics containers - Definition of nominal brimful and total capacity and measurement of brimful and total capacity | |
| DIN DIN EN 13973 | EN-Rigid plastics containers - Method for determination of drainability | |
| DIN DIN EN 13974 | EN-Rigid plastics containers - Specification of tolerance for dimensions weight and volume | |
| DIN DIN EN 13975 | EN-Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects; German version EN 13975:2003 German and English texts | |
| DIN DIN EN 13976-1 | EN-Rescue systems - Transportation of incubators - Part 1: Interface conditions | |
| DIN DIN EN 13976-2 | EN-Rescue systems - Transportation of incubators - Part 2: System requirements | |
| DIN DIN EN 13977 | EN-Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance (includes Amendment A1:2007) | |
| DIN DIN EN 13978-1 | EN-Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions | |
| DIN DIN EN 13979-1 | EN-Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels (includes Amendment A1:2009) | |
| DIN DIN EN 1398 | EN-Dock levellers - Safety requirements | |
| DIN DIN EN 13980 | EN-Potentially explosive atmospheres - Application of quality systems | |
| DIN DIN EN 13981-1 | EN-Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products | |
| DIN DIN EN 13981-2 | EN-Aluminium and aluminium alloys - Products for structural railway applications Technical conditions for inspection and delivery - Part 2: Plates and sheets | |
| DIN DIN EN 13981-3 | EN-Aluminium and aluminium alloys - Products for structural railway applications Technical conditions for inspection and delivery - Part 3: Castings | |
| DIN DIN EN 13981-4 | EN-Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings | |
| DIN DIN EN 13984 | EN-Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics | |
| DIN DIN EN 13984/A1 | EN-Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics | |
| DIN DIN EN 13985 | EN-Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) | |
| DIN DIN EN 13986 | EN-Wood-based panels for use in construction - Characteristics evaluation of conformity and marking | |
| DIN DIN EN 1399 | EN-Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes | |
| DIN DIN EN 13990 | EN-Wood flooring - Solid softwood floor boards | |
| DIN DIN EN 13996 | EN-Surface active agents - Foaming power and antifoaming power - Turbine stirring method | |
| DIN DIN EN 13997 | EN-Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing | |
| DIN DIN EN 13999-1 | EN-Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure | |
| DIN DIN EN 13999-2 | EN-Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds | |
| DIN DIN EN 13999-3 | EN-Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes (includes Amendment A1:2009) |