DIN English - Fluid Systems and Components Collection
This collection contains documents from the following standards organization(s):
Deutsches Institut Fur Normung E.V.
Most Popular Standards from the DIN English - Fluid Systems and Components Collection
| DIN DIN 24163-3 | EN-Fans; performance testing of small fans using standardized test airways | |
| DIN DIN 3852-2 | EN-Stud ends and tapped holes with pipe thread for use with compression couplings valves and screw plugs; Dimensions | |
| DIN DIN 8074 | EN-Polyethylene (PE) pipes - Dimensions | |
| DIN DIN EN 10217-1 | EN-Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| DIN DIN 3202-5 | EN-Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings | |
| DIN DIN 3865 | EN-Compression fittings and couplings - 24- cone compression ends with O-ring for ports as in DIN EN ISO 8434-1 | |
| DIN DIN EN 1514-1 | EN-Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts | |
| DIN DIN 4119-1 | EN-Above-ground Cylindrical Flat-bottomed Tank Installations of Metallic Materials; Fundamentals Design Tests | |
| DIN DIN 4119-2 | EN-Above-ground cylindrical flat-bottom tank structures of metallic materials; Calculation | |
| DIN DIN EN ISO 1127 | EN-Stainless steel tubes - Dimensions tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996 | |
| DIN DIN 16965-1 | EN-Wound glass fibre reinforced polyester resin (UP-GF); pipes Type A pipes dimensions | |
| DIN DIN 16963-11 | EN-Pipe fittings and joint assemblies for pressure pipes made from types PE 80 and PE 100 polyethylene - Dimensions of bushings flanges and sealing elements for socket welding | |
| DIN DIN EN 1092-2 | EN-Circular flanges for pipes valves fittings and accessories PN designated - Part 2: Cast iron flanges | |
| DIN DIN 475-1 | EN-Widths across flats for bolts screws valves and fittings | |
| DIN DIN EN 10220 | EN-Seamless and welded steel tubes - Dimensions and masses per unit length | |
| DIN DIN 2429-2 | EN-Symbolic representation of pipework components on engineering drawings; functional representation | |
| DIN DIN 3230-5 | EN-Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing | |
| DIN DIN EN 12266-1 | EN-Industrial valves - Testing of valves - Part 1: Pressure tests test procedures and acceptance criteria - Mandatory requirements | |
| DIN DIN 30672 | EN-Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 -C | |
| DIN DIN 8063-2 | EN-Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions | |
| DIN DIN 28403 | EN-Vacuum technology; quick release couplings; clamped type couplings | |
| DIN DIN EN 14420-7 | EN-Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007) | |
| DIN DIN ISO 3320 | EN-Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987) | |
| DIN DIN EN ISO 6708 | EN-Pipework components - Definition and selection of DN (nominal size) | |
| DIN DIN 2442 | EN-Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100 | |
| DIN DIN EN 736-1 | EN-Valves - Terminology - Types of valves | |
| DIN DIN 16868-1 | EN-Wound and filled glass fibre reinforced polyester resin pipes - Dimensions | |
| DIN DIN 45635-56 | EN-Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators fan-assisted air heaters and fan units of air handling devices | |
| DIN DIN EN 12285-2 | EN-Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids | |
| DIN DIN EN 13789 | EN-Industrial valves - Cast iron globe valves | |
| DIN DIN 74324-1 | EN-Polyamide tubing for air braking systems - Requirements and testing | |
| DIN DIN 477-5 | EN-Gas cylinder valves - Part 5: Outlets for valves rated for pressure up to 450 bar | |
| DIN DIN EN 10241 | EN-Steel threaded pipe fittings; English version of DIN EN 10241 | |
| DIN DIN 19560-10 | EN-Polypropylene (PP) pipes and fittings for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour quality control and installation | |
| DIN DIN EN 10217-7 | EN-Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | |
| DIN DIN EN 1451-1 | EN-Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes fittings and the systems | |
| DIN DIN 16892 | EN-Crosslinked high-density polyethylene (PE-X) pipes - General quality requirements and testing | |
| DIN DIN 8075 | EN-Polyethylene (PE) pipes - General quality requirements and testing | |
| DIN DIN 30677-2 | EN-External corrosion protection of buried valves; heavy-duty thermoset plastics coatings | |
| DIN DIN 2470-1 | EN-Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings | |
| DIN DIN EN 10216-1 | EN-Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | |
| DIN DIN 3852-11 | EN-Stud ends and tapped holes for use with compression couplings valves and screw plugs - Type E stud end dimensions | |
| DIN DIN EN 545 | EN-Ductile iron pipes fittings accessories and their joints for water pipelines - Requirements and test methods | |
| DIN DIN EN 10216-3 | EN-Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | |
| DIN DIN 24346 | EN-Hydraulic fluid power; hydraulic systems; general rules for application | |
| DIN DIN 28090-2 | EN-Static seals for flanged connections - Part 2: In-process testing of sheet gasket materials | |
| DIN DIN 16893 | EN-Crosslinked high-density polyethylene (PE-X) pipes - Dimensions | |
| DIN DIN EN 1643 | EN-Valve proving systems for automatic shut-off valves for gas burners and gas appliances; English version of DIN EN 1643 | |
| DIN DIN 24166 | EN-Fans; technical delivery conditions | |
| DIN DIN 3356-1 | EN-Globe valves; General data |
View Alphabetical Listing of Documents
- Documents: DIN DIN 1615 to DIN DIN 24163-1
- Documents: DIN DIN 24163-3 to DIN DIN 3942
- Documents: DIN DIN 3944 to DIN DIN 8077
- Documents: DIN DIN 8079 to DIN DIN EN 1074-1
- Documents: DIN DIN EN 1074-3 to DIN DIN EN 12449
- Documents: DIN DIN EN 12451 to DIN DIN EN 13081
- Documents: DIN DIN EN 13083 to DIN DIN EN 13480-8
- Documents: DIN DIN EN 13483 to DIN DIN EN 14420-3
- Documents: DIN DIN EN 14420-5 to DIN DIN EN 1515-3
- Documents: DIN DIN EN 15189 to DIN DIN EN 253
- Documents: DIN DIN EN 26704 to DIN DIN EN 802
- Documents: DIN DIN EN 804 to DIN DIN EN ISO 13846
- Documents: DIN DIN EN ISO 13968 to DIN DIN EN ISO 4672