DIN English - Electronics Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V. 1 2 3 > >
| DIN DIN 43460 | EN-Contact assignment for circuit breakers rated for voltages lower than 52 kV - Assignment of auxiliary and control circuits to contact pins in plug connectors | |
| DIN DIN EN 140401-802/AA | EN-(DRAFT) Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2; German version EN 140401-802:2007/FprAA:2010 | |
| DIN DIN EN 140401-803/AA | EN-(DRAFT) Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0 5; 01; 025; 05; 1; 2; German version EN 140401-803:2007/FprAA:2010 | |
| DIN DIN EN 190000 | EN-Generic specification: Monolithic integrated circuits; German version EN 190000:1995 | |
| DIN DIN EN 60194 | EN-Printed board design manufacture and assembly - Terms and definitions (IEC 60194:2006); German version EN 60194:2006 text in English | |
| DIN DIN EN 60297-3-106 | EN-(DRAFT) Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 4826 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets | |
| DIN DIN EN 60603-7-4 | EN-(DRAFT) Connectors for electronic equipment - Part 7-4: Detail specification for 8-way unshielded free and fixed connectors for data transmissions with frequencies up to 250 MHz (IEC 48B/2008/CDV:2009); German ver | |
| DIN DIN EN 60603-7-7 | EN-(DRAFT) Connectors for electronic equipment - Part 7-7: Detail specification for 8-way shielded free and fixed connectors for data transmission with frequencies up to 600 MHz (IEC 48B/2010/CDV:2009); German version | |
| DIN DIN EN 60617-5 | EN-Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes (IEC 60617-5:1996); German version EN 60617-5:1996 | |
| DIN DIN EN 60679-6 | EN-(DRAFT) Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guide (IEC 49/811/CDV:2008); German version | |
| DIN DIN EN 60749-15 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices (IEC 47/2014/CDV:2009); German version FprEN 60749-15:2009 | |
| DIN DIN EN 60749-19/A1 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength (IEC 47/2016/CDV:2009); German version EN 60749-19:2003/FprA1:2009 | |
| DIN DIN EN 60749-21 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability (IEC 47/2025/CDV:2009); German version FprEN 60749-21:2009 | |
| DIN DIN EN 60749-23/A1 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life (IEC 47/2017/CDV:2009); German version EN 60749-23:2004/FprA1:2009 | |
| DIN DIN EN 60749-29 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test (IEC 47/2026/CDV:2009); German version FprEN 60749-29:2009 | |
| DIN DIN EN 60749-30/A1 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing (IEC 47/2019/CDV:2009); German version EN 60749-30:20 | |
| DIN DIN EN 60749-32/A1 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) (IEC 47/2018/CDV:2009); German version EN 60749-32:2003/FprA1:2009 | |
| DIN DIN EN 60749-34 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling (IEC 47/2027/CDV:2009); German version FprEN 60749-34:2009 | |
| DIN DIN EN 60749-7 | EN-(DRAFT) Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 47/2021/CDV:2009); German version FprEN 60749-7:2009 | |
| DIN DIN EN 61249-2-31 | EN-(DRAFT) Materials for printed boards and other interconnecting structures - Part 2-31: Reinforced base materials clad and unclad for high frequency application - Halogenated modified or unmodified resin system woven | |
| DIN DIN EN 61249-2-32 | EN-(DRAFT) Materials for printed boards and other interconnecting structures - Part 2-32: Reinforced base materials clad and unclad for high frequency application - Halogenated modified or unmodified resin system woven | |
| DIN DIN EN 61249-2-33 | EN-(DRAFT) Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials clad and unclad for high frequency application - Non-halogenated modified or unmodified resin system w | |
| DIN DIN EN 61249-2-34 | EN-(DRAFT) Materials for printed boards and other interconnecting structures - Part 2-34: Reinforced base materials clad and unclad for high frequency application - Non-halogenated modified or unmodified resin system w | |
| DIN DIN EN 61360-1 | EN-(DRAFT) Standard data element types with associated classification scheme for electric components - Part 1: Definitions - Principles and methods (IEC 3D/157/CDV:2007); German version prEN 61360-1:2007 | |
| DIN DIN EN 61360-2 | EN-(DRAFT) Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema (IEC 3D/159/CDV:2007); English version prEN 61360-2:2007 | |
| DIN DIN EN 61360-2 | EN-Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema (IEC 61360-2:2002 + A1:2003); German version EN 61360-2:2002 + A1:2004 text English | |
| DIN DIN EN 61360-4 | EN-Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005); German version EN | |
| DIN DIN EN 61360-5 | EN-Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema (IEC 61360-5:2004); German version EN 61360-5:2004 text English | |
| DIN DIN EN 61523-1 | EN-Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems (IEC 61523-1:2001); German version EN 61523-1:2002 text in English | |
| DIN DIN EN 61523-2 | EN-Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries (IEC 61523-2:2002); German version EN 61523-2:2002 text in English | |
| DIN DIN EN 61747-5-3 | EN-(DRAFT) Liquid crystal display devices - Part 5-3: Glass strength and reliability measurement method (IEC 110/117/CDV:2007); German version prEN 61747-5-3:2007 | |
| DIN DIN EN 62014-1 | EN-Electronic design automation libraries - Part 1: Input/output buffer information specifications (IBIS version 3.2) (IEC 62014-1:2001); German version EN 62014-1:2002 | |
| DIN DIN EN 62258-2 | EN-Semiconductor die products - Part 2: Exchange data formats (IEC 62258-2:2005); German version EN 62258-2:2005 text in English | |
| DIN DIN EN 62258-2 | EN-(DRAFT) Semiconductor die products - Part 2: Exchange data formats (IEC 47/2023/CDV:2009); English version FprEN 62258-2:2009 | |
| DIN DIN EN ISO 11145 | EN-Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) | |
| DIN DIN EN ISO 11146-1 | EN-Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005) | |
| DIN DIN EN ISO 11146-2 | EN-Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005) | |
| DIN DIN EN ISO 11151-1 | EN-Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV visible and near-infrared spectral range (ISO 11151-1:2000); English version of DIN EN ISO 11151-1 | |
| DIN DIN EN ISO 11151-2 | EN-Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); English version of DIN EN ISO 11151-2 | |
| DIN DIN EN ISO 11252 | EN-Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004) | |
| DIN DIN EN ISO 11254-1 | EN-Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test (ISO 11254-1:2000); English version of DIN EN ISO 11254-1 | |
| DIN DIN EN ISO 11254-2 | EN-Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001) | |
| DIN DIN EN ISO 11254-3 | EN-Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities (ISO 11254-3:2006) | |
| DIN DIN EN ISO 11551 | EN-Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003) | |
| DIN DIN EN ISO 11553-1 | EN-Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) | |
| DIN DIN EN ISO 11553-2 | EN-Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) | |
| DIN DIN EN ISO 11554 | EN-Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power energy and temporal characteristics (ISO 11554:2006) | |
| DIN DIN EN ISO 11670 | EN-Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003) | |
| DIN DIN EN ISO 11670 Berichtigung 1 | EN-Corrigenda to DIN EN ISO 11670:2003-10 | |
| DIN DIN EN ISO 11807-1 | EN-Integrated optics - Vocabulary - Part 1: Basic terms and symbols (ISO 11807-1:2001) | |
| DIN DIN EN ISO 11807-2 | EN-Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO 11807-2:2001) | |
| DIN DIN EN ISO 11810-1 | EN-Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005) | |
| DIN DIN EN ISO 11810-2 | EN-Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007) | |
| DIN DIN EN ISO 11990 | EN-Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003) | |
| DIN DIN EN ISO 12005 | EN-Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003) | |
| DIN DIN EN ISO 13694 | EN-Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000); English version of DIN EN ISO 13694 | |
| DIN DIN EN ISO 13694 Berichtigung 1 | EN-Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000) Corrigendum 1 to English version of DIN EN ISO 13694:2000-11 | |
| DIN DIN EN ISO 13695 | EN-Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004) | |
| DIN DIN EN ISO 13697 | EN-Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006) | |
| DIN DIN EN ISO 14880-1 | EN-Microlens array - Part 1: Vocabulary (ISO 14880-1:2001 + Corr. 1:2003) | |
| DIN DIN EN ISO 14880-2 | EN-Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006) | |
| DIN DIN EN ISO 14880-3 | EN-Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) | |
| DIN DIN EN ISO 14880-4 | EN-Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) | |
| DIN DIN EN ISO 14881 | EN-Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2001) | |
| DIN DIN EN ISO 15367-1 | EN-Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367-1:2003) | |
| DIN DIN EN ISO 15367-2 | EN-Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors (ISO 15367-2:2005) | |
| DIN DIN EN ISO 15902 | EN-Optics and photonics - Diffractive optics - Vocabulary (ISO 15902:2004) | |
| DIN DIN EN ISO 17526 | EN-Optic and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) | |
| DIN DIN EN ISO 22827-1 | EN-Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005) | |
| DIN DIN EN ISO 22827-2 | EN-Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005) | |
| DIN DIN EN ISO 24013 | EN-Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2006) | |
| DIN DIN IEC 60050-561 | EN-(DRAFT) International Electrotechnical Vocabulary - Chapter 561: Piezoelectric and dielectric devices for frequency control and selection (IEC 49/851/CD:2009) | |
| DIN DIN IEC 60115-2 | EN-(DRAFT) Fixed resistors for use in electronic equipment - Part 2: Sectional specification - Fixed low-power non-wirewound resistors (IEC 40/2013/CD:2009) | |
| DIN DIN IEC 60115-8 | EN-(DRAFT) Fixed resistors for use in electronic equipment - Part 8: Sectional specification: Fixed surface mount (SMD) resistors (IEC 40/1457/CD:2004) | |
| DIN DIN IEC 60115-8-1 | EN-(DRAFT) Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification - Fixed surface mount resistors categorized as level G (IEC 40/2019/CD:2009) | |
| DIN DIN IEC 60122-3 | EN-(DRAFT) Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections (IEC 49/848/CD:2009) | |
| DIN DIN IEC 60130-9 | EN-(DRAFT) Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (IEC 48B/2003/CD:2009) | |
| DIN DIN IEC 60191-4 | EN-(DRAFT) Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages (IEC 47D/769/CD:2010) | |
| DIN DIN IEC 60191-6-1 | EN-(DRAFT) Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead termina |
1 2 3 > >