DIN German - Electronics Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 60384-9-1 | EN-Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification - Fixed capacitors of ceramic dielectric Class 2 - Assessment level EZ (IEC 60384-9-1:2005); German version EN 60384-9-1:2005 | |
| DIN DIN EN 60393-1 | EN-Potentiometers for use in electronic equipment - Part 1: Generic specification (IEC 60393-1:2008); German version EN 60393-1:2009 | |
| DIN DIN EN 60444-1 | EN-Measurement of quartz crystal unit parameters by zero phase technique in a ?-network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase t | |
| DIN DIN EN 60444-2 | EN-Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version E | |
| DIN DIN EN 60444-3 | EN-Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in | |
| DIN DIN EN 60444-4 | EN-Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f<sub>L</sub> load resonance resistance R<sub>L</sub> and th | |
| DIN DIN EN 60444-5 | EN-Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German ve | |
| DIN DIN EN 60444-6 | EN-Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:1995); German version EN 60444-6:1997 | |
| DIN DIN EN 60444-7 | EN-Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004); German version EN 60444-7:2004 | |
| DIN DIN EN 60444-8 | EN-Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003 | |
| DIN DIN EN 60444-9 | EN-Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units (IEC 60444-9:2007); German version EN 60444-9:2007 | |
| DIN DIN EN 60512-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 1: General (IEC 60512-1:2001); German version EN 60512-1:2001 | |
| DIN DIN EN 60512-1-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination; Test 1a: Visual examination (IEC 60512-1-1:2002); German version EN 60512-1-1:2002 | |
| DIN DIN EN 60512-1-100 | EN-Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications (IEC 60512-1-100:2006); German version EN 60512-1-100:2006 | |
| DIN DIN EN 60512-1-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination; Test 1b: Examination of dimension and mass (IEC 60512-1-2:2002); German version EN 60512-1-2:2002 | |
| DIN DIN EN 60512-1-3 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination; Section 3: Test 1c: Electrical engagement length (IEC 60512-1-3:1997); German vers | |
| DIN DIN EN 60512-1-4 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General; Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); Germa | |
| DIN DIN EN 60512-10-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components) static load tests and overload tests - endurance tests and overload tests - Test 10d: Electrical overload (con | |
| DIN DIN EN 60512-11-1 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 1: Test 11a: Climatic sequence (IEC 60512-11-1:1995); German version EN 60512- | |
| DIN DIN EN 60512-11-10 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests; Test 11j: Cold (IEC 60512-11-10:2002); German version EN 60512-11-10:2002 | |
| DIN DIN EN 60512-11-11 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests; Test 11k: Low air pressure (IEC 60512-11-11:2002); German version EN 60512-11-11:2002 | |
| DIN DIN EN 60512-11-12 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests; Test 11m: Damp heat cyclic (IEC 60512-11-12:2002); German version EN 60512-11-12:2002 | |
| DIN DIN EN 60512-11-13 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness solderless wrapped connections (IEC 60512-11-13:2002); German version EN 60512-11-13:2002 | |
| DIN DIN EN 60512-11-14 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003 | |
| DIN DIN EN 60512-11-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests; Test 11b: Combined/sequential cold low air pressure and damp heat (IEC 60512-11-2:2002); German version EN 60512-11-2:2002 | |
| DIN DIN EN 60512-11-3 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests; Test 11c: Damp heat steady state (IEC 60512-11-3:2002); German version EN 60512-11-3:2002 | |
| DIN DIN EN 60512-11-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests; Test 11d: Rapid change of temperature (IEC 60512-11-4:2002); German version EN 60512-11-4:2002 | |
| DIN DIN EN 60512-11-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests; Test 11e: Mould growth (IEC 60512-11-5:2002); German version EN 60512-11-5:2002 | |
| DIN DIN EN 60512-11-6 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests; Test 11f: Corrosion salt mist (IEC 60512-11-6:2002); German version EN 60512-11-6:2002 | |
| DIN DIN EN 60512-11-8 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests; Section 8: Test 11h: Sand and dust (IEC 60512-11-8:1995); German version EN 60512-11-8 | |
| DIN DIN EN 60512-11-9 | EN-Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests; Test 11i: Dry heat (IEC 60512-11-9:2002); German version EN 60512-11-9:2002 | |
| DIN DIN EN 60512-12-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability wetting solder bath method (IEC 60512-12-1:2006); German version EN 60512-12-1:2006 | |
| DIN DIN EN 60512-12-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability wetting soldering iron method (IEC 60512-12-2:2006); German version EN 60512-12-2:2006 | |
| DIN DIN EN 60512-12-2 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability wetting soldering iron method (IEC 60512-12-2:2006); German version EN 60512-12-2:2006 Corrigendu | |
| DIN DIN EN 60512-12-3 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006 | |
| DIN DIN EN 60512-12-3 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006 Corrigendum to DIN EN 60512-12 | |
| DIN DIN EN 60512-12-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006 | |
| DIN DIN EN 60512-12-4 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006 Corrige | |
| DIN DIN EN 60512-12-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006 | |
| DIN DIN EN 60512-12-5 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006 Corr | |
| DIN DIN EN 60512-12-6 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering | |
| DIN DIN EN 60512-12-7 | EN-Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests; Test 12g: Solderability wetting balance method (IEC 60512-12-7:2001); German version EN 60512-12-7:2001 | |
| DIN DIN EN 60512-13-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006 | |
| DIN DIN EN 60512-13-1 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006); German version EN 60512-13-1:2006 Corrigendum to | |
| DIN DIN EN 60512-13-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006 | |
| DIN DIN EN 60512-13-2 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces (IEC 60512-13-2:2006); German version EN 60512-13-2:2006 Corrigendum t | |
| DIN DIN EN 60512-13-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006 | |
| DIN DIN EN 60512-13-5 Berichtigung 1 | EN-Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13-5:2006); German version EN 60512-13-5:2006 Corrigendum to D | |
| DIN DIN EN 60512-14-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 | |
| DIN DIN EN 60512-14-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006 | |
| DIN DIN EN 60512-14-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006 | |
| DIN DIN EN 60512-14-6 | EN-Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006 | |
| DIN DIN EN 60512-14-7 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14- | |
| DIN DIN EN 60512-15-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (IEC 60512-15-1:2008); German version EN 60512-15-1:2008 | |
| DIN DIN EN 60512-15-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (IEC 60512-15-2:2008); German version EN 60512-15-2:2008 | |
| DIN DIN EN 60512-15-3 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008 | |
| DIN DIN EN 60512-15-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion release and extraction force (IEC 60512-15-4:2008); German version EN 60512-15-4:2 | |
| DIN DIN EN 60512-15-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert cable nutation (IEC 60512-15-5:2008); German version EN 60512-15-5:2008 | |
| DIN DIN EN 60512-15-6 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008); German version EN 60512-15-6:2008 | |
| DIN DIN EN 60512-15-7 | EN-Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (IEC 60512-15-7:2008); German version EN 60512-15-7:2008 | |
| DIN DIN EN 60512-15-8 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations; section 8: Test 15h: Contact retention system resistanc | |
| DIN DIN EN 60512-16-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008 | |
| DIN DIN EN 60512-16-11 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force solderless wrapped connections (IEC 60512-16-11:2008); German vers | |
| DIN DIN EN 60512-16-13 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping solderless wrapped connections (IEC 60512-16-13:2008); German version | |
| DIN DIN EN 60512-16-14 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-1 | |
| DIN DIN EN 60512-16-16 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength fixed male tabs (IEC 60512-16-16:2008); German version EN 60512 | |
| DIN DIN EN 60512-16-17 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength fixed male tabs (IEC 60512-16-17:2008); German ve | |
| DIN DIN EN 60512-16-18 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts simulation (IEC 60512-16-18:2008); German version EN 60512- | |
| DIN DIN EN 60512-16-2 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (IEC 60512-16-2:2008); German version EN 60512-16-2:2008 | |
| DIN DIN EN 60512-16-20 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations; section 20: Test 16t: Mechanical strength (wired termin | |
| DIN DIN EN 60512-16-3 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008 | |
| DIN DIN EN 60512-16-4 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008); German version EN 6051 | |
| DIN DIN EN 60512-16-5 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN | |
| DIN DIN EN 60512-16-6 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008); German version EN 60512-16-6:2008 | |
| DIN DIN EN 60512-16-7 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German vers | |
| DIN DIN EN 60512-16-8 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (IEC 60512-16-8:2008); German | |
| DIN DIN EN 60512-16-9 | EN-Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 6051 | |
| DIN DIN EN 60512-19-3 | EN-Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests; section 3: Test 19c: Fluid resistance (IEC 60512-19-3:1997); German version | |
| DIN DIN EN 60512-2-1 | EN-Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance; Millivolt level method (IEC 60512-2-1:2002); German version EN |