DIN English - Electrical Engineering Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V. 1 2 3 > >
| DIN DIN 16873 | EN-Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for cable ducting - Dimensions and technical delivery conditions | |
| DIN DIN 16875 | EN-Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for buried ducting - Dimensions and technical delivery conditions | |
| DIN DIN 16876 | EN-High density polyethylene (PE-HD) pipes and fittings for buried ducting - Dimensions and technical delivery conditions | |
| DIN DIN 17122 | EN-Steel Conductor Contact Rails for Electric Traction; Technical Conditions of Delivery | |
| DIN DIN 1715-1 | EN-Thermostat metals; technical delivery conditions | |
| DIN DIN 1715-2 | EN-Thermostat metals; testing the specific thermal curvature | |
| DIN DIN 17405 | EN-Soft Magnetic Materials for Direct Current Relays; Technical Conditions of Delivery | |
| DIN DIN 17470 | EN-Heating conductor alloys; technical delivery conditions for round and flat wire | |
| DIN DIN 40613 | EN-Products Based on Built-up or Treated Mica Paper for Electrical Insulation; Insulating Laminae for Commutators; Dimensions | |
| DIN DIN 40614 | EN-Products Based on Built-up or Treated Mica Paper for Electrical Insulation; Laminated Wide and Small Strips; Dimensions | |
| DIN DIN 40618 | EN-Laminated Products; Laminated Moulded Tubes of Rectangular Cross-section Paper-base Laminate or Fabric-base Laminate | |
| DIN DIN 40633-3 | EN-Pressure-sensitive Adhesive Tapes Used for Electrical Insulation; Tapes with Thermosetting Lamina of Adhesive; Types Requirements Testing | |
| DIN DIN 41611-4 | EN-Solderless electrical connections; clip connections; terminology requirements testing | |
| DIN DIN 42538 | EN-Transformers; Fixing Arrangement for Bushings | |
| DIN DIN 42539-1 | EN-Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A Assembly | |
| DIN DIN 42539-2 | EN-Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A Single Parts | |
| DIN DIN 43156 | EN-Electric Traction; Conducter Rail; Dimensions and Characteristics | |
| DIN DIN 43539-1 | EN-Storage cells and batteries; testing; general information and general test methods | |
| DIN DIN 43628 | EN-Fuse boxes for circuit protection equipment | |
| DIN DIN 43673-1 | EN-Drilled holes and screw connections for busbars; Rectangular cross section busbars | |
| DIN DIN 43673-2 | EN-Drilled holes and screw connections for busbars; Channel section busbars | |
| DIN DIN 44767 | EN-Appliance Coupling for the Primary Connection of Resistance Welding Transformers 200 A 550 V | |
| DIN DIN 45635-12 | EN-Measurement of noise emitted by machines; Airborne noise measurement enveloping surface method; Electrical switchgear and control gear | |
| DIN DIN 46211 | EN-Stamped Cable Sockets for Copper Conductors | |
| DIN DIN 46288 | EN-Connecting Washers for Conductors | |
| DIN DIN 46420 | EN-Round Aluminium Wires for Electrical Purposes Drawn; Dimensions | |
| DIN DIN 46424 | EN-Switchgear; Extruded Channel Sections of Aluminium for Busbars | |
| DIN DIN 46425 | EN-Round Aluminium Wires for Electrical Purposes Exactly Drawn; Dimensions | |
| DIN DIN 46431 | EN-Round Copper Wires for Electrical Purposes; Precision Drawn Dimensions | |
| DIN DIN 46449 | EN-Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes Test Methods | |
| DIN DIN 46460-2 | EN-Winding Wires; Round Resistance Wires Enamelled Self-fluxing Type V; Technical Conditions of Delivery | |
| DIN DIN 46460-3 | EN-Winding Wires; Round Resistance Wires Enamelled Heat-resistant with a Temperature Index of 180 Type W 180; Technical Conditions of Delivery | |
| DIN DIN 47600-1 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Protective Joint Boxes | |
| DIN DIN 47600-2 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes | |
| DIN DIN 47600-3 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire | |
| DIN DIN 47600-4 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables | |
| DIN DIN 47600-5 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables | |
| DIN DIN 47600-6 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV | |
| DIN DIN 47600-7 | EN-Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV | |
| DIN DIN 48203-1 | EN-Copper wires and copper stranded conductors; technical delivery conditions | |
| DIN DIN 48203-2 | EN-Wrought copper alloy (Bz) wires and conductors; technical delivery conditions | |
| DIN DIN 48203-3 | EN-Steel wires and steel stranded conductors; technical delivery conditions | |
| DIN DIN 48203-7 | EN-Copper covered steel wires and copper covered steel stranded conductors; technical delivery conditions | |
| DIN DIN 49020 | EN-Conduit for Electrical Wiring; Screwed Steel Conduit Plain Conduit Couplers | |
| DIN DIN 50451-1 | EN-Determination of trace elements in liquids for use in semiconductor technology - Part 1: Determination of calcium copper gold iron potassium silver and sodium in nitric acid by atomic absorption spectrometry | |
| DIN DIN 50451-2 | EN-Determination of trace elements in liquids for use in semiconductor technology - Part 2: Determination of calcium chromium cobalt copper iron nickel and zinc in hydrofluoric acid by plasma emission spectroscopy | |
| DIN DIN 50451-3 | EN-Determination of traces of elements in liquids for use in semiconductor technology - Part 3: Determination of aluminium cobalt copper nickel sodium and zinc in nitric acid by inductively-coupled plasma mass spect | |
| DIN DIN 50452-1 | EN-Particle analysis of liquids for use in semiconductor technology by the microscopic particle determination | |
| DIN DIN 50452-3 | EN-Particle analysis in liquids for use in semiconductor technology - Part 3: Calibration of optical particle counters | |
| DIN DIN 50453-1 | EN-Gravimetric determination of etch rate of mixtures for etching silicon single crystals for use in semiconductor technology | |
| DIN DIN 50453-2 | EN-Spectrophotometric determination of etch rate of mixtures for etching silicon dioxide coatings for use in semiconductor technology | |
| DIN DIN 50455-2 | EN-Characterization of photoresists used in semiconductor technology - Part 2: Determination of photosensitivity of positive photoresists | |
| DIN DIN 50456-3 | EN-Characterization of encapsulating compounds for electronic components used in semiconductor technology - Part 3: Determination of cationic impurities | |
| DIN DIN 50460 | EN-Determination of magnetic properties of soft magnetic materials; general terminology and principles of measurement | |
| DIN DIN 51353 | EN-Testing of insulating oils; detection of corrosive sulfur; silber strip test | |
| DIN DIN 53483-1 | EN-Testing of Insulating Materials; Determination of Dielectric Properties; Definitions General Information | |
| DIN DIN 53483-2 | EN-Testing of Insulating Materials; Determination of Dielectric Properties; Testing at Standard Frequencies of 50 Hz 1 kHz 1 MHz | |
| DIN DIN 53483-3 | EN-Testing of Insulating Materials; Determination of Dielectric Properties; Measuring Cells for Liquids for Frequencies up to 100 MHz | |
| DIN DIN 53489 | EN-Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion | |
| DIN DIN 6281 | EN-Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines | |
| DIN DIN 89345 | EN-Earthing inserts for glands for electrical cables and insulated wires | |
| DIN DIN 89347 | EN-Washers for glands for electrical cables and insulated wires; Text in German and English | |
| DIN DIN 89349 | EN-Sealing rings for glands for electrical cables and insulated wires; Text in German and English | |
| DIN DIN EN 10252 | EN-Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies | |
| DIN DIN EN 10257-1 | EN-Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables | |
| DIN DIN EN 10257-2 | EN-Zinc or zinc alloy-coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables | |
| DIN DIN EN 10282 | EN-Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip; English version of DIN EN 10282 | |
| DIN DIN EN 10330 | EN-Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit | |
| DIN DIN EN 10331 | EN-Magnetic materials - Specification for sintered soft magnetic materials | |
| DIN DIN EN 10342 | EN-Magnetic materials - Classification of surface insulations of electrical steel sheet strip and laminations | |
| DIN DIN EN 12465 | EN-Wood poles for overhead lines - Durability requirements | |
| DIN DIN EN 12479 | EN-Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations | |
| DIN DIN EN 12509 | EN-Timber poles for overhead lines - Test methods - Determination of modulus of elasticity bending strength density and moisture content | |
| DIN DIN EN 12510 | EN-Wood poles for overhead lines - Strength grading criteria; English version of DIN EN 12510:2001 + AC:2002 | |
| DIN DIN EN 12511 | EN-Wood poles for overhead lines - Determination of characteristic values | |
| DIN DIN EN 12601 | EN-Reciprocating internal combustion engine driven generating sets - Safety; English version of DIN EN 12601 | |
| DIN DIN EN 13032-1 | EN-Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format | |
| DIN DIN EN 13032-2 | EN-Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places | |
| DIN DIN EN 13032-2 Berichtigung 1 | EN-Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places Corrigendum 1 to English version of DIN EN 13032-2:2005- |
1 2 3 > >