DIN English - Chemical Engineering Mining Paint Industry Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 14175-4 | EN-Fume cupboards - Part 4: On-site test methods | |
| DIN DIN EN 14175-6 | EN-Fume cupboards - Part 6: Variable air volume fume cupboards | |
| DIN DIN EN 14204 | EN-Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requiremen | |
| DIN DIN EN 14205 | EN-Natural stone test methods - Determination of Knoop hardness | |
| DIN DIN EN 1421 | EN-Chemicals used for treatment of water intended for human consumption - Ammonium chloride | |
| DIN DIN EN 14210 | EN-Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method | |
| DIN DIN EN 14213 | EN-Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods | |
| DIN DIN EN 14214 | EN-Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods (includes Amendment A1:2009) | |
| DIN DIN EN 14231 | EN-Natural stone test methods - Determination of the slip resistance by means of the pendulum tester | |
| DIN DIN EN 1425 | EN-Bitumen and bituminous binders - Characterization of perceptible properties | |
| DIN DIN EN 1426 | EN-Bitumen and bituminous binders - Determination of needle penetration | |
| DIN DIN EN 14260 | EN-Coal tar and pitch based binders and related products - Road tars - Characteristics and test methods | |
| DIN DIN EN 14261 | EN-Coal tar and pitch based binders and related products - Refractory binders - Characteristics and test methods | |
| DIN DIN EN 14262 | EN-Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Briquetting pitch - Characteristics and test methods | |
| DIN DIN EN 14263 | EN-Coal tar and pitch based binders and related products - Carbon binder pitch - Characteristics and test methods | |
| DIN DIN EN 14264 | EN-Coal tar and pitch based binders and related products - Impregnating pitch - Characteristics and test methods | |
| DIN DIN EN 14265 | EN-Coal tar and pitch based binders and related products - Painting tar - Characteristics and test methods | |
| DIN DIN EN 14266 | EN-Coal tar and pitch based binders and related products - Coating tar - Characteristics and test methods | |
| DIN DIN EN 1427 | EN-Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method | |
| DIN DIN EN 14274 | EN-Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) | |
| DIN DIN EN 14275 | EN-Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers | |
| DIN DIN EN 1428 | EN-Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method | |
| DIN DIN EN 1429 | EN-Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions and determination of storage stability by sieving | |
| DIN DIN EN 1430 | EN-Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions | |
| DIN DIN EN 1431 | EN-Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation | |
| DIN DIN EN 14331 | EN-Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method | |
| DIN DIN EN 14347 | EN-Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1) | |
| DIN DIN EN 14349 | EN-Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanic | |
| DIN DIN EN 14368 | EN-Products used for treatment of water intended for human consumption - Manganese dioxide coated limestone | |
| DIN DIN EN 14369 | EN-Products used for treatment of water intended for human consumption - Iron coated granular activated alumina | |
| DIN DIN EN 14370 | EN-Surface active agents - Determination of surface tension | |
| DIN DIN EN 14371 | EN-Surface active agents - Determination of foamability and degree of foamability - Circulation test method | |
| DIN DIN EN 14456 | EN-Products used for treatment of water intended for human consumption - Bone charcoal | |
| DIN DIN EN 14470-1 | EN-Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids | |
| DIN DIN EN 14470-2 | EN-Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders | |
| DIN DIN EN 14480 | EN-Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method | |
| DIN DIN EN 14480 Berichtigung 1 | EN-Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; Corrigendum 1 to DIN EN 14480:2004-11 | |
| DIN DIN EN 14579 | EN-Natural stone test methods - Determination of sound speed propagation | |
| DIN DIN EN 14580 | EN-Natural stone test methods - Determination of static elastic modulus | |
| DIN DIN EN 14581 | EN-Natural stone test methods - Determination of linear thermal expansion coefficient | |
| DIN DIN EN 14591-2 | EN-Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers | |
| DIN DIN EN 14591-4 | EN-Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers | |
| DIN DIN EN 14624 | EN-Performances of mobile leak detectors and of room controllers of halogenated refrigerants | |
| DIN DIN EN 14639 | EN-Crude tar and crude benzole - Characteristics and test methods | |
| DIN DIN EN 14664 | EN-Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate solid | |
| DIN DIN EN 14666 | EN-Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method | |
| DIN DIN EN 14667 | EN-Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method | |
| DIN DIN EN 14668 | EN-Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method | |
| DIN DIN EN 14669 | EN-Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method | |
| DIN DIN EN 1467 | EN-Natural stone - Rough blocks - Requirements | |
| DIN DIN EN 14670 | EN-Surface active agents - Sodium dodecyl sulfate - Analytical method | |
| DIN DIN EN 14675 | EN-Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (pha | |
| DIN DIN EN 14678-1 | EN-LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers (includes Amendment A1:2009) | |
| DIN DIN EN 14678-2 | EN-LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers and installation requirements | |
| DIN DIN EN 1468 | EN-Natural stone - Rough slabs - Requirements | |
| DIN DIN EN 14712 | EN-Surface active agents - Determination of physical stability in alkaline and acid solutions | |
| DIN DIN EN 14727 | EN-Laboratory furniture - Storage units for laboratories - Requirements and test methods | |
| DIN DIN EN 1473 | EN-Installation and equipment for liquefied natural gas - Design of onshore installations | |
| DIN DIN EN 14733 | EN-Bitumen and bituminous binders - Bituminous emulsions fluxed and cut-back bitumen factory production control | |
| DIN DIN EN 1474-1 | EN-Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms | |
| DIN DIN EN 1474-2 | EN-Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses | |
| DIN DIN EN 1474-3 | EN-Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems | |
| DIN DIN EN 14743 | EN-Water conditioning equipment inside buildings - Softeners - Requirements for performance safety and testing (includes Amendment A1:2007) | |
| DIN DIN EN 14769 | EN-Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) | |
| DIN DIN EN 14770 | EN-Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) | |
| DIN DIN EN 14771 | EN-Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) | |
| DIN DIN EN 14774-1 | EN-Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method | |
| DIN DIN EN 14774-2 | EN-Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method | |
| DIN DIN EN 14774-3 | EN-Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample | |
| DIN DIN EN 14775 | EN-Solid biofuels - Determination of ash content | |
| DIN DIN EN 14805 | EN-Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology | |
| DIN DIN EN 14832 | EN-Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids | |
| DIN DIN EN 14833 | EN-Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids | |
| DIN DIN EN 14865-1 | EN-Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate | |
| DIN DIN EN 14865-2 | EN-Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A1:2009) | |
| DIN DIN EN 14870-1 | EN-Petroleum and natural gas industries - Induction bends fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004 | |
| DIN DIN EN 14870-2 | EN-Petroleum and natural gas industries - Induction bends fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004 | |
| DIN DIN EN 14870-3 | EN-Petroleum and natural gas industries - Induction bends fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006 | |
| DIN DIN EN 14880 | EN-Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method |