DIN German - Chemical Engineering Mining Paint Industry Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN 51605 | EN-(DRAFT) Fuels for vegetable oil compatible combustion engines - Fuel from rapeseed oil - Requirements and test methods | |
| DIN DIN 51610 | EN-Testing of liquefied petroleum gases; sampling | |
| DIN DIN 51612 | EN-Testing of liquefied petroleum gases; calculation of net calorific value | |
| DIN DIN 51613 | EN-Testing of Liquefied Petroleum Gases; Determination of Elementary Sulphur and Residue on Evaporation | |
| DIN DIN 51614 | EN-Testing of liquefied petroleum gases; detection of ammonia water and alkaline solution | |
| DIN DIN 51618 | EN-Testing of liquefied petroleum gases; calculation of density at 15 °C 20 °C and 50 °C | |
| DIN DIN 51619 | EN-Testing of mineral oil hydrocarbons - Determination of the composition of liquid petroleum gases - Gas chromatographic analysis under special consideration of 13-butadiene with mass fractions ? 01 % (m/m) | |
| DIN DIN 51622 | EN-Liquefied petroleum gases; propane propene butane butene and their mixtures; requirements | |
| DIN DIN 51624 | EN-Automotive fuels - Compressed natural gas - Requirements and test methods | |
| DIN DIN 51625 | EN-Automotive fuels - Ethanol Fuel - Requirements and test methods | |
| DIN DIN 51626-1 | EN-Automotive fuels - Requirements and test methods - Part 1: Petrol E10 | |
| DIN DIN 51626-1 | EN-(DRAFT) Automotive fuels - Requirements and test methods - Part 1: Petrol E10 and petrol E5 | |
| DIN DIN 51626-2 | EN-(DRAFT) Automotive fuels - Requirements and test methods - Part 2: Petrol E5 | |
| DIN DIN 51627-3 | EN-(DRAFT) Automotive Fuels - Test methods - Part 3: GC determination of contents of alcohols ethers and petrol in ethanol fuel | |
| DIN DIN 51627-4 | EN-Automotive fuels - Test methods - Part 4: Determination of electrical conductivity in ethanol fuel | |
| DIN DIN 51627-5 | EN-(DRAFT) Automotive Fuels - Test methods - Part 5: Direct determination of trace elements in diesel fuels and blends of Diesel fuel with FAME contents of up to 20 % (V/V) by inductively coupled plasma optical emission | |
| DIN DIN 51627-6 | EN-(DRAFT) Automotive Fuels - Test methods - Part 6: Direct determination of trace elements in vegetable oils by inductively coupled plasma optical emission spectroscopy (ICP OES) | |
| DIN DIN 51630 | EN-Mineral spirits - Petroleum ether - Requirements | |
| DIN DIN 51631 | EN-Mineral spirits - Special boiling point spirits - Requirements | |
| DIN DIN 51632-1 | EN-Test spirit - Part 1: White spirit regular; Requirements and testing | |
| DIN DIN 51632-2 | EN-Test spirit - Part 2: White spirit low aromatics; Requirements and testing | |
| DIN DIN 51633 | EN-Benzene and benzene homologues - Requirements | |
| DIN DIN 51634 | EN-Mineral spirits; safety lamps mineral spirit; minimum requirements | |
| DIN DIN 51635 | EN-Mineral spirits - FAM standard mineral spirit - Requirements | |
| DIN DIN 51639-4 | EN-Testing of lubricants - Test methods - Part 4: Determination of vegetable oil fraction in used diesel motor oils using infrared spectrometry | |
| DIN DIN 51640 | EN-Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C | |
| DIN DIN 51650 | EN-Testing of mineral oils and related products - Determination of quantity | |
| DIN DIN 51666 | EN-Testing of petroleum products - Determination of composition for calculation of carbon content and calorific value of heating gas from refineries - Gas chromatography method | |
| DIN DIN 51700 | EN-Testing of solid fuels - Generalities and index of methods of test | |
| DIN DIN 51701-1 | EN-Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions | |
| DIN DIN 51701-2 | EN-Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling | |
| DIN DIN 51701-3 | EN-Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation | |
| DIN DIN 51701-4 | EN-Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment | |
| DIN DIN 51701-5 | EN-Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision | |
| DIN DIN 51705 | EN-Testing of solid fuels - Determination of the bulk density of solid fuels | |
| DIN DIN 51717 | EN-Testing of solid fuels; determination of mechanical strength of coke | |
| DIN DIN 51718 | EN-Testing of solid fuels - Determination of the water content and the moisture of analysis sample | |
| DIN DIN 51719 | EN-Testing of solid fuels - Solid mineral fuels - Determination of ash content | |
| DIN DIN 51720 | EN-Testing of solid fuels - Determination of volatile matter content | |
| DIN DIN 51721 | EN-Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method | |
| DIN DIN 51722-1 | EN-Testing of solid fuels; determination of nitrogen content; semi-micro Kjeldahl method | |
| DIN DIN 51723 | EN-Testing of solid fuels - Determination of fluorine content | |
| DIN DIN 51724-1 | EN-Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur | |
| DIN DIN 51724-2 | EN-Testing of solid fuels - Determination of sulfur content - Part 2: Species | |
| DIN DIN 51724-3 | EN-Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods | |
| DIN DIN 51725 | EN-Testing of solid fuels - Determination of the phosphorus content | |
| DIN DIN 51726 | EN-Testing of solid fuels - Determination of the carbonate carbon dioxide content | |
| DIN DIN 51727 | EN-Testing of solid fuels - Determination of chlorine content | |
| DIN DIN 51729-10 | EN-Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray fluorescence analysis | |
| DIN DIN 51729-10 | EN-(DRAFT) Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray fluorescence analysis | |
| DIN DIN 51729-11 | EN-Testing of solid fuels - Determination of chemical composition of fuel ash - Part 11: Determination by inductively coupled plasma emission spectrometry (ICP-OES) | |
| DIN DIN 51729-8 | EN-Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<sub>2</sub>O K<sub>2</sub>O) contents | |
| DIN DIN 51730 | EN-Testing of solid fuels - Determination of fusibility of fuel ash | |
| DIN DIN 51731 | EN-Testing of solid fuels - Compressed untreated wood - Requirements and testing | |
| DIN DIN 51732 | EN-Testing of solid mineral fuels - Determination of total carbon hydrogen and nitrogen - Instrumental methods | |
| DIN DIN 51733 | EN-Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content | |
| DIN DIN 51734 | EN-Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon | |
| DIN DIN 51735 | EN-Testing of solid fuels - Determination of plastic properties of coal with the Gieseler Plastometer | |
| DIN DIN 51739 | EN-Testing of solid fuels - Determination of the dilatation of coal | |
| DIN DIN 51741 | EN-Testing of solid fuels - Determination of the crucible swelling number of coal | |
| DIN DIN 51742 | EN-Testing of solid fuels - Determination of Hardgrove grindability index of hard coal | |
| DIN DIN 51750-1 | EN-Sampling of petroleum products; general information | |
| DIN DIN 51750-2 | EN-Sampling of liquid petroleum products | |
| DIN DIN 51750-3 | EN-Sampling of pasty and solid petroleum products | |
| DIN DIN 51755 | EN-Testing of Mineral Oils and Other Combustible Liquids; Determination of Flash Point by the Closed Tester according to Abel-Pensky | |
| DIN DIN 51756-1 | EN-Determination of knock characteristics (octane number) of petrol; general | |
| DIN DIN 51756-3 | EN-Testing of liquid and gaseous fuels; determination of knocking characteristics (octane number); determination with the BASF-motor | |
| DIN DIN 51756-7 | EN-Testing of gasolines; determination of knock characteristics (octane number) of alcohols and alcohol/fuel mixtures using the CFR engine | |
| DIN DIN 51757 | EN-Testing of mineral oils and related materials; determination of density | |
| DIN DIN 51757 | EN-(DRAFT) Testing of mineral oils and related materials - Determination of density | |
| DIN DIN 51757 Beiblatt 1 | EN-(DRAFT) Testing of mineral oils and related materials - Determination of density - Supplement 1: Guidance on the use of DIN 51757 | |
| DIN DIN 51761 | EN-Testing of benzene and benzene homologues - Determination of distillation range by Kraemer-Spilker | |
| DIN DIN 51762 | EN-Testing of liquid fuels - Determination of reaction to sulphuric acid | |
| DIN DIN 51769-6 | EN-Determination of total lead content of petrol with a lead content exceeding 25 mg/l by wavelenght-dispersive X-ray spectrometry (XRS) | |
| DIN DIN 51769-9 | EN-Testing of petroleum products; determination of the lead content (total lead) of liquid mineral oil hydrocarbons with a mass fraction of lead of 50 to 1000 µg/kg; iodine monochlorid disentegratien; extraction with d | |
| DIN DIN 51773 | EN-Testing of liquid fuels - Determination of ignition quality (cetane number) of Diesel fuels with the BASF-engine | |
| DIN DIN 51774-1 | EN-Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance of more than 05 g/100 g (BA) | |
| DIN DIN 51774-2 | EN-Testing of liquid fuels; determination of bromine acceptance by electrometric Dead-Stop-method of samples with a bromine acceptance up to 05 g/100 g (BB) | |
| DIN DIN 51774-3 | EN-Testing of liquid fuels; determination of bromine acceptance by iodometric method (BC) |