DIN German - Chemical Engineering Mining Paint Industry Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN 51426 | EN-(DRAFT) Testing of fuel oil - Spectrophotometric determination of the red dye content in domestic fuel oil - Complementary element | |
| DIN DIN 51426 | EN-Testing of fuel oil - Spectrophotometric determination of the red dye content and marker-2-content in domestic fuel oil | |
| DIN DIN 51429-1 | EN-Testing of petroleum products - Determination of selected trace elements - Part 1: Atomic absorption spectrometry after specific incineration and digestion methods | |
| DIN DIN 51430 | EN-(DRAFT) Testing of fuel oil - Determination of red dye content and Solvent Yellow 124 in domestic fuel oil and mixtures of domestic fuel oil with unmarked mineral oil - High pressure liquid chromatography (HPLC) | |
| DIN DIN 51431-1 | EN-Testing of lubricants - Determination of the magnesium content - Part 1: Direct determination by atomic absorption spectrometry | |
| DIN DIN 51431-2 | EN-Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF) | |
| DIN DIN 51432 | EN-Testing of used oils; determination of the percentage of water solvents and the distillation residue in used oil; distillation method | |
| DIN DIN 51433 | EN-Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method | |
| DIN DIN 51435 | EN-Testing of petroleum products - Determination of boiling range distribution - Gas chromatography method | |
| DIN DIN 51436 | EN-Testing of petroleum products - Determination of the content of icing inhibitor in aviation turbine fuels - Infrared spectrometry | |
| DIN DIN 51437 | EN-Testing of benzene and benzene homologues - Determination of the non-aromatics toluene and C<sub>8</sub>-aromatics content of benzene - Gas chromatography | |
| DIN DIN 51438 | EN-Testing of benzene and benzene homologues - Determination of the thiophene content of benzene - Gas chromatography | |
| DIN DIN 51440-1 | EN-Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS) | |
| DIN DIN 51441 | EN-Testing of mineral products - Determination of the microbial colony number in petroleum products with a boiling range below 400 °C | |
| DIN DIN 51443 | EN-Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS) | |
| DIN DIN 51443-2 | EN-Testing of lubricants - Determination of the boron content - Part 2: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) | |
| DIN DIN 51444 | EN-Testing of petroleum products - Determination of nitrogen - Oxidative combustion method with chemiluminescence detector | |
| DIN DIN 51448-1 | EN-Testing of liquid petroleum hydrocarbons - Determination of hydrocarbon types - Part 1: Gas chromatographic analysis by column switching procedure | |
| DIN DIN 51451 | EN-Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles | |
| DIN DIN 51452 | EN-Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry | |
| DIN DIN 51453 | EN-Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method | |
| DIN DIN 51460-1 | EN-Testing of petroleum products - Method for sample preparation - Part 1: Microwave incineration | |
| DIN DIN 51471 | EN-Liquid petroleum products - Determination of storage stability of fuel oil EL | |
| DIN DIN 51480-1 | EN-(DRAFT) Electrorheological suspensions - Requirements testing and application - Part 1: Basics and field strength independent properties | |
| DIN DIN 51502 | EN-Designation of lubricants and marking of lubricant containers equipment and lubricating points | |
| DIN DIN 51503-1 | EN-(DRAFT) Lubricants - Refrigerator oils - Part 1: Specifications | |
| DIN DIN 51503-1 | EN-Lubricants - Refrigerator oils - Part 1: Specifications | |
| DIN DIN 51503-2 | EN-Lubricants - Refrigerator oils - Part 2: Used refrigerator oils | |
| DIN DIN 51506 | EN-Lubricants; VB and VC lubricating oils with and without additives and VDL lubricating oils; classification and requirements | |
| DIN DIN 51509-1 | EN-Selection of lubricants for gears; gear lubricating oils | |
| DIN DIN 51509-2 | EN-Lubricants; selection for lubricants for gears; semi-fluid lubricants | |
| DIN DIN 51514 | EN-Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method | |
| DIN DIN 51515-1 | EN-Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service | |
| DIN DIN 51515-2 | EN-Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service | |
| DIN DIN 51517-1 | EN-Lubricants - Lubricating oils - Part 1: Lubricating oils C; Minimum requirements | |
| DIN DIN 51517-2 | EN-Lubricants - Lubricating oils - Part 2: Lubricating oils CL; Minimum requirements | |
| DIN DIN 51517-3 | EN-Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Minimum requirements | |
| DIN DIN 51520 | EN-Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications | |
| DIN DIN 51520 | EN-(DRAFT) Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications | |
| DIN DIN 51521 | EN-Lubricants - Metal working fluids - Water mix metal working fluids SE; specifications | |
| DIN DIN 51521 | EN-(DRAFT) Lubricants - Metalworking fluids - Water mix metal working fluids SE; specifications | |
| DIN DIN 51522 | EN-Heat transfer fluids Q - Specifications test | |
| DIN DIN 51524-1 | EN-Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements | |
| DIN DIN 51524-1 Berichtigung 1 | EN-Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements Corrigendum to DIN 51524-1:2006-04 | |
| DIN DIN 51524-2 | EN-Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements | |
| DIN DIN 51524-2 Berichtigung 1 | EN-Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements Corrigenda to DIN 51524-2:2006-04 | |
| DIN DIN 51524-3 | EN-Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements | |
| DIN DIN 51524-3 Berichtigung 1 | EN-Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements Corrigenda to DIN 51524-3:2006-04 | |
| DIN DIN 51528 | EN-Testing of mineral oils and related products - Determination of thermostability of unused heat transfer fluids | |
| DIN DIN 51529 | EN-Testing of mineral oils and related products - Testing and evaluation of used heat transfer fluids | |
| DIN DIN 51535 | EN-Testing of petroleum products - Determination of deposition forming tendency in exhaust turbochargers and intercoolers of supercharged diesel engines | |
| DIN DIN 51538 | EN-Testing of lubricants - Testing of resistance of refrigerator oils to ammonia | |
| DIN DIN 51551-1 | EN-Testing of lubricants and liquid fuels - Determination of the carbon residue - Part 1: Conradson method | |
| DIN DIN 51554-1 | EN-Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose sampling ageing | |
| DIN DIN 51554-2 | EN-Testing of mineral oils; test of susceptibility to ageing according to Baader; testing at 110 °C | |
| DIN DIN 51554-3 | EN-Testing of mineral oils; Test of susceptibility to ageing according to Baader; Testing at 95 °C | |
| DIN DIN 51558-1 | EN-Testing of Mineral Oils; Determination of the Neutralization Number Colour-indicator titration | |
| DIN DIN 51558-2 | EN-Testing of mineral oils; determination of neutralization number; color-indicator titration insulating oils | |
| DIN DIN 51559-1 | EN-Testing of mineral oils - Determination of the saponification number - Part 1: Saponification numbers above 2 colorindicator titration | |
| DIN DIN 51559-2 | EN-Testing of mineral oils - Determination of saponification number - Part 2: Color-indicator titration insulating oils | |
| DIN DIN 51563 | EN-(DRAFT) Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m | |
| DIN DIN 51563 | EN-Testing of Mineral Oils and Related Materials; Determination of Viscosity Temperature Relation; Slope m | |
| DIN DIN 51574 | EN-Testing of lubricants - Sampling of lubricating oils from internal combustion engines | |
| DIN DIN 51575 | EN-Testing of petroleum products; determination of sulfated ash | |
| DIN DIN 51575 | EN-(DRAFT) Testing of mineral oils - Determination of sulfated ash | |
| DIN DIN 51576 | EN-Testing of mineral oil hydrocarbons - Determination of salt content | |
| DIN DIN 51577-4 | EN-Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments | |
| DIN DIN 51579 | EN-Testing of paraffin - Determination of needle penetration | |
| DIN DIN 51580 | EN-Testing of petroleum waxes - Determination of cone penetration | |
| DIN DIN 51581-1 | EN-(DRAFT) Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test | |
| DIN DIN 51581-1 | EN-Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test | |
| DIN DIN 51581-2 | EN-Testing of petroleum products - Determination of evaporation loss - Part 2: Gas chromatographic method | |
| DIN DIN 51589-1 | EN-Determination of water separation ability of lubricating oils and low-flammability fluids after contact with steam | |
| DIN DIN 51595 | EN-Testing of petroleum products - Determination of the content of asphaltenes - Precipitation with heptane | |
| DIN DIN 51603-1 | EN-Liquid fuels - Fuel oils - Part 1: Fuel oils EL specifications | |
| DIN DIN 51603-3 | EN-Liquid fuels - Fuel oils - Part 3: Fuel oil S; Minimum requirements | |
| DIN DIN 51603-5 | EN-Liquid fuels - Fuel oils - Part 5: Fuel oils SA; Minimum requirements | |
| DIN DIN 51604-1 | EN-FAM testing fluid for polymer materials; Composition and requirements | |
| DIN DIN 51604-2 | EN-Methanolic FAM testing fluid for polymer materials; composition and requirements |