DIN English - Aircraft and Space Vehicle Engineering Collection
This collection contains documents from the following standards organization(s): Deutsches Institut Fur Normung E.V.
| DIN DIN EN 2997-007 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 007: | |
| DIN DIN EN 2997-008 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 008: | |
| DIN DIN EN 2997-009 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 009: | |
| DIN DIN EN 2997-010 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 010: | |
| DIN DIN EN 2997-011 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 011: | |
| DIN DIN EN 2997-012 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 012: | |
| DIN DIN EN 2997-013 | EN-Aerospace series - Connectors electrical circular coupled by threaded ring fire-resistant or non fire-resistant operating temperatures -65 °C to 175 °C continuous 200 °C continuous 260 °C peak - Part 013: | |
| DIN DIN EN 2998 | EN-Aerospace series - Washers flat in heat resisting steel passivated; German version EN 2998:1996 | |
| DIN DIN EN 3001 | EN-(DRAFT) Aerospace series; tempered float glass plies for aircraft applications; technical specification | |
| DIN DIN EN 3004 | EN-Aerospace series - Nuts self-locking MJ theads in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997 | |
| DIN DIN EN 3005 | EN-Aerospace series - Nuts self-locking MJ threads in heat resisting nickel base alloy NI-PH1302 (Waspaloy) silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specifica | |
| DIN DIN EN 3006 | EN-Aerospace series - Screws hexagon head relieved shank long thread in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994 | |
| DIN DIN EN 3007 | EN-Aerospace series - Bolts hexagon head relieved shank long thread in heat resisting steel FE-PA92HT (A286) silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996 | |
| DIN DIN EN 3008 | EN-Aerospace series - Bolts hexagon head relieved shank long thread in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998 | |
| DIN DIN EN 3009 | EN-Aerospace series - Bolts hexagon head relieved shank long thread in heat resisting nickel base alloy NI-P100HT (Inconel 718) silver plated - Classification: 1275 MPa/650 °C silver plated; German version EN 300 | |
| DIN DIN EN 3010 | EN-Aerospace series - Bolts hexagon head relieved shank long thread in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998 | |
| DIN DIN EN 3011 | EN-Aerospace series - Bolts hexagon head relieved shank long thread in heat resisting nickel base alloy NI-P101HT (Waspaloy) silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998 | |
| DIN DIN EN 3012 | EN-Aerospace series - Nuts bihexagonal self-locking in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995 | |
| DIN DIN EN 3014 | EN-Aerospace series - Shank nuts self-locking serrated in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3014:2001 | |
| DIN DIN EN 3015 | EN-Aerospace series - Shank nuts self-locking serrated in heat resisting steel FE-PA2601 (A286) silver plated - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3015:2001 | |
| DIN DIN EN 3016 | EN-Aerospace series - Washers countersunk load spreading - Heat resisting steel; German and English version EN 3016:2008 | |
| DIN DIN EN 3017 | EN-Aerospace series - Washers facing/packing - Heat resisting steel; German and English version EN 3017:2008 | |
| DIN DIN EN 3019 | EN-Aerospace series - Self-locking plate nuts floating two-lug in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3019:2008 | |
| DIN DIN EN 3020 | EN-Aerospace series - Self-locking plate nuts floating two-lug in heat resisting steel FE-PA92HT (A286) silver-plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3020:2 | |
| DIN DIN EN 3026 | EN-Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994 | |
| DIN DIN EN 3027 | EN-Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994 | |
| DIN DIN EN 3030 | EN-Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994 | |
| DIN DIN EN 3032 | EN-Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994 | |
| DIN DIN EN 3033 | EN-Aerospace series - Nuts self-locking hexagonal with captive washer in heat resisting steel FE-PA2601 (A286) uncoated - Classification: 1100 MPa/425 °C; German and English version EN 3033:2008 | |
| DIN DIN EN 3034 | EN-Aerospace series - Nuts self-locking hexagonal with captive washer - In heat resisting steel FE-PA92HT (A286) silver coated - Classification 1100 MPa/425 °C; German and English version EN 3034:2009 | |
| DIN DIN EN 3035 | EN-Aerospace series - 100° countersunk normal head offset cruciform recess close tolerance normal shank short thread in alloy steel cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German | |
| DIN DIN EN 3037 | EN-Aerospace series - Screws pan head offset cruciform recess close tolerance normal shank short thread in titanium alloy anodized MoS<sub>2</sub> lubricated - Classification: 1100 MPa(at ambient temperature)/315 | |
| DIN DIN EN 3038 | EN-Aerospace series - Screws pan head offset cruciform recess close tolerance normal shank short thread in heat and corrosion resisting steel passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; | |
| DIN DIN EN 3043 | EN-Aerospace series - Fasteners externally threaded in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa/650 °C manufacturing method optional - Technical specification; German and English version EN 30 | |
| DIN DIN EN 3044 | EN-Aerospance series - Installation holes for inserts screw thread helical coil self-locking - Design standard; German version EN 3044:1998 | |
| DIN DIN EN 3045 | EN-Aerospace series; bearings airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993 | |
| DIN DIN EN 3046 | EN-Aerospace series; bearings airframe rolling; rigid single row ball bearings in steel cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993 | |
| DIN DIN EN 3047 | EN-Aerospace series; bearings airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993 | |
| DIN DIN EN 3048 | EN-Aerospace series - Bearings spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2 | |
| DIN DIN EN 3049 | EN-Aerospace series - O-rings in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998 | |
| DIN DIN EN 3050 | EN-Aerospace series - O-rings in fluorocarbon rubber (FKM) low compression set - Technical specification; German version EN 3050:1998 | |
| DIN DIN EN 3052 | EN-Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in heat and corrosion resisting steel passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and E | |
| DIN DIN EN 3053 | EN-Aerospace series; bearings; airframe rolling single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994 | |
| DIN DIN EN 3054 | EN-Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel cadmium plated; dimensions and loads; German version EN 3054:1994 | |
| DIN DIN EN 3055 | EN-Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994 | |
| DIN DIN EN 3056 | EN-Aerospace series; bearings airframe rolling rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994 | |
| DIN DIN EN 3057 | EN-Aerospace series; bearings airframe rolling rigid double row ball bearings in steel cadmium plated; dimensions and loads; German version EN 3057:1994 | |
| DIN DIN EN 3058 | EN-Aerospace series; bearings airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994 | |
| DIN DIN EN 3059 | EN-Aerospace series - Bearings airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing cadmium plated - Dimensions and loads; German and English version EN 3059:2007 | |
| DIN DIN EN 3060 | EN-Aerospace series - Bearings airframe rolling - Rigid single row ball bearings in steel cadmium plated with flanged alignment housing cadmium plated - Dimensions and loads; German and English version EN 3060:2007 | |
| DIN DIN EN 3061 | EN-Aerospace series - Bearings airframe rolling - Rigid single row ball bearings in corrosion resisting steel with flanged alignment housing - Dimensions and loads; German and English version EN 3061:2007 | |
| DIN DIN EN 3063 | EN-Aerospace series - Bolts double hexagon head close tolerance shank medium length thread in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German | |
| DIN DIN EN 3064 | EN-Aerospace series - Shank nuts self-locking serrated - Installation procedure; German version EN 3064:1996 | |
| DIN DIN EN 3065 | EN-Aerospace series - Installation holes for self-locking serrated shank nuts; design Standard; German version EN 3065:1996 | |
| DIN DIN EN 3071 | EN-(DRAFT) Aerospace series - Straight bending of sheets and strips in aluminium and aluminium alloys - Dimensioning methods and calculations of developed lengths | |
| DIN DIN EN 3079 | EN-Aerospace series - Pipe coupling 8°30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006 | |
| DIN DIN EN 3080 | EN-Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees reduced branch with thrust wire nut; German and English version EN 3080:2006 | |
| DIN DIN EN 3081 | EN-Aerospace series - Pipe coupling 8°30? in titanium alloy - Ferrules welded with dynamic beam seal end for repair; German version EN 3081:2001 | |
| DIN DIN EN 3082 | EN-Aerospace series - Pipe coupling 8°30? in titanium alloy - Unions bulkhead welded end for repair; German and English version EN 3082:2001 + AC:2003 | |
| DIN DIN EN 3083 | EN-Aerospace series - Pipe coupling 8°30? in titanium alloy - Unions bulkhead long welded end for repair; German and English version EN 3083:2001 + AC:2003 | |
| DIN DIN EN 3084 | EN-Aerospace series - Pipe coupling 8°30? in titanium alloy - Unions welded end threaded for repair; German and English version EN 3084:2001 + AC:2003 | |
| DIN DIN EN 3094 | EN-(DRAFT) Aerospace series - Sealants - Test method; determination of application time | |
| DIN DIN EN 3095 | EN-(DRAFT) Aerospace series - Sealants - Test method - Determination of extended assembly time | |
| DIN DIN EN 3096 | EN-(DRAFT) Aerospace series - Sealants - Test method; determination of tack-free time | |
| DIN DIN EN 3112 | EN-Aerospace series - Bolts normal hexagonal head threaded to head in alloy steel cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3112:1995 | |
| DIN DIN EN 3114-001 | EN-Aerospace series - Test method - Microstructure of (a + ss) titanium alloy wrought products - Part 001: General requirements; German and English version EN 3114-001:2006 | |
| DIN DIN EN 3114-002 | EN-Aerospace series - Test method - Microstructure of (a + ß) titanium alloy wrought products - Part 002: Microstructure of bars sections forging stock and forgings; German and English version EN 3114-002:2007 | |
| DIN DIN EN 3114-003 | EN-Aerospace series - Test method - Microstructure of (a + ss) titanium alloy wrought products - Part 003: Microstructure of plate; German and English version EN 3114-003:2006 | |
| DIN DIN EN 3114-004 | EN-Aerospace series - Test method - Microstructure of (a + ss) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming; German and English version EN 3114-004:2006 | |
| DIN DIN EN 3115 | EN-Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D = 10 mm; German and English version EN 3115:2009 | |
| DIN DIN EN 3120 | EN-(DRAFT) Aerospace series - Titanium alloy TI-P64003 cold worked and stress relieved - Seamless tube for pressure systems 4 mm ?D? 51 mm 690 MPa ?R<sub>m</sub>? 1030 MPa | |
| DIN DIN EN 3135 | EN-Aerospace series - Rivets solid universal head in corrosion resisting steel FE-PA11 passivated inch based series; German version EN 3135:1996 | |
| DIN DIN EN 3137 | EN-(DRAFT) Aerospace series; rivets solid 100° normal countersunk head with dome in corrosion resisting steel FE-PA11 passivated | |
| DIN DIN EN 3138 | EN-Aerospace series - Rivets solid 100° countersunk normal head with dome in corrosion resisting steel FE-PA2601 passivated inch based series; German version EN 3138:2001 | |
| DIN DIN EN 3139 | EN-Aerospace series - Rivets solid 100° countersunk normal head in corrosion resisting steel FE-PA11 passivated inch based series; German version EN 3139:2001 | |
| DIN DIN EN 3140 | EN-Aerospace series - Rivets solid 100° countersunk normal head in corrosion resisting steel FE-PA2601 passivated inch based series; German version EN 3140:2001 | |
| DIN DIN EN 3141 | EN-Aerospace series - Rivets solid universal head in head resisting nickel base alloy NI-P11 cadmium plated inch based series; German version EN 3141:1996 | |
| DIN DIN EN 3142 | EN-Aerospace series - Rivets solid universal head in heat resisting nickel base alloy NI-P11 inch based series; German version EN 3142:1996 | |
| DIN DIN EN 3145 | EN-Aerospace series - Round bars hot rolled in steel - Normal tolerances; Diameter 6 mm ? D ? 250 mm; Dimensions; German and English version EN 3145:2001 |