DS - Wood Technology Collection
This collection contains documents from the following standards organization(s): Dansk Standard 1 2 3 4 > >
| DANSK DS 1111 | EN-Glued timber structures - Delamination test | |
| DANSK DS 1118 | EN-Glued timber structures - Glued laminated timber - Production and control | |
| DANSK DS 146 | EN-Coniferous sawn timber - Cross section sizes and lengths | |
| DANSK DS 2191.0 | EN-Measurement of noise from woodworking machines - Part 0: Guidelines | |
| DANSK DS 2191.1 | EN-Measurement of noise from woodworking machines - Part 1: Determination of sound pressure level at the operator's and other specified positions around the machine | |
| DANSK DS 2191.2 | EN-Measurement of noise from woodworking machines - Part 2: Operating conditions for single blade circular saw benches | |
| DANSK DS 2191.3 | EN-Measurement of noise from woodworking machines - Part 3: Operating conditions for planing machines | |
| DANSK DS 2191.4 | EN-Measurement of noise from woodworking machines - Part 4: Operating conditions for thickness planing machines | |
| DANSK DS 2191.5 | EN-Measurement of noise from woodworking machines - Part 5: Operating conditions for single spindle moulding machines | |
| DANSK DS 2191.6 | EN-Measurement of noise from woodworking machines - Part 6: Operating conditions for double-end profiling machines | |
| DANSK DS 2191.7 | EN-Measurement of noise from woodworking machines - Part 7: Operating conditions for edge banding machines | |
| DANSK DS 2191.8 | EN-Measurement of noise from woodworking machines - Part 8: Operating conditions for double-end sizing and edge banding machines | |
| DANSK DS 2191.9 | EN-Measurement of noise from woodworking machines - Part 9: Operating conditions for two-side and multi-side planing and moulding machines | |
| DANSK DS-h+ | EN-Timber products - Standards and CE-marking | |
| DANSK DS/CEN/CR 14244 | EN-Durability of wood and wood-based products - Recommendations for measurement of emissions to the environment from treated wood in service | |
| DANSK DS/CEN/TR 15046 | EN-Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure | |
| DANSK DS/CEN/TR 15314 | EN-Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood | |
| DANSK DS/CEN/TS 1099 | EN-Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes | |
| DANSK DS/CEN/TS 12169 | EN-Criteria for the assessment of conformity of a lot of sawn timber | |
| DANSK DS/CEN/TS 12872 | EN-Wood-based panels - Guidance on the use of load-bearing boards in floors walls and roofs | |
| DANSK DS/CEN/TS 13307-2 | EN-Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control | |
| DANSK DS/CEN/TS 13810-2 | EN-Wood-based panels - Floating floors - Part 2: Test methods | |
| DANSK DS/CEN/TS 14966 | EN-Wood-based panels - Small scale indicative test methods for certain mechanical properties | |
| DANSK DS/CEN/TS 15003 | EN-Durability of wood and wood-based products - Criteria for hot air processes for curative uses against wood destroying organisms | |
| DANSK DS/CEN/TS 15083-1 | EN-Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi test methods - Part 1: Basidiomycetes | |
| DANSK DS/CEN/TS 15083-2 | EN-Durability of wood and wood-based products - Determination of natural durability of solid wood against wood-destroying fungi test methods - Part 2: Soft rotting micro-fungi | |
| DANSK DS/CEN/TS 15534-1 | EN-Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products | |
| DANSK DS/CEN/TS 15534-2 | EN-Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials | |
| DANSK DS/CEN/TS 15534-3 | EN-Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products | |
| DANSK DS/CEN/TS 15676 | EN-Wood flooring - Slip resistance - Pendulum test | |
| DANSK DS/CEN/TS 15679 | EN-Thermal Modified Timber - Definitions and characteristics | |
| DANSK DS/CEN/TS 15717 | EN-Parquet flooring - General guideline for installation | |
| DANSK DS/CEN/TS 635-4 | EN-Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing guideline | |
| DANSK DS/EN 1001-1 | EN-Durability of wood and wood-based products - Terminology - List of equivalent terms | |
| DANSK DS/EN 1001-2 | EN-Durability of wood and wood based products - Terminology - Part 2: Vocabulary | |
| DANSK DS/EN 1058 | EN-Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values | |
| DANSK DS/EN 1072 | EN-Plywood - Description of bending properties for structural plywood | |
| DANSK DS/EN 1087-1 | EN-Particleboards - Determination of moisture resistance - Part 1: Boil test | |
| DANSK DS/EN 1128 | EN-Cement-bonded particleboards - Determination of hard body impact resistance | |
| DANSK DS/EN 1194 | EN-Timber structures - Glued laminated timber - Strength classes and determination of characteristic values | |
| DANSK DS/EN 120 | EN-Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method | |
| DANSK DS/EN 12103 | EN-Resilient floor coverings - Agglomerated cork underlays - Specification | |
| DANSK DS/EN 12104 | EN-Resilient floor coverings - Cork floor tiles - Specification | |
| DANSK DS/EN 12105 | EN-Resilient floor coverings - Determination of moisture content of agglomerated composition cork | |
| DANSK DS/EN 1218-1 + A1 | EN-Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table | |
| DANSK DS/EN 1218-2 + A1 | EN-Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains | |
| DANSK DS/EN 1218-3 + A1 | EN-Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers | |
| DANSK DS/EN 1218-4 + A2 | EN-Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) | |
| DANSK DS/EN 1218-5 + A1 | EN-Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain | |
| DANSK DS/EN 12246 | EN-Quality classification of timber used in pallets and packaging | |
| DANSK DS/EN 12248 | EN-Sawn timber used in industrial packaging - Permitted deviations and preferential sizes | |
| DANSK DS/EN 12249 | EN-Sawn timber used in pallets - Permitted deviations and guidelines for dimensions | |
| DANSK DS/EN 12369-1 | EN-Wood-based panels - Characteristic values for structural design - Part 1: OSB particleboards and fibreboards | |
| DANSK DS/EN 12369-2 | EN-Wood-based panels - Characteristic values for structural design - Part 2: Plywood | |
| DANSK DS/EN 12369-3 | EN-Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels | |
| DANSK DS/EN 12455 | EN-Resilient floor coverings - Specification for corkment underlay | |
| DANSK DS/EN 12465 | EN-Timber poles for overhead lines - Durability requirements | |
| DANSK DS/EN 12479 | EN-Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations | |
| DANSK DS/EN 12490 | EN-Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood | |
| DANSK DS/EN 12509 | EN-Timber poles for overhead lines - Test methods - Determination of modulus of elasticity bending strength density and moisture content | |
| DANSK DS/EN 12510 | EN-Wood poles for overhead lines - Strength grading criteria | |
| DANSK DS/EN 12510/ac | EN-Wood poles for overhead lines - Strength grading criteria | |
| DANSK DS/EN 12511 | EN-Wood poles for overhead lines - Determination of characteristic values | |
| DANSK DS/EN 12750 + A1 | EN-Safety of woodworking machines - Four-sided moulding machines | |
| DANSK DS/EN 12775 | EN-Solid wood panels - Classification and terminology | |
| DANSK DS/EN 12779 + A1 | EN-Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements | |
| DANSK DS/EN 12781 | EN-Wall coverings - Specification for cork panels | |
| DANSK DS/EN 12871 | EN-Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors walls and roofs | |
| DANSK DS/EN 13017-1 | EN-Solid wood panels - Classification by surface appearance - Part 1: Softwood | |
| DANSK DS/EN 13017-2 | EN-Solid wood panels - Classification by surface appearance - Part 2: Hardwood | |
| DANSK DS/EN 13085 | EN-Wallcoverings - Specification for cork rolls | |
| DANSK DS/EN 1309-1 | EN-Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber | |
| DANSK DS/EN 1309-2 | EN-Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules | |
| DANSK DS/EN 1310 | EN-Round and sawn timber - Method of measurement of features | |
| DANSK DS/EN 1311 | EN-Round and sawn timber - Method of measurement of biological degrade | |
| DANSK DS/EN 1312 | EN-Round and sawn timber - Determination of the batch volume of sawn timber | |
| DANSK DS/EN 1313-1 | EN-Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber | |
| DANSK DS/EN 1313-2 | EN-Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber | |
| DANSK DS/EN 1313-2/AC | EN-Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber |
1 2 3 4 > >