Print Page Email Page Smaller Text Larger Text

DS - Rubber and Plastic Industries Collection

This collection contains documents from the following standards organization(s): Dansk Standard

Most Popular Standards from the DS - Rubber and Plastic Industries Collection

DANSK DS/EN 205 EN-Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints 
DANSK DS/EN 13900-5 EN-Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test 
DANSK DS 812 EN-Plastic mouldings. Tolerances and acceptance conditions of dimensions 
DANSK DS/EN 549 EN-Rubber materials for seals and diaphragms for gas appliances and gas equipment 
DANSK DS/EN 1555-2 EN-Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes 
DANSK DS/EN ISO 14126 EN-Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999) 
DANSK DS/EN 13655 EN-Plastics - Mulching thermoplastic films for use in agriculture and horticulture 
DANSK DS/EN 681-2/A2 EN-Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers 
DANSK DS/EN 438-2 EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties 
DANSK DS/EN 681-1/A3 EN-Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber 
DANSK DS/EN 1122 EN-Plastics - Determination of cadmium - Wet decomposition method 
DANSK DS/EN ISO 1043-2 EN-Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials 
DANSK DS/EN 13706-2 EN-Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements 
DANSK DS/EN 438-7 EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes 
DANSK DS/EN 438-6 EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greate 
DANSK DS/EN ISO 12058-1/AC EN-Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method 
DANSK DS/EN ISO 846 EN-Plastics - Evaluation of the action of microorganisms 
DANSK DS/EN 1761 EN-Rubber hoses and hose assemblies for fuel truck delivery - Specification 
DANSK DS/EN 1114-1 EN-Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders 
DANSK DS/EN ISO 15540 EN-Ships and marine technology - Fire resistance of hose assemblies - Test methods 
DANSK DS/EN ISO 13468-1 EN-Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument 
DANSK DS/EN 438-1 EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information 
DANSK DS/EN ISO 1172 EN-Textile-glass-reinforced plastics - Prepregs moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods 
DANSK DS/EN 1360 EN-Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification 
DANSK DS/EN 1372 EN-Adhesives - Test method for adhesives for floor and wall coverings - Peel test 
DANSK DS/EN ISO 1043-4 EN-Plastics - Symbols and abbreviated terms - Part 4: Flame retardants 
DANSK DS/EN 682/A1 EN-Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids 
DANSK DS/EN 438-4 EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater 
DANSK DS/EN 13206 EN-Covering thermoplastic films for use in agriculture and horticulture 
DANSK DS/EN ISO 11469 EN-Plastics - Generic identification and marking of plastics products 
DANSK DS/CEN/TS 1555-7 EN-Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity 
DANSK DS/EN 1246 EN-Adhesives - Determination of ash and sulphated ash. 
DANSK DS/EN 12765 EN-Classification of thermosetting wood adhesives for non-structural applications 
DANSK DS/EN 1240 EN-Adhesives - Determination of hydroxyl value and/or hydroxyl content. 
DANSK DS/EN ISO 1110 EN-Plastics - Polyamides - Accelerated conditioning of test specimens 
DANSK DS/EN 1555-4 EN-Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves 
DANSK DS/EN 13887 EN-Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding 
DANSK DS/EN ISO 14125 EN-Fibre-reinforced plastic composites - Determination of flexural properties 
DANSK DS/EN 14713 EN-Adhesives for paper and board packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding 
DANSK DS/EN 59 EN-Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor 
DANSK DS/EN ISO 11963 EN-Plastics - Polycarbonate sheets - Types dimensions and characteristics 
DANSK DS 2131.2 EN-Pipes fittings and joints of polyethylene type PEM and PEH for buried gas pipe lines 
DANSK DS/EN 1327 EN-Gas welding equipment - Thermoplastic hoses for welding and allied processes 
DANSK DS/EN ISO 11501 EN-Plastics - Film and sheeting - Determination of dimensional change on heating 
DANSK DS/EN 1243 EN-Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates 
DANSK DS/EN 14410 EN-Self adhesive tapes - Measurement of breaking strength and elongation at break 
DANSK DS/EN ISO 1401 EN-Rubber hoses for agricultural spraying 
DANSK DS/EN ISO 14130 EN-Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method 
DANSK DS/EN 1013-2 EN-Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) 
DANSK DS/EN 857 EN-Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification