DS - Metallurgy Collection
This collection contains documents from the following standards organization(s): Dansk Standard
| DANSK DS/EN 1559-2 | EN-Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings | |
| DANSK DS/EN 1559-3 | EN-Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings | |
| DANSK DS/EN 1559-4 | EN-Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings | |
| DANSK DS/EN 1559-5 | EN-Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings | |
| DANSK DS/EN 1559-6 | EN-Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings | |
| DANSK DS/EN 1560 | EN-Founding - Designation system for cast irons - Material symbols and material numbers | |
| DANSK DS/EN 1561 | EN-Founding - Grey cast irons | |
| DANSK DS/EN 1562 | EN-Founding - Malleable cast irons | |
| DANSK DS/EN 1562/A1 | EN-Founding - Malleable cast irons | |
| DANSK DS/EN 15622 | EN-Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) | |
| DANSK DS/EN 1563+A1 | EN-Founding - Spheroidal graphite cast irons | |
| DANSK DS/EN 1563/A2 | EN-Founding - Spheroidal graphite cast irons | |
| DANSK DS/EN 1564 | EN-Founding - Austempered ductile cast irons | |
| DANSK DS/EN 1564/A1 | EN-Founding - Austempered ductile cast irons | |
| DANSK DS/EN 15655 | EN-Ductile iron pipes fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods | |
| DANSK DS/EN 15690-2 | EN-Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) | |
| DANSK DS/EN 1592-1 | EN-Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery | |
| DANSK DS/EN 1592-2 | EN-Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties | |
| DANSK DS/EN 1592-3 | EN-Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes | |
| DANSK DS/EN 1592-4 | EN-Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square rectangular and shaped tubes | |
| DANSK DS/EN 1652 | EN-Copper and copper alloys - Plate sheet strip and circles for general purposes | |
| DANSK DS/EN 1652/AC | EN-Copper and copper alloys - Plate sheet strip and circles for general purposes | |
| DANSK DS/EN 1653 | EN-Copper and copper alloys - Plate sheet and circles for boilers pressure vessels and hot water storage units | |
| DANSK DS/EN 1653/A1 | EN-Copper and copper alloys - Plate sheet and circles for boilers pressure vessels and hot water storage units | |
| DANSK DS/EN 1654 | EN-Copper and copper alloys - Strip for springs and connectors | |
| DANSK DS/EN 1654/AC | EN-Copper and copper alloys - Strip for springs and connectors | |
| DANSK DS/EN 1655 | EN-Copper and copper alloys - Declarations of conformity | |
| DANSK DS/EN 1669 | EN-Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip | |
| DANSK DS/EN 1676 | EN-Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications | |
| DANSK DS/EN 1706 | EN-Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties | |
| DANSK DS/EN 1715-1 | EN-Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery | |
| DANSK DS/EN 1715-2 | EN-Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications | |
| DANSK DS/EN 1715-3 | EN-Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) | |
| DANSK DS/EN 1715-4 | EN-Aluminium and aluminium alloys - -Drawing stock - Part 4: Specific requirements for welding applications | |
| DANSK DS/EN 1753 | EN-Magnesium and magnesium alloys - Magnesium alloy ingots and castings | |
| DANSK DS/EN 1754 | EN-Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes ingots and castings - Designation system | |
| DANSK DS/EN 1758 | EN-Copper and copper alloys - Strip for lead frames | |
| DANSK DS/EN 1774 | EN-Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid | |
| DANSK DS/EN 1780-1 | EN-Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting master alloys and castings - Part 1: Numerical designation system | |
| DANSK DS/EN 1780-2 | EN-Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting master alloys and castings - Part 2: Chemical symbol based designation system | |
| DANSK DS/EN 1780-3 | EN-Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting master alloys and castings - Part 3: Writing rules for chemical composition | |
| DANSK DS/EN 1965-1 | EN-Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate | |
| DANSK DS/EN 1965-2 | EN-Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate | |
| DANSK DS/EN 1976 | EN-Copper and copper alloys - Cast unwrought copper products | |
| DANSK DS/EN 1977 | EN-Copper and copper alloys - Copper drawing stock (wire rod) | |
| DANSK DS/EN 1978 | EN-Copper and copper alloys - Copper cathodes | |
| DANSK DS/EN 1981 | EN-Copper and copper alloys - Master alloys | |
| DANSK DS/EN 1982 | EN-Copper and copper alloys - Ingots and castings | |
| DANSK DS/EN 23312 | EN-Sintered metal materials and hardmetals - Determination of Young modulus | |
| DANSK DS/EN 23326 | EN-Hardmetals - Determination of (the magnetization) coercivity | |
| DANSK DS/EN 23878 | EN-Hardmetals - Vickers hardness test | |
| DANSK DS/EN 23909 | EN-Hardmetals - Determination of cobalt - Potentiometric method | |
| DANSK DS/EN 23923-2 | EN-Metallic powders - Determination of apparent density - Part 2: Scott volumeter method | |
| DANSK DS/EN 23995 | EN-Metallic powders - Determination of green strength by transverse rupture of rectangular compacts | |
| DANSK DS/EN 24003 | EN-Permeable sintered metal materials - Determination of bubble test pore size | |
| DANSK DS/EN 24159 | EN-Ferromanganese and ferrosilicomanganese - Determination of manganese content - Potentiometric method | |
| DANSK DS/EN 24489 | EN-Sintered hardmetals - Sampling and testing | |
| DANSK DS/EN 24491-1 | EN-Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines | |
| DANSK DS/EN 24491-4 | EN-Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction | |
| DANSK DS/EN 24492 | EN-Metallic powders excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering | |
| DANSK DS/EN 24496 | EN-Metallic powders - Determination of acid-insoluble content in iron copper tin and bronze powders | |
| DANSK DS/EN 24497 | EN-Metallic powders - Determination of particle size by dry sieving | |
| DANSK DS/EN 24501 | EN-Hardmetals - Determination of titanium - Photometric peroxide method | |
| DANSK DS/EN 24503 | EN-Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method | |
| DANSK DS/EN 24505 | EN-Hardmetals - Metallographic determination of porosity and uncombined carbon | |
| DANSK DS/EN 24506 | EN-Hardmetals - Compression test | |
| DANSK DS/EN 24829-1 | EN-Steel and cast iron - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0 5 and 1 | |
| DANSK DS/EN 24829-2 | EN-Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 2: Silicon contents between 0 1 og 0 5 % | |
| DANSK DS/EN 24883 | EN-Hardmetals - Determination of contents of metallic elements by x-ray fluorescence - Solution method | |
| DANSK DS/EN 24884 | EN-Hardmetals - Sampling and testing of powders using sintered test pieces | |
| DANSK DS/EN 24935 | EN-Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace | |
| DANSK DS/EN 24937 | EN-Steel and iron - Determination of chromium content - Potentiometric or visual titration method | |
| DANSK DS/EN 24938 | EN-Steel and iron - Determination of nickel content - Gravimetric or titrimetric method | |
| DANSK DS/EN 24943 | EN-Steel and cast iron - Determination of copper content - Flame atomic absorption spectrometric method | |
| DANSK DS/EN 24946 | EN-Steel and cast iron - Determination of copper content - 22'-Diquinolyl spectrophotometric method | |
| DANSK DS/EN 24947 | EN-Steel and cast iron - Determination of vanadium content - Potentiometric titration method (ISO 4947:1986) | |
| DANSK DS/EN 25754 | EN-Sintered metal materials excluding hardmetals - Unnotched impact test piece | |
| DANSK DS/EN 26352 | EN-Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric method | |
| DANSK DS/EN 26501 | EN-Ferronickel - Specifications and delivery requirements |