DS - Metallurgy Collection
This collection contains documents from the following standards organization(s):
Dansk Standard
Most Popular Standards from the DS - Metallurgy Collection
| DANSK DS/EN 602 | EN-Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff | |
| DANSK DS/EN 12680-3 | EN-Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings | |
| DANSK DS/EN 50162 | EN-Protection against corrosion by stray current from direct current systems | |
| DANSK DS/EN 10308 | EN-Non destructive testing - Ultrasonic testing of steel bars | |
| DANSK DS/EN 10222-2+AC | EN-Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties | |
| DANSK DS/EN 10016-2 | EN-Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod | |
| DANSK DS/EN 12681 | EN-Founding - Radiographic inspection | |
| DANSK DS/EN 10132-3 | EN-Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering | |
| DANSK DS/EN 13603 | EN-Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes | |
| DANSK DS/EN 10025-1 | EN-Hot rolled products of structural steels - Part 1: General technical delivery conditions | |
| DANSK DS/EN 10131 | EN-Cold rolled uncoated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape | |
| DANSK DS/EN 10034 | EN-Structural steel I and H sections. Tolerances on shape and dimensions | |
| DANSK DS/EN 10246-3 | EN-Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections | |
| DANSK DS/EN 10279 | EN-Hot rolled steel channels - Tolerances on shape dimensions and mass | |
| DANSK DS/EN 10139 | EN-Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions | |
| DANSK DS/EN 10224 | EN-Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions | |
| DANSK DS/EN 10307 | EN-Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) | |
| DANSK DS/EN 10221 | EN-Surface quality classes for hot-rolled bars and rods - Technical delivery conditions | |
| DANSK DS/EN 10265 | EN-Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability | |
| DANSK DS/EN 10168 | EN-Steel products - Inspection documents - List of information and description | |
| DANSK DS/EN 10223-3 | EN-Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes | |
| DANSK DS/EN 12258-1 | EN-Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms | |
| DANSK DS/EN 12060 | EN-Zinc and zinc alloys - Method of sampling - Specifications | |
| DANSK DS/EN 12501-2 | EN-Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials | |
| DANSK DS/EN ISO 14577-2 | EN-Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines | |
| DANSK DS/EN 10263-3 | EN-Steel rod bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels | |
| DANSK DS/EN 601 | EN-Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food | |
| DANSK DS/EN 10027-1 | EN-Designation systems for steel - Part 1: Steel names principal symbols | |
| DANSK DS/EN 10278 | EN-Dimensions and tolerances of bright steel products | |
| DANSK DS/EN 10140 | EN-Cold rolled narrow steel strip - Tolerances on dimensions and shape | |
| DANSK DS/EN 10202 | EN-Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel | |
| DANSK DS/EN 10051+A1 | EN-Continuously hot-rolled uncoated plate sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape | |
| DANSK DS/EN 10270-3 | EN-Steel wire for mechanical springs - Part 3: Stainless spring steel wire | |
| DANSK DS/EN 10294-1 | EN-Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels | |
| DANSK DS/EN 10243-1/AC | EN-Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings | |
| DANSK DS/EN 10029 | EN-Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions shape and mass | |
| DANSK DS/EN 10264-2 | EN-Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications | |
| DANSK DS/EN 10016-1 | EN-Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements | |
| DANSK DS/EN 10060 | EN-Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| DANSK DS/EN 10269 | EN-Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties | |
| DANSK DS/EN 10058 | EN-Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions | |
| DANSK DS/EN 10263-2 | EN-Steel rod bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working | |
| DANSK DS/EN 10067 | EN-Hot rolled bulb flats - Dimensions and tolerances on shape dimensions and mass | |
| DANSK DS/EN 10016-4 | EN-Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications | |
| DANSK DS/EN 10246-2 | EN-Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-t | |
| DANSK DS/EN 12680-2 | EN-Founding - Ultrasonic examination - Part 2 : Steel castings for highly stressed components | |
| DANSK DS/EN 10248-1 | EN-Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions | |
| DANSK DS/EN 10107 | EN-Grain-oriented electrical steel sheet and strip delivered in the fully processed state | |
| DANSK DS/EN 1370 | EN-Founding - Surface roughness inspection by visual tactile comparators | |
| DANSK DS/EN 10297-1 | EN-Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
View Alphabetical Listing of Documents
- Documents: DANSK DS-h+ to DANSK DS/EN 10079
- Documents: DANSK DS/EN 10083-1 to DANSK DS/EN 10222-4+A1
- Documents: DANSK DS/EN 10223-1 to DANSK DS/EN 10269/A1
- Documents: DANSK DS/EN 10270-1 to DANSK DS/EN 12258-2
- Documents: DANSK DS/EN 12258-4 to DANSK DS/EN 13600
- Documents: DANSK DS/EN 13602 to DANSK DS/EN 15542
- Documents: DANSK DS/EN 1559-2 to DANSK DS/EN 26501
- Documents: DANSK DS/EN 27526 to DANSK DS/EN 755-9
- Documents: DANSK DS/EN 845-3 + A1/ZA to DANSK DS/EN ISO 3738-2
- Documents: DANSK DS/EN ISO 377 to DANSK DS/EN ISO 945-1/AC