DS - Mechanical Systems and Components for General Use Collection
This collection contains documents from the following standards organization(s): Dansk Standard < < 1 2 3 4 5 > >
| DANSK DS/EN ISO 7046-2 | EN-Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8 stainless steel and non-ferrous metals | |
| DANSK DS/EN ISO 7047 | EN-Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A | |
| DANSK DS/EN ISO 7048 | EN-Cross recessed cheese head screws | |
| DANSK DS/EN ISO 7049 | EN-Cross recessed pan head tapping screws | |
| DANSK DS/EN ISO 7050 | EN-Cross recessed countersunk (flat) head tapping screws (common head style) | |
| DANSK DS/EN ISO 7051 | EN-Cross recessed raised countersunk (oval) head tapping screws | |
| DANSK DS/EN ISO 7089 | EN-Plain washers - Normal series - Product grade A | |
| DANSK DS/EN ISO 7090 | EN-Plain washers chamfered - Normal series - Product grade A | |
| DANSK DS/EN ISO 7091 | EN-Plain washers - Normal series - Product grade C | |
| DANSK DS/EN ISO 7092 | EN-Plain washers - Small series - Product grade A | |
| DANSK DS/EN ISO 7093-1 | EN-Plain washers - Large series - Part 1: Product grade A | |
| DANSK DS/EN ISO 7093-2 | EN-Plain washers - Large series - Part 2: Product grade C | |
| DANSK DS/EN ISO 7094 | EN-Plain washers - Extra large series - Product grade C | |
| DANSK DS/EN ISO 7094/AC | EN-Plain washers - Extra large series - Product grade C | |
| DANSK DS/EN ISO 7380 | EN-Hexagon socket button head screws | |
| DANSK DS/EN ISO 7719 | EN-Prevailing torque type all-metal hexagon nuts style 1 - Property classes 5 8 and 10 | |
| DANSK DS/EN ISO 7721-2 | EN-Countersunk flat head screws - Part 2: Penetration depth of cross recesses | |
| DANSK DS/EN ISO 8673 | EN-Hexagon nuts style 1 with metric fine pitch thread - Product grades A and B | |
| DANSK DS/EN ISO 8674 | EN-Hexagon nuts style 2 with metric fine pitch thread - Product grades A and B | |
| DANSK DS/EN ISO 8675 | EN-Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B | |
| DANSK DS/EN ISO 8676 | EN-Hexagon head screws with metric fine pitch thread - Product grades A and B | |
| DANSK DS/EN ISO 8733 | EN-Parallel pins with internal thread of unhardened steel and austenitic stainless steel | |
| DANSK DS/EN ISO 8734 | EN-Parallel pins of hardened steel and martensitic stainless steel (Dowel pins) | |
| DANSK DS/EN ISO 8735 | EN-Parallel pins with internal thread of hardened steel or martensitic stainless steel | |
| DANSK DS/EN ISO 8739 | EN-Grooved pins - Full-length parallel grooved with pilot | |
| DANSK DS/EN ISO 8740 | EN-Grooved pins - Full-length parallel grooved with chamfer | |
| DANSK DS/EN ISO 8741 | EN-Grooved pins - Half-length reverse-taper grooved | |
| DANSK DS/EN ISO 8742 | EN-Grooved pins - One-third-length centre grooved | |
| DANSK DS/EN ISO 8743 | EN-Grooved pins - Half-length centre grooved | |
| DANSK DS/EN ISO 8744 | EN-Grooved pins - Full-length taper grooved | |
| DANSK DS/EN ISO 8745 | EN-Grooved pins - Half-length taper grooved | |
| DANSK DS/EN ISO 8746 | EN-Grooved pins with round head | |
| DANSK DS/EN ISO 8747 | EN-Grooved pins with countersunk head | |
| DANSK DS/EN ISO 8748 | EN-Spring-type straight pins - Coiled heavy duty | |
| DANSK DS/EN ISO 8750 | EN-Spring-type straight pins - Coiled standard duty | |
| DANSK DS/EN ISO 8751 | EN-Spring-type straight pins - Coiled light duty | |
| DANSK DS/EN ISO 8752 | EN-Spring-type straight pins - Slotted heavy duty | |
| DANSK DS/EN ISO 8765 | EN-Hexagon head bolts with metric fine pitch thread - Product grades A and B | |
| DANSK DS/EN ISO 8826-1 | EN-Technical drawings - Rolling bearings - Part 1: General simplified representation | |
| DANSK DS/EN ISO 8826-2 | EN-Technical drawings - Rolling bearings - Part 2: Detailed simplified representation | |
| DANSK DS/EN ISO 887 | EN-Plain washers for metric bolts screws and nuts for general purposes - General plan | |
| DANSK DS/EN ISO 887/AC | EN-Plain washers for metric bolts screws and nuts for general purposes - General plan | |
| DANSK DS/EN ISO 898-1 | EN-Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts screws and studs with specified property classes - Coarse thread and fine pitch thread | |
| DANSK DS/EN ISO 898-5 | EN-Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses | |
| DANSK DS/EN ISO 898-6 | EN-Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread | |
| DANSK DS/EN ISO 9222-2 | EN-Technical drawings - Seals of dynamic application - Part 2: Detailed simplified representation | |
| DANSK DS/IEC/PAS 62508 | EN-Guidance on human factors engineering for system life cycle applications | |
| DANSK DS/INF 142 | EN-Risk management - FMEA (Failure Mode and Effect Analysis) practical application | |
| DANSK DS/INF 57 | EN-Geometrical Product Specifications (GPS) - Guidance in use | |
| DANSK DS/ISO 1051 | EN-Rivet shank diameters | |
| DANSK DS/ISO 14 | EN-Straight-sided splines for cylindrical shafts with internal centering - Dimensions tolerances and verification | |
| DANSK DS/ISO 14728-1 | EN-Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life | |
| DANSK DS/ISO 14728-2 | EN-Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings | |
| DANSK DS/ISO 1501 | EN-ISO miniature screw threads | |
| DANSK DS/ISO 1502 | EN-ISO general-purpose metric screw threads - Gauges and gauging | |
| DANSK DS/ISO 15312 | EN-Rolling bearings - Thermal speed rating - Calculation and coefficients | |
| DANSK DS/ISO 1891 | EN-Fasteners - Terminology | |
| DANSK DS/ISO 1940-1 | EN-Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances | |
| DANSK DS/ISO 1940-1/Corr. 1 | EN-Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances | |
| DANSK DS/ISO 1940-2 | EN-Mechanical vibration - Balance quality requirements of rigid rotors - Part 2: Balance errors | |
| DANSK DS/ISO 225 | EN-Fasteners - Bolts screws studs and nuts - Symbols and designation of dimensions | |
| DANSK DS/ISO 2339 | EN-Taper pins - Unhardened | |
| DANSK DS/ISO 2340 | EN-Clevis pins without head | |
| DANSK DS/ISO 2341 | EN-Clevis pins with head | |
| DANSK DS/ISO 261 | EN-ISO general purpose metric screw threads - General plan | |
| DANSK DS/ISO 262 | EN-ISO general purpose metric screw threads - Selected sizes for screws bolts and nuts | |
| DANSK DS/ISO 263 | EN-ISO inch screw threads - General plan selection for screws bolts and nuts - Diameter range 0.06 to 6 in | |
| DANSK DS/ISO 272 | EN-Fasteners - Hexagon products - Width across flats | |
| DANSK DS/ISO 273 | EN-Fasteners - Clearance holes for bolts and screws | |
| DANSK DS/ISO 281 | EN-Rolling bearings - Dynamic load ratings and rating life | |
| DANSK DS/ISO 2901 | EN-ISO metric trapezoidal screw threads - Basic profile and maximum material profiles | |
| DANSK DS/ISO 2902 | EN-ISO metric trapezoidal screw threads - General plan | |
| DANSK DS/ISO 2903 | EN-ISO metric trapezoidal screw threads - Tolerances | |
| DANSK DS/ISO 2904 | EN-ISO metric trapezoidal screw threads - Basic dimensions | |
| DANSK DS/ISO 3508 | EN-Thread run-outs - Metric screw threads | |
| DANSK DS/ISO 355 | EN-Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations | |
| DANSK DS/ISO 4015 | EN-Hexagon head bolts - Product grade B - Reduced shank (shank diameter = pitch diamter) | |
| DANSK DS/ISO 4755 | EN-Fasteners - Thread undercuts for external metric ISO thread | |
| DANSK DS/ISO 4766 | EN-Slotted set screws with flat point |
< < 1 2 3 4 5 > >