DS - Mechanical Systems and Components for General Use Collection
This collection contains documents from the following standards organization(s): Dansk Standard < < 1 2 3 4 5 > >
| DANSK DS/EN ISO 15065 | EN-Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 | |
| DANSK DS/EN ISO 15330 | EN-Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method | |
| DANSK DS/EN ISO 15480 | EN-Hexagon washer head drilling screws with tapping screw thread | |
| DANSK DS/EN ISO 15481 | EN-Cross recessed pan head drilling screws with tapping screw thread | |
| DANSK DS/EN ISO 15482 | EN-Cross recessed countersunk head drilling screws with tapping screw thread | |
| DANSK DS/EN ISO 15483 | EN-Cross recessed raised countersunk head drilling screws with tapping screw thread | |
| DANSK DS/EN ISO 1580 | EN-Slotted pan head screws - Product grade A | |
| DANSK DS/EN ISO 15973 | EN-Closed end blind rivets with break pull mandrel and protruding head - AIA/St | |
| DANSK DS/EN ISO 15974 | EN-Closed end blind rivets with break pull mandrel and countersunk head - AIA/St | |
| DANSK DS/EN ISO 15975 | EN-Closed end blind rivets with break pull mandrel and protruding head - AI/AIA | |
| DANSK DS/EN ISO 15976 | EN-Closed end blind rivets with break pull mandrel and protruding head - St/St | |
| DANSK DS/EN ISO 15977 | EN-Open end blind rivets with break pull mandrel and protruding head - AIA/St | |
| DANSK DS/EN ISO 15978 | EN-Open end blind rivets with break pull mandrel and countersunk head - AIA/St | |
| DANSK DS/EN ISO 15979 | EN-Open end blind rivets with break pull mandrel and protruding head - St/St | |
| DANSK DS/EN ISO 15980 | EN-Open end blind rivets with break pull mandrel and countersunk head - St/St | |
| DANSK DS/EN ISO 15981 | EN-Open end blind rivets with break pull mandrel and protruding head - AIA/AIA | |
| DANSK DS/EN ISO 15982 | EN-Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA | |
| DANSK DS/EN ISO 15983 | EN-Open end blind rivets with break pull mandrel and protruding head - A2/A2 | |
| DANSK DS/EN ISO 15984 | EN-Open end blind rivets with break pull mandrel and countersunk head - A2/A2 | |
| DANSK DS/EN ISO 16047 | EN-Fasteners - Torque/clamp force testing | |
| DANSK DS/EN ISO 16048 | EN-Passivation of corrosion-resistant stainless-steel fasteners | |
| DANSK DS/EN ISO 16426 | EN-Fasteners - Quality assurance system | |
| DANSK DS/EN ISO 16582 | EN-Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt | |
| DANSK DS/EN ISO 16583 | EN-Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt | |
| DANSK DS/EN ISO 16584 | EN-Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt | |
| DANSK DS/EN ISO 16585 | EN-Closed end blind rivets with pull mandrel and protruding head - A2/SSt | |
| DANSK DS/EN ISO 2009 | EN-Slotted countersunk flat head screws (common head style) - Product grade A | |
| DANSK DS/EN ISO 2010 | EN-Slotted raised countersunk head screws (common head style) - Product grade A | |
| DANSK DS/EN ISO 2162-1 | EN-Technical product documentation - Springs - Part 1: Simplified representation | |
| DANSK DS/EN ISO 2162-2 | EN-Technical product documentation - Springs - Part 2: Data sheets for cylindrical helical compression springs | |
| DANSK DS/EN ISO 21670 | EN-Hexagon weld nuts with flange | |
| DANSK DS/EN ISO 2203 | EN-Technical drawings - Conventional representation of gears | |
| DANSK DS/EN ISO 228-1 | EN-Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions tolerances and designation | |
| DANSK DS/EN ISO 228-2 | EN-Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges | |
| DANSK DS/EN ISO 2320 | EN-Prevailing torque type steel nuts - Mechanical and performance properties | |
| DANSK DS/EN ISO 2338 | EN-Parallel pins of unhardened steel and austenitic stainless steel | |
| DANSK DS/EN ISO 2342 | EN-Slotted headless screws with shank | |
| DANSK DS/EN ISO 23429 | EN-Gauging of hexagon sockets | |
| DANSK DS/EN ISO 26909 | EN-Springs - Vocabulary | |
| DANSK DS/EN ISO 2702 | EN-Heat-treated steel tapping screws - Mechanical properties | |
| DANSK DS/EN ISO 3269 | EN-Fasteners - Acceptance inspection | |
| DANSK DS/EN ISO 3506-1 | EN-Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts screws and studs | |
| DANSK DS/EN ISO 3506-2 | EN-Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts | |
| DANSK DS/EN ISO 3506-3 | EN-Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress | |
| DANSK DS/EN ISO 3506-4 | EN-Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws | |
| DANSK DS/EN ISO 3952-1 | EN-Kinematic diagrams - Graphical symbols - Part 1 | |
| DANSK DS/EN ISO 3952-1/A1 | EN-Kinematic diagrams - Graphical symbols - Part 1: Amendment 1 | |
| DANSK DS/EN ISO 3952-2 | EN-Kinematic diagrams - Graphical symbols - Part 2 | |
| DANSK DS/EN ISO 3952-3 | EN-Kinematic diagrams - Graphical symbols - Part 3 | |
| DANSK DS/EN ISO 3952-4 | EN-Kinematic diagrams - Graphical symbols - Part 4 | |
| DANSK DS/EN ISO 4014 | EN-Hexagon head bolts - Product grades A and B | |
| DANSK DS/EN ISO 4016 | EN-Hexagon head bolts - Product grade C | |
| DANSK DS/EN ISO 4017 | EN-Hexagon head screws - Product grades A and B | |
| DANSK DS/EN ISO 4018 | EN-Hexagon head screws - Product grade C | |
| DANSK DS/EN ISO 4026 | EN-Hexagon socket set screws with flat point | |
| DANSK DS/EN ISO 4027 | EN-Hexagon socket set screws with cone point | |
| DANSK DS/EN ISO 4028 | EN-Hexagon socket set screws with dog point | |
| DANSK DS/EN ISO 4029 | EN-Hexagon socket set screws with cup point | |
| DANSK DS/EN ISO 4032 | EN-Hexagon nuts style 1 - Product grades A and B | |
| DANSK DS/EN ISO 4033 | EN-Hexagon nuts style 2 - Product grades A and B | |
| DANSK DS/EN ISO 4034 | EN-Hexagon nuts - Product grade C | |
| DANSK DS/EN ISO 4035 | EN-Hexagon thin nuts (chamfered) - Product grades A and B | |
| DANSK DS/EN ISO 4036 | EN-Hexagon thin nuts (unchamfered) - Product grade B | |
| DANSK DS/EN ISO 4042 | EN-Fasteners - Electroplated coatings | |
| DANSK DS/EN ISO 4753 | EN-Fasteners - Ends of parts with external ISO metric screw thread | |
| DANSK DS/EN ISO 4757 | EN-Cross recesses for screws | |
| DANSK DS/EN ISO 4759-1 | EN-Tolerances for fasteners - Part 1: Bolts screws studs and nuts - Product grade A B and C | |
| DANSK DS/EN ISO 4759-3 | EN-Tolerances for fasteners - Part 3: Plain washers for bolts screws and nuts - Product grades A and C | |
| DANSK DS/EN ISO 4762 | EN-Hexagon socket head cap screws | |
| DANSK DS/EN ISO 4871 | EN-Acoustics - Declaration and verification of noise emission values of machinery and equipment | |
| DANSK DS/EN ISO 5845-1 | EN-Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles | |
| DANSK DS/EN ISO 6157-2 | EN-Fasteners - Surface discontinuities - Part 2: Nuts | |
| DANSK DS/EN ISO 6410-1 | EN-Technical drawings - Screw threads and threaded parts - Part 1: General conventions | |
| DANSK DS/EN ISO 6410-2 | EN-Technical drawings - Screw threads and threaded parts - Part 2: Screw threads inserts | |
| DANSK DS/EN ISO 6410-3 | EN-Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation | |
| DANSK DS/EN ISO 6413 | EN-Technical drawings - Representation of splines and serrations | |
| DANSK DS/EN ISO 7040 | EN-Prevailing torque type hexagon nuts (with non-metallic insert) style 1 - Property classes 5 8 and 10 | |
| DANSK DS/EN ISO 7042 | EN-Prevailing torque type all-metal hexagon nuts - Property classes 5 8 10 and 12 | |
| DANSK DS/EN ISO 7045 | EN-Pan head screws with type H or type Z cross recess - Product grade A |
< < 1 2 3 4 5 > >