DS - Mechanical Systems and Components for General Use Collection
This collection contains documents from the following standards organization(s): Dansk Standard 1 2 3 4 5 > >
| DANSK DS 113.2 | EN-Lifting eye bolts | |
| DANSK DS 133 | EN-Shaft heights - Driving and driven machines | |
| DANSK DS 2016.4 | EN-Hexagon nuts - B.S.W. thread - Finished | |
| DANSK DS 2016.5 | EN-Hexagon nuts - B.S.W. thread - Black | |
| DANSK DS 2017.3 | EN-Slotted nuts - ISO inch screw thread - Finished | |
| DANSK DS 2017.4 | EN-Castle nuts - ISO inch screw thread - Finished | |
| DANSK DS 2017.5 | EN-Slotted and castle nuts - B.S.W. thread - Finished | |
| DANSK DS 2017.6 | EN-Slotted nuts - B.S.W. thread - Black | |
| DANSK DS 2074.5 | EN-Hexagon bolts - Whitworth thread - Black | |
| DANSK DS 2074.6 | EN-Hexagon head screws - Whitworth thread - Black | |
| DANSK DS 2410 | EN-Method for determining energy efficiency for gear units | |
| DANSK DS 2410 Engelsk | EN-Method for determining the energy efficiency of gear units | |
| DANSK DS 4 | EN-Whitworth screw threads 1/4...6 inches | |
| DANSK DS 42 | EN-Whitworth fine screw threads 7/32...3 inches | |
| DANSK DS 44 | EN-Internal thread runout and undercut - ISO metric thread | |
| DANSK DS 56 | EN-Technical drawings - Representation of screws and nuts | |
| DANSK DS 680 | EN-ISO metric coarse threads from 1 to 68 mm diameter - Limits | |
| DANSK DS 681 | EN-ISO metric fine threads from 1 to 245 mm diameter - Limits | |
| DANSK DS 682 | EN-ISO metric fine threads from 25 to 52 mm diameter - Limits | |
| DANSK DS 683 | EN-ISO metric fine threads from 53 to 110 mm diameter - Limits | |
| DANSK DS 684 | EN-ISO metric fine threads from 112 to 180 mm diameter - Limits | |
| DANSK DS 685 | EN-Steel conduit thread - Sizes | |
| DANSK DS 686 | EN-Knuckle thread - Profiles basic sizes general plan | |
| DANSK DS 687 | EN-Knuckle thread - Deviations and tolerances | |
| DANSK DS 813 | EN-Interference joints - Calculation and design rules | |
| DANSK DS 94 | EN-Tangential keys and keyways for unidirectional torque - Shaft diameter and corresponding keyway section | |
| DANSK DS 95 | EN-Tangential keys and keyways for bidirectional torque - Shaft diameter and corresponding keyway section | |
| DANSK DS 96 | EN-Parallel keys - Application and dimensions | |
| DANSK DS 98 | EN-Parallel keys - Holes for hold down and lifting screws | |
| DANSK DS 99 | EN-Woodruff keys - Shaft diameters dimensions of corresponding Woodruff keys and keyway depth in shaft and hub | |
| DANSK DS-h+ | EN-Geometrical product specifications (GPS) - Part 6: Complementary GPS standards - Processspecific tolerance standards and machine element geometry standards | |
| DANSK DS/CWA 15740 | EN-Risk-Based Inspection and Maintenance Procedures for European Industry (RIMAP) | |
| DANSK DS/EN 10226-1 | EN-Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions tolerances and designation | |
| DANSK DS/EN 10226-2 | EN-Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions tolerances and designation | |
| DANSK DS/EN 10226-3 | EN-Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges | |
| DANSK DS/EN 10230-1 | EN-Steel wire nails - Part 1: Loose nails for general appliances | |
| DANSK DS/EN 13271 | EN-Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints | |
| DANSK DS/EN 13271/AC | EN-Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints | |
| DANSK DS/EN 13460 | EN-Maintenance - Documentation for maintenance | |
| DANSK DS/EN 13906-1 | EN-Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs | |
| DANSK DS/EN 13906-2 | EN-Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs | |
| DANSK DS/EN 13906-3 | EN-Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs | |
| DANSK DS/EN 14218 | EN-Hexagon nuts with flange - Fine pitch thread | |
| DANSK DS/EN 14219 | EN-Hexagon bolts with flange with metric fine pitch thread - Small series | |
| DANSK DS/EN 14219/AC | EN-Hexagon bolts with flange with metric fine pitch thread - Small series | |
| DANSK DS/EN 14399-1 | EN-High-strength structural bolting assemblies for preloading - Part 1: General requirements | |
| DANSK DS/EN 14399-10 | EN-High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload | |
| DANSK DS/EN 14399-2 | EN-High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading | |
| DANSK DS/EN 14399-3 | EN-High-strenght structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies | |
| DANSK DS/EN 14399-4 | EN-High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies | |
| DANSK DS/EN 14399-5 | EN-High-strength structural bolting assemblies for preloading - Part 5: Plain washers | |
| DANSK DS/EN 14399-5/AC | EN-High-strength structural bolting assemblies for preloading - Part 5: Plain washers | |
| DANSK DS/EN 14399-6 | EN-High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers | |
| DANSK DS/EN 14399-6/AC | EN-High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers | |
| DANSK DS/EN 14399-7 | EN-High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies | |
| DANSK DS/EN 14399-8 | EN-High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies | |
| DANSK DS/EN 14399-9 | EN-High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | |
| DANSK DS/EN 14831 | EN-Fasteners - Tightening performance - Torque/Angle simplified test method | |
| DANSK DS/EN 15048-1 | EN-Non-preloaded structural bolting assemblies - Part 1: General requirements | |
| DANSK DS/EN 15048-2 | EN-Non-preloaded structural bolting assemblies - Part 2: Suitability test | |
| DANSK DS/EN 1515-1 | EN-Flanges and their joints - Bolting - Part 1: Selection of bolting | |
| DANSK DS/EN 1515-4 | EN-Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC | |
| DANSK DS/EN 15341 | EN-Maintenance - Maintenance Key Performance Indicators | |
| DANSK DS/EN 15800 | EN-Cylindrical helical springs made of round wire - Quality specifications for cold coiled compression springs | |
| DANSK DS/EN 1661 | EN-Hexagon nuts with flange | |
| DANSK DS/EN 1662 | EN-Hexagon bolts with flange - Small series | |
| DANSK DS/EN 1662/AC | EN-Hexagon bolts with flange - Small series | |
| DANSK DS/EN 1663 | EN-Prevailing torque type hexagon nuts with flange (with non-metallic insert) | |
| DANSK DS/EN 1664 | EN-Prevailing torque type all-metal hexagon nuts with flange | |
| DANSK DS/EN 1665 | EN-Hexagon bolts with flange - Heavy series | |
| DANSK DS/EN 1665/AC | EN-Hexagon bolts with flange - Heavy series | |
| DANSK DS/EN 1666 | EN-Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread | |
| DANSK DS/EN 1667 | EN-Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread | |
| DANSK DS/EN 20225 | EN-Fasteners - Bolts screws studs and nuts - Symbols and designations of dimensions | |
| DANSK DS/EN 20273 | EN-Fasteners - Clearance holes for bolts and screws | |
| DANSK DS/EN 20898-2 | EN-Mechanical properties of fasteners - Part 2: Nuts with specified proof load values - Coarse thread | |
| DANSK DS/EN 20898-7 | EN-Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | |
| DANSK DS/EN 22339 | EN-Taper pins - Unhardened | |
| DANSK DS/EN 22340 | EN-Clevis pins without head |
1 2 3 4 5 > >