DS - Glass and Ceramics Industries Collection
This collection contains documents from the following standards organization(s): Dansk Standard 1 2 3 4 > >
| DANSK DS/CEN/TR 13233/AC | EN-Advanced technical ceramics - Notations and symbols | |
| DANSK DS/CEN/TS 1007-7 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilame | |
| DANSK DS/CEN/TS 1071-11 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula | |
| DANSK DS/CEN/TS 1071-8 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion | |
| DANSK DS/CEN/TS 1159-4 | EN-Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity | |
| DANSK DS/CEN/TS 14425-1 | EN-Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection | |
| DANSK DS/CEN/TS 14425-5 | EN-Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method | |
| DANSK DS/CEN/TS 15365 | EN-Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method | |
| DANSK DS/CEN/TS 15418 | EN-Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids | |
| DANSK DS/CEN/TS 15418 | EN-Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids | |
| DANSK DS/CEN/TS 15658 | EN-Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method | |
| DANSK DS/CEN/TS 15866 | EN-Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres | |
| DANSK DS/CEN/TS 15867 | EN-Advanced technical ceramics - Ceramic composites - Guide to the determination of the degree of misalignment in uniaxial mechanical tests | |
| DANSK DS/CEN/TS 15880 | EN-Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method | |
| DANSK DS/CEN/TS 15881 | EN-Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites | |
| DANSK DS/EN 1006 | EN-Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties | |
| DANSK DS/EN 1007-1 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 1: Determination of size content | |
| DANSK DS/EN 1007-2 | EN-Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density | |
| DANSK DS/EN 1007-3 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area | |
| DANSK DS/EN 1007-4 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 4: Determination of tensile properties of filaments at ambient temperature | |
| DANSK DS/EN 1007-5 | EN-Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament t | |
| DANSK DS/EN 1007-6 | EN-Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature | |
| DANSK DS/EN 1036-1 | EN-Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions requirements and test methods | |
| DANSK DS/EN 1036-2 | EN-Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard | |
| DANSK DS/EN 1051-1 | EN-Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description | |
| DANSK DS/EN 1051-2 | EN-Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard | |
| DANSK DS/EN 1063 | EN-Glass in building - Security glazing - Testing and classification of resistance against bullet attack | |
| DANSK DS/EN 1071-1 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer | |
| DANSK DS/EN 1071-10 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning | |
| DANSK DS/EN 1071-12 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test | |
| DANSK DS/EN 1071-13 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method | |
| DANSK DS/EN 1071-2 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method | |
| DANSK DS/EN 1071-3 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test | |
| DANSK DS/EN 1071-4 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) | |
| DANSK DS/EN 1071-6 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test | |
| DANSK DS/EN 1071-9 | EN-Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain | |
| DANSK DS/EN 1094-1 | EN-Insulating refractory products - Part 1: Terminology classification and methods of test for high temperature insulation wool products | |
| DANSK DS/EN 1094-2 | EN-Insulating refractory products - Part 2: Classification of shaped products | |
| DANSK DS/EN 1094-4 | EN-Insulating refractory products - Part 4: Determination of bulk density and true porosity | |
| DANSK DS/EN 1094-6 | EN-Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating | |
| DANSK DS/EN 1096-1 | EN-Glass in building - Coated glass - Part 1: Definitions and classification | |
| DANSK DS/EN 1096-2 | EN-Glass in building - Coated glass - Part 2: Requirements and test methods for class of A B and S coatings | |
| DANSK DS/EN 1096-3 | EN-Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings | |
| DANSK DS/EN 1096-4 | EN-Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard | |
| DANSK DS/EN 1096-4/Till. 1 | EN-Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard | |
| DANSK DS/EN 1159-1 | EN-Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion | |
| DANSK DS/EN 1159-2 | EN-Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity | |
| DANSK DS/EN 1159-3 | EN-Advanced technical ceramics - Ceramic composites thermophysical properties - Part 3: Determination of specific heat capacity | |
| DANSK DS/EN 1159-3/AC | EN-Advanced technical ceramics - Ceramic composites thermophysical properties - Part 3: Determination of specific heat capacity | |
| DANSK DS/EN 12150-1 | ||
| DANSK DS/EN 12150-1 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description | |
| DANSK DS/EN 12150-2 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| DANSK DS/EN 12150-2/Till. 1 | EN-Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard | |
| DANSK DS/EN 1217 | EN-Materials and articles in contact with foodstuffs - Test methods for water absorption of ceramic articles | |
| DANSK DS/EN 12289 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties | |
| DANSK DS/EN 12290 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties | |
| DANSK DS/EN 12291 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties | |
| DANSK DS/EN 12337-1 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description | |
| DANSK DS/EN 12337-2 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| DANSK DS/EN 12337-2/Till. 1 | EN-Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| DANSK DS/EN 12475-4 | EN-Classification of dense shaped refractory products - Part 4: Special products | |
| DANSK DS/EN 12600 | EN-Glass in building - Pendulum test - Impact test method for flat glass | |
| DANSK DS/EN 12603 | EN-Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data | |
| DANSK DS/EN 12698-1 | EN-Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods | |
| DANSK DS/EN 12698-2 | EN-Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods | |
| DANSK DS/EN 12758 | EN-Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties | |
| DANSK DS/EN 12788 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength | |
| DANSK DS/EN 12789 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength | |
| DANSK DS/EN 12875-4 | EN-Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles | |
| DANSK DS/EN 12875-5 | EN-Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles | |
| DANSK DS/EN 1288-1 | EN-Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass | |
| DANSK DS/EN 1288-2 | EN-Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas | |
| DANSK DS/EN 1288-3 | EN-Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) | |
| DANSK DS/EN 1288-4 | EN-Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass | |
| DANSK DS/EN 1288-5 | EN-Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas | |
| DANSK DS/EN 12898 | EN-Glass in building - Determination of the emissivity | |
| DANSK DS/EN 12923-1 | EN-Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests | |
| DANSK DS/EN 13022-1 + A1 | EN-Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing | |
| DANSK DS/EN 13022-2 + A1 | EN-Glass in building - Structural sealant glazing - Part 2: Assembly rules |
1 2 3 4 > >