DS - Aircraft and Space Vehicle Engineering Collection
This collection contains documents from the following standards organization(s):
Dansk Standard
Most Popular Standards from the DS - Aircraft and Space Vehicle Engineering Collection
| DANSK DS/EN 2853 | EN-Aerospace series - Current ratings for electrical cables with conductor EN 2083 | |
| DANSK DS/EN 2635 | EN-Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D <= 200 mm with peripheral coarse grain control | |
| DANSK DS/EN 2694 | EN-Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 04 mm <= a <= 6 mm | |
| DANSK DS/EN 13290-4 | EN-Space project management - General requirements - Part 4: Project phasing and planning | |
| DANSK DS/EN 2714-013 | EN-Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between - 55 -C and 260 -C - Part 013: DR family screened (spiral) and jacketed UV laser printable - Produ | |
| DANSK DS/EN 3155-003 | EN-Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts electrical female type A crimp class S - Product standard | |
| DANSK DS/EN 2090 | EN-Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 03 mm <= a <= 6 mm | |
| DANSK DS/EN 2377 | EN-Aerospace series - Glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strenght | |
| DANSK DS/EN 2083 | EN-Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard | |
| DANSK DS/EN 14091 | EN-Space product assurance - Thermal vacuum outgassing test for the screening of space materials | |
| DANSK DS/EN 2326 | EN-Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D > or = 200 mm | |
| DANSK DS/EN 2050 | EN-Aerospace series - Extruded T-section in aluminium alloys - Dimensions | |
| DANSK DS/EN 3015 | EN-Aerospace series - Shank nuts self-locking serrated in heat resisting steel FE-PA2601 (A286) silver plated - Classification: 1100 MPa (at ambient temperature)/650 -C | |
| DANSK DS/EN 2511 | EN-Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a <= 100 mm | |
| DANSK DS/EN 2693 | EN-Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 03 mm <= a <= 6 mm | |
| DANSK DS/EN 2560 | EN-Aerospace series - Carbon fibre preimpregnates - Determination of the resin flow | |
| DANSK DS/EN 14777 | EN-Space engineering - Multipaction design and test | |
| DANSK DS/EN 2536 | EN-Aerospace series - Hard anodizing of aluminium alloys | |
| DANSK DS/EN 2561 | EN-Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction | |
| DANSK DS/EN 1361 | EN-Rubber hoses and hose assemblies for aviation fuel handling - Specification | |
| DANSK DS/EN 2564 | EN-Aerospace series - Carbon fibre laminates - Determination of the fibre resin and void contents | |
| DANSK DS/EN 2584 | EN-Aerospace series - Bearings spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads | |
| DANSK DS/EN 2243-2 | EN-Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal | |
| DANSK DS/EN 2585 | EN-Aerospace series - Bearings spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads | |
| DANSK DS/EN 2591-100 | EN-Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General | |
| DANSK DS/EN 14101 | EN-Space product assurance - Material selection for controlling stress-corrosion cracking | |
| DANSK DS/EN 2133 | EN-Aerospace series - Cadmium plating of steels with specified tensile strength <= 1 450 MPa copper copper alloys and nickel alloys | |
| DANSK DS/EN 2498 | EN-Aerospace series - Rod ends adjustable self-aligning plain bearing with self-lubricating liner and threaded shank - Dimensions and loads | |
| DANSK DS/EN 3049 | EN-Aerospace series - O-rings in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD | |
| DANSK DS/EN 3230 | EN-Aerospace series - Nuts hexagon slotted/castellated reduced height normal across flats in steel cadmium plated Classification: 900 MPa (at ambient temperature)/235 -C | |
| DANSK DS/EN 2632 | EN-Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control | |
| DANSK DS/EN 2747 | EN-Aerospace series - Glass fibre reinforced plastics - Tensile test | |
| DANSK DS/EN 2803 | EN-Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1 mm <= a <= 6 mm | |
| DANSK DS/EN 3084/AC | EN-Aerospace series - Pipe coupling 8-30' in titanium alloy - Unions welded end threaded for repair | |
| DANSK DS/EN 2290-1 | EN-Aerospace series - Rod bodies flight control in aluminium alloy for adjustable end fittings - Part 1: Dimensions and loads | |
| DANSK DS/EN 2048 | EN-Aerospace series - Extruded L-section in aluminium alloys - Dimensions | |
| DANSK DS/EN 2746 | EN-Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method | |
| DANSK DS/EN 2944 | EN-Aerospace series - Inserts screw thread helical coil self-locking in corrosion resisting steel FE-PA3004 | |
| DANSK DS/EN 14738 | EN-Space product assurance - Hazard analysis | |
| DANSK DS/EN 2088 | EN-Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 04 mm <= a <= 6 mm | |
| DANSK DS/EN 2243-3 | EN-Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core | |
| DANSK DS/EN 2395 | EN-Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 04 mm <= a <= 6 mm | |
| DANSK DS/ISO 5129 | EN-Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight | |
| DANSK DS/EN 12312-11 | EN-Aircraft ground support equipment - Specific requirements - Part 11: Container/pallet dollies and loose load trailers | |
| DANSK DS/EN 2092 | EN-Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 04 mm <= a <= 6 mm | |
| DANSK DS/EN 2338 | EN-Aerospace series - Sheets hot rolled in titanium and titanium alloys - Thickness 08 mm < a < 6 mm - Dimensions | |
| DANSK DS/EN 2484 | EN-Aerospace series - Microfilming of drawings - Aperture card for 35 mm microfilm | |
| DANSK DS/EN 2486 | EN-Aerospace series - Aluminium alloy AL-P2618A - Forging stock | |
| DANSK DS/EN 2810 | EN-Aerospace series - Nuts hexagon slotted/castellated reduced hight normal across flats in heat resisting steel passivated - Classification: 900 MPa (at ambient temperature)/650 - C | |
| DANSK DS/EN 2913 | EN-Aerospace series - Washers flat large diameter in steel cadmium plated |
View Alphabetical Listing of Documents
- Documents: DANSK DS/EN 12312-10 + A1 to DANSK DS/EN 2023
- Documents: DANSK DS/EN 2032-2 to DANSK DS/EN 2155-8
- Documents: DANSK DS/EN 2157-1 to DANSK DS/EN 2267-003
- Documents: DANSK DS/EN 2267-007 to DANSK DS/EN 2375
- Documents: DANSK DS/EN 2378 to DANSK DS/EN 2573
- Documents: DANSK DS/EN 2575 to DANSK DS/EN 2591-418
- Documents: DANSK DS/EN 2591-420 to DANSK DS/EN 2606
- Documents: DANSK DS/EN 2608 to DANSK DS/EN 2802
- Documents: DANSK DS/EN 2808 to DANSK DS/EN 2955
- Documents: DANSK DS/EN 2986 to DANSK DS/EN 3112
- Documents: DANSK DS/EN 3114-002 to DANSK DS/EN 3155-074
- Documents: DANSK DS/EN 3160 to DANSK DS/EN 3329
- Documents: DANSK DS/EN 3332 to DANSK DS/EN 3475-411
- Documents: DANSK DS/EN 3475-413 to DANSK DS/EN 3553
- Documents: DANSK DS/EN 3561/AC to DANSK DS/EN 3660-064
- Documents: DANSK DS/EN 3661-001 to DANSK DS/EN 3733-105
- Documents: DANSK DS/EN 3733-108 to DANSK DS/EN 3841-301
- Documents: DANSK DS/EN 3841-303 to DANSK DS/EN 3934
- Documents: DANSK DS/EN 3936 to DANSK DS/EN 4030
- Documents: DANSK DS/EN 4032 to DANSK DS/EN 4131
- Documents: DANSK DS/EN 4132 to DANSK DS/EN 4247
- Documents: DANSK DS/EN 4258 to DANSK DS/EN 4434
- Documents: DANSK DS/EN 4450 to DANSK DS/EN 4604-008
- Documents: DANSK DS/EN 4604-010 to DANSK DS/EN 9104-003