EUROFILE - Administration/Test and Measurement Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN ISO 4074 | EN-Natural latex rubber condoms - Requirements and test methods | |
| CEN EN ISO 4126-1 | EN-Safety devices for protection against excessive pressure - Part 1: Safety valves-ISO 4126-1:2004; Incorporating Corrigendum August 2006 | |
| CEN EN ISO 4126-2 | EN-Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices-Incorporating corrigendam September 2004 and July 2006 | |
| CEN EN ISO 4126-3 | EN-Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination | |
| CEN EN ISO 4126-4 | EN-Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves-ISO 4126-4:2004 | |
| CEN EN ISO 4126-5 | EN-Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS)-ISO 4216-5:2004 | |
| CEN EN ISO 4126-6 | EN-Safety devices for protection against excessive pressure - Part 6: Application selection and installation of bursting disc safety-ISO 4126-6:2003 | |
| CEN EN ISO 4126-7 | EN-Safety devices for protection against excessive pressure - Part 7: Common data-ISO 4126-7:2004 | |
| CEN EN ISO 4135 | EN-Anaesthetic and Respiratory Equipment - Vocabulary-ISO 4135:2001 | |
| CEN EN ISO 4172 | EN-Technical Drawings - Construction Drawings - Drawings for the Assembly of Prefabricated Structures-ISO 4172: 1991 | |
| CEN EN ISO 4287 | EN-Geometrical product specification (GPS) - Surface texture: Profile method - Terms definitions and surface texture parameters-Incorporates Amendment A1: 2009 | |
| CEN EN ISO 4288 | EN-Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface Texture | |
| CEN EN ISO 4373 | EN-Hydrometry - Water level measuring devices | |
| CEN EN ISO 4375 | EN-Hydrometric determinations - Cableway systems for stream gauging-ISO 4375:2000 | |
| CEN EN ISO 445 | EN-Pallets for materials handling - Vocabulary | |
| CEN EN ISO 4518 | EN-Metallic Coatings - Measurement of Coating Thickness - Profilometric Method (ISO 4518:1990) | |
| CEN EN ISO 4589-1 | EN-Plastics - Determination of Burning Behaviour by Oxygen Index - Part 1: Guidance | |
| CEN EN ISO 4589-2 | EN-Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test-Includes A1: April 2006; ISO 4598-2:1996 | |
| CEN EN ISO 4618 | EN-Paints and varnishes - Terms and definitions-ISO 4618:2006; Supersedes EN 971-1:1996 EN ISO 4618-2:1999 EN ISO 4618-3:1999 | |
| CEN EN ISO 463 | EN-Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges | |
| CEN EN ISO 472 | EN-Plastics - Vocabulary | |
| CEN EN ISO 4787 | EN-Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use | |
| CEN EN ISO 4788 | EN-Laboratory glassware - Graduated measuring cylinders-ISO 4788: 2005 | |
| CEN EN ISO 4823 | EN-Dentistry - Elastomeric Impression Materials-Incorporates Amendment A1: July 2007 | |
| CEN EN ISO 4824 | EN-Dentistry - Ceramic Denture Teeth-ISO 4824: 1993; Includes Amendment A1: 2000 | |
| CEN EN ISO 4833 | EN-Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C-ISO 4833: 2003 | |
| CEN EN ISO 4869-2 | EN-Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn-Incorporating Corrigendum: June 2007 | |
| CEN EN ISO 4869-4 | EN-Acoustics - Hearing Protectors - Part 4: Measurement of Effective Sound Pressure Levels for Level-Dependent Sound-Restoration Ear-Muffs-ISO/TR 4869-4:1998 | |
| CEN EN ISO 4871 | EN-Acoustics - Declaration and verification of noise emission values of machinery and equipment | |
| CEN EN ISO 4921 | EN-Knitting - Basic Concepts - Vocabulary-ISO 4921:2000 | |
| CEN EN ISO 5136 | EN-Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method | |
| CEN EN ISO 5167-1 | EN-Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements-ISO 5167-1:2003; | |
| CEN EN ISO 5167-2 | EN-Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates-ISO 5167-2:2003; Supersedes EN ISO 5167-1:1995 | |
| CEN EN ISO 5167-3 | EN-Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles-ISO 5167-3: 2003; Supersedes EN ISO 5167-1: 1995 | |
| CEN EN ISO 5167-4 | EN-Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes-ISO 5167-4:2003; Supersedes EN ISO 5167-1:1995 | |
| CEN EN ISO 5171 | EN-Gas welding equipment - Pressure gauges used in welding cutting and allied processes | |
| CEN EN ISO 5261 | EN-Technical Drawings - Simplified Representation of Bars and Profile Sections-ISO 5261:1995 | |
| CEN EN ISO 5349-1 | EN-Mechanical Vibration - Measurement and Assessment of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements | |
| CEN EN ISO 5349-2 | EN-Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace-ISO 5349-2:2001 | |
| CEN EN ISO 5356-1 | EN-Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets-; ISO 5356-1:2004 | |
| CEN EN ISO 5356-2 | EN-Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors | |
| CEN EN ISO 5359 | EN-Low-pressure hose assemblies for use with medical gases | |
| CEN EN ISO 5360 | EN-Anaesthetic vaporizers - Agent-specific filling systems | |
| CEN EN ISO 5366-1 | EN-Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults | |
| CEN EN ISO 5436-1 | EN-Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 1: Material Measures-ISO 5436-1:2000 | |
| CEN EN ISO 5436-2 | EN-Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Measurement Standards - Part 2: Software Measurement Standards | |
| CEN EN ISO 5436-2/PRA1 | EN-Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards - Amendment 1 | |
| CEN EN ISO 5455 | EN-Technical Drawings - Scales (ISO 5455 : 1979) | |
| CEN EN ISO 5456-1 | EN-Technical drawings Projection methods Part 1: Synopsis-ISO 5456-1:1996 | |
| CEN EN ISO 5456-2 | EN-Technical drawings Projection methods Part 2: Orthographic representations-ISO 5456-2: 1996 | |
| CEN EN ISO 5456-3 | EN-Technical drawings Projection methods Part 3: Axonometric representations | |
| CEN EN ISO 5457 | EN-Technical Product Documentation - Sizes and Layout of Drawing Sheets-ISO 5457:1999 | |
| CEN EN ISO 5458 | EN-Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing-ISO 5458:1998 | |
| CEN EN ISO 5492 | EN-Sensory analysis - Vocabulary | |
| CEN EN ISO 5659-2 | EN-Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test | |
| CEN EN ISO 5667-1 | EN-Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques-Incorporating corrigendum March 2007 | |
| CEN EN ISO 5667-13 | EN-Water Quality - Sampling - Part 13: Guidance on Sampling of Sludges from Sewage and Water Treatment Works-ISO 5667-13:1997 | |
| CEN EN ISO 5667-15 | EN-Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples | |
| CEN EN ISO 5667-16 | EN-Water Quality - Sampling - Part 16: Guidance on Biotesting of Samples-ISO 5667-16: 1998 | |
| CEN EN ISO 5667-19 | EN-Water quality Sampling Part 19: Guidance on sampling in marine sediments-ISO 5667-19:2004 | |
| CEN EN ISO 5667-3 | EN-Water Quality - Sampling - Part 3: Guidance on the Preservation and Handling of Samples-ISO 5667-3:2003 | |
| CEN EN ISO 5840 | EN-Cardiovascular implants - Cardiac valve prostheses | |
| CEN EN ISO 5845-1 | EN-Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles-ISO 5845-1:1995 | |
| CEN EN ISO 595-2 | EN-Reusable All-Glass or Metal-And-Glass Syringes for Medical Use - Part 2. Design Performance Requirements and Tests (ISO 595-2:1987) | |
| CEN EN ISO 5961 | EN-Water Quality - Determination of Cadmium by Atomic Absorption Spectrometry (ISO 5961 : 1994) | |
| CEN EN ISO 6009 | EN-Hypodermic Needles for Single Use - Colour Coding for Identification; (ISO 6009 : 1992) | |
| CEN EN ISO 6165 | EN-Earth-moving machinery - Basic types - Identification and terms and definitions-ISO 6165: 2006 | |
| CEN EN ISO 6222 | EN-Water Quality - Enumeration of Culturable Micro-Organisms - Colony Count by Inoculation in a Nutrient Agar Culture Medium | |
| CEN EN ISO 6284 | EN-Construction Drawings - Indication of Limit Deviations-ISO 6284:1996 | |
| CEN EN ISO 6341 | EN-Water Quality - Determination of the Inhibition of the Mobility of Daphnia Magna Straus (Cladocera Crustacea) - Acute Toxicity Test (ISO 6341 : 1996) | |
| CEN EN ISO 6360-1 | EN-Dentistry Number coding system for rotary instruments Part 1: General characteristics-Supersedes EN 26360-1:1990 | |
| CEN EN ISO 6360-2 | EN-Dentistry - Number coding system for rotary instruments - Part 2: Shapes | |
| CEN EN ISO 6360-3 | EN-Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters | |
| CEN EN ISO 6360-4 | EN-Dentistry Number coding system for rotary instruments Part 4: Specific characteristics of diamond instruments-ISO 6360-4:2004 | |
| CEN EN ISO 6360-5 | EN-Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments | |
| CEN EN ISO 6360-6 | EN-Dentistry Number coding system for rotary instruments Part 6: Specific characteristics of abrasive instruments-ISO 6360-6:2004 | |
| CEN EN ISO 6360-7 | EN-Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments-ISO 6360-7:2006 | |
| CEN EN ISO 6385 | EN-Ergonomic principles in the design of work systems-ISO 6385:2004; | |
| CEN EN ISO 6410-1 | EN-Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions (ISO 6410-1 : 1993) |