EUROFILE - Administration/Test and Measurement Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN ISO 1680 | EN-Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machinery-ISO 1680: 1999 | |
| CEN EN ISO 1683 | EN-Acoustics - Preferred reference values for acoustical and vibratory levels | |
| CEN EN ISO 1716 | EN-Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) | |
| CEN EN ISO 17201-1 | EN-Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement-ISO 17201-1: 2005 | |
| CEN EN ISO 17201-2 | EN-Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation-ISO 17201-2:2006 | |
| CEN EN ISO 17201-3 | EN-Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations | |
| CEN EN ISO 17201-4 | EN-Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound | |
| CEN EN ISO 17201-5 | EN-Acoustics - Noise from shooting ranges - Part 5: Noise management | |
| CEN EN ISO 17249 | EN-Safety footwear with resistance to chain saw cutting-ISO 17249:2004 | |
| CEN EN ISO 17249 | EN-Safety footwear with resistance to chain saw cutting-Incorporates Amendment A1: 2007 | |
| CEN EN ISO 17264 | EN-Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces | |
| CEN EN ISO 17287 | EN-Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving-ISO 17287:2003 | |
| CEN EN ISO 17294-1 | EN-Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines | |
| CEN EN ISO 17294-2 | EN-Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements-ISO 17294-2:2003 | |
| CEN EN ISO 17353 | EN-Water quality - Determination of selected organotin compounds - Gas chromatographic method | |
| CEN EN ISO 17491-3 | EN-Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) | |
| CEN EN ISO 17491-4 | EN-Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) | |
| CEN EN ISO 17495 | EN-Water quality Determination of selected nitrophenols Method by solid-phase extraction and gas chromatography with mass spectrometric detection-ISO 17495: 2001 | |
| CEN EN ISO 17510-1 | EN-Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment | |
| CEN EN ISO 17510-2 | EN-Sleep apnoea breathing therapy - Part 2: Masks and application accessories | |
| CEN EN ISO 17511 | EN-In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials-ISO 17511:2003 | |
| CEN EN ISO 17624 | EN-Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens-ISO 17624:2004 | |
| CEN EN ISO 17652-4 | EN-Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 4: Emission of Fumes and Gases-ISO 17652-4:2003 | |
| CEN EN ISO 17659 | EN-Welding Multilingual terms for welded joints with illustrations-; ISO 17659:2002 | |
| CEN EN ISO 17664 | EN-Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices | |
| CEN EN ISO 17665-1 | EN-Sterilization of health care products - Moist heat - Part 1: Requirements for the development validation and routine control of a sterilization process for medical devices-Supersedes EN 554:1994; ISO 17665-1:2006 | |
| CEN EN ISO 17677-1 | EN-Resistance welding - Vocabulary - Part 1: Spot projection and seam welding | |
| CEN EN ISO 17852 | EN-Water quality - Determination of mercury - Method using atomic fluorescence spectrometry | |
| CEN EN ISO 1797-1 | EN-Dental rotary instruments - Shanks - Part 1: Shanks made of metals-Includes Amendment A1: 1999; ISO 1797-1: 1992 + A1: 1997 | |
| CEN EN ISO 17993 | EN-Water quality Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction | |
| CEN EN ISO 17994 | EN-Water quality - Criteria for establishing equivalence between microbiological methods-ISO 17994:2004 | |
| CEN EN ISO 18064 | EN-Thermoplastic elastomers - Nomenclature and abbreviated terms-(ISO 18064):2003 | |
| CEN EN ISO 18113-1 | EN-In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms definitions and general requirements | |
| CEN EN ISO 18113-2 | EN-In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use | |
| CEN EN ISO 18113-3 | EN-In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use | |
| CEN EN ISO 18113-4 | EN-In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing | |
| CEN EN ISO 18113-5 | EN-In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing | |
| CEN EN ISO 18153 | EN-In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials-ISO 181 | |
| CEN EN ISO 18369-1 | EN-Ophthalmic optics - Contact lenses - Part 1: Vocabulary classification system and recommendations for labelling specifications-Incorporates Amendment A1: 2009 | |
| CEN EN ISO 18369-2 | EN-Ophthalmic optics - Contact lenses - Part 2: Tolerances-ISO 18369-2:2006; Partially supersedes EN ISO 8321-1:2002 and EN ISO 8321-2:2000 | |
| CEN EN ISO 18369-2/PRA1 | EN-Ophthalmic optics - Contact lenses - Part 2: Tolerances | |
| CEN EN ISO 18369-3 | EN-Ophthalmic optics Contact lenses Part 3: Measurement methods-ISO 18369-3:2006; Supersedes EN ISO 10338:1997 EN ISO 10344:1998 EN ISO 8599:1996 EN ISO 9337-1:2000 EN ISO 9337-2:2004EN ISO 9338:1998 EN ISO 9339 | |
| CEN EN ISO 18369-4 | EN-Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials-Supersedes EN ISO 10339:1999 EN ISO 10340:1996 EN ISO 11984:1999 EN ISO 9913-1:1998 EN ISO 9913-2:2000 EN ISO 991 | |
| CEN EN ISO 18412 | EN-Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water-ISO 18412:2005 | |
| CEN EN ISO 18416 | EN-Cosmetics - Microbiology - Detection of Candida albicans | |
| CEN EN ISO 18472 | EN-Sterilization of health care products - Biological and chemical indicators - Test equipment-ISO 18472:2006 | |
| CEN EN ISO 18513 | EN-Tourism services - Hotels and other types of tourism accommodation - Terminology-ISO 18513:2003 | |
| CEN EN ISO 18777 | EN-Transportable liquid oxygen systems for medical use - Particular requirements | |
| CEN EN ISO 18778 | EN-Respiratory equipment - Infant monitors - Particular requirements | |
| CEN EN ISO 18779 | EN-Medical devices for conserving oxygen and oxygen mixtures - Particular requirements-ISO 18779:2005 | |
| CEN EN ISO 18856 | EN-Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry-ISO 18856:2004 | |
| CEN EN ISO 18857-1 | EN-Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection-ISO 18857-1:2005 | |
| CEN EN ISO 19011 | EN-Guidelines for quality and/or environmental management systems auditing-ISO 19011: 2002; Supersedes EN ISO 14010: 1996 EN ISO 14011: 1996 EN ISO 14012: 1996 EN 30011-1: 1993 EN 30011-2: 1993 and EN 30011-3: 1993 | |
| CEN EN ISO 19054 | EN-Rail systems for supporting medical equipment-ISO 19054:2005 | |
| CEN EN ISO 1942 | EN-Dentistry - Vocabulary | |
| CEN EN ISO 19458 | EN-Water quality - Sampling for microbiological analysis-ISO 19458:2006 | |
| CEN EN ISO 19493 | EN-Water quality - Guidance on marine biological surveys of hardsubstrate communities | |
| CEN EN ISO 1968 | EN-Fibre ropes and cordage - Vocabulary-ISO 1968:2004 | |
| CEN EN ISO 19952 | EN-Footwear - Vocabulary-ISO 19952:2005 | |
| CEN EN ISO 19980 | EN-Ophthalmic instruments - Corneal topographers-iso 19980: 2005 | |
| CEN EN ISO 20079 | EN-Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test | |
| CEN EN ISO 20344 | EN-Personal protective equipment - Test methods for footwear-Incorporating Corrigendum December 2005;Incorporates Amendment A1: 2007 | |
| CEN EN ISO 20345 | EN-Personal protective equipment - Safety footwear-ISO 20345:2004; Supersedes EN 345:1992 EN 345-2:1996 | |
| CEN EN ISO 20345 | EN-Personal protective equipment - Safety footwear-Incorporating corrigendum February 2007 | |
| CEN EN ISO 20346 | EN-Personal protective equipment - Protective footwear-Incorporating Amendment 1: 2007; Incorporating corrigendum February 2007 | |
| CEN EN ISO 20346 | EN-Personal protective equipment - Protective footwear-ISO 20346:2004; Supersedes EN 346:1992 EN 346-2:1996 | |
| CEN EN ISO 20347 | EN-Personal protective equipment - Occupational footwear-ISO 20347:2004; EN 347:1992 EN 347-2:1996 | |
| CEN EN ISO 20347 | EN-Personal protective equipment - Occupational footwear-Incorporating corrigendum February 2007; Incorporates Amendment A1: 2007 | |
| CEN EN ISO 20361 | EN-Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy-Incorporating Corrigendum July 2010 | |
| CEN EN ISO 2064 | EN-Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness-ISO 2064: 1996 | |
| CEN EN ISO 20643 | EN-Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission | |
| CEN EN ISO 20685 | EN-3-D scanning methodologies for internationally compatible anthropometric databases-ISO 20685: 2005 | |
| CEN EN ISO 20743 | EN-Textiles - Determination of antibacterial activity of antibacterial finished products | |
| CEN EN ISO 20776-1 | EN-Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for | |
| CEN EN ISO 20776-2 | EN-Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 2: Evaluation of perfor | |
| CEN EN ISO 20795-1 | EN-Dentistry - Base polymers - Part 1: Denture base polymers | |
| CEN EN ISO 20795-2 | EN-Dentistry - Base polymers - Part 2: Orthodontic base polymers | |
| CEN EN ISO 2080 | EN-Metallic and other inorganic coatings - Surface treatment metallic and other inorganic coatings - Vocabulary | |
| CEN EN ISO 20837 | EN-Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for sample preparation for qualitative detection-ISO 20837: 2006 |