EUROFILE - Administration/Test and Measurement Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 840-5 | EN-Mobile waste containers - Part 5: Performance requirements and test methods | |
| CEN EN 840-6 | EN-Mobile waste containers - Part 6: Safety and health requirements-Incorporates Amendment A1: 2008 | |
| CEN EN 842 | EN-Safety of machinery - Visual danger signals - General requirements design and testing-Incorporates Amendment A1: 2008 | |
| CEN EN 844-1 | EN-Round and Sawn Timber - Terminology - Part 1: General Terms Common to Round Timber and Sawn Timber | |
| CEN EN 844-10 | EN-Round and Sawn Timber - Terminology - Part 10: Terms Relating to Stain and Fungal Attack | |
| CEN EN 844-11 | EN-Round and Sawn Timber - Terminology - Part 11: Terms Relating to Degrade by Insects | |
| CEN EN 844-12 | EN-Round and Sawn Timber - Terminology - Part 12: Additional Terms and General Index | |
| CEN EN 844-2 | EN-Round and Sawn Timber - Terminology - Part 2: General Terms Relating to Round Timber | |
| CEN EN 844-3 | EN-Round and Sawn Timber - Terminology - Part 3: General Terms Relating to Sawn Timber | |
| CEN EN 844-4 | EN-Round and Sawn Timber - Terminology - Part 4: Terms Relating to Moisture Content | |
| CEN EN 844-5 | EN-Round and Sawn Timber - Terminology - Part 5: Terms Relating to Dimensions of Round Timber | |
| CEN EN 844-6 | EN-Round and Sawn Timber - Terminology - Part 6: Terms Relating to Dimensions of Sawn Timber | |
| CEN EN 844-7 | EN-Round and Sawn Timber - Terminology - Part 7: Terms Relating to Anatomical Structure of Timber | |
| CEN EN 844-8 | EN-Round and Sawn Timber - Terminology - Part 8: Terms Relating to Features of Round Timber | |
| CEN EN 844-9 | EN-Round and Sawn Timber - Terminology - Part 9: Terms Relating to Features of Sawn Timber | |
| CEN EN 848-2 | EN-Safety of Woodworking Machines - One Side Moulding Machines with Rotating Tool - Part 2: Single Spindle Handfed/Integrated Fed Routing Machines | |
| CEN EN 848-3 | EN-Safety of Woodworking Machines - One Side Moulding Machines with Rotating Tool - Part 3: Numerical Control (NC) Boring Machines and Routing Machines | |
| CEN EN 858-1 | EN-Separator Systems for Light Liquids (e.g. Oil and Petrol) - Part 1: Principles of Product Design Performance and Testing Marking and Quality Control-Includes Amendment A1:2004 | |
| CEN EN 858-2 | EN-Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size installation operation and maintenance | |
| CEN EN 863 | EN-Protective Clothing - Mechanical Properties - Test Method: Puncture Resistance | |
| CEN EN 866-4 | EN-Biological Systems for Testing Sterilizers and Sterilization Processes - Part 4: Particular Systems for Use in Irradiation Sterilizers | |
| CEN EN 867-3 | EN-Non-Biological Systems for Use in Sterilizers - Part 3: Specification for Class B Indicators for Use in the Bowie and Dick Test | |
| CEN EN 867-5 | EN-Non-Biological Systems for Use in Sterilizers - Part 5: Specification for Indicator Systems and Process Challenge Devices for Use in Performance Testing for Small Sterilizers Type B and Type S | |
| CEN EN 868-10 | EN-Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods | |
| CEN EN 868-2 | EN-Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods | |
| CEN EN 868-3 | EN-Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements | |
| CEN EN 868-4 | EN-Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods | |
| CEN EN 868-5 | EN-Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods | |
| CEN EN 868-6 | EN-Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods | |
| CEN EN 868-7 | EN-Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods | |
| CEN EN 868-8 | EN-Packaging for terminally sterilized medical devices - Part 8: Reusable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods | |
| CEN EN 868-9 | EN-Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods | |
| CEN EN 872 | EN-Water quality - Determination of suspended solids - Method by filtration through glass fibre filters | |
| CEN EN 894-1 | EN-Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators-Incorporates Amendment A1: 2008 | |
| CEN EN 894-2 | EN-Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays-Incorporates Amendment A1: 2008 | |
| CEN EN 894-3 | EN-Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators-Incorporates Amendment A1: 2008 | |
| CEN EN 894-4 | EN-Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators | |
| CEN EN 903 | EN-Water Quality - Determination of Anionic Surfactants by Measurement of the Methylene Blue Index MBAS (ISO 7875-1:1984 Modified) | |
| CEN EN 9100 | EN-Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design development production installation and servicing | |
| CEN EN 9101 | EN-Aerospace series - Quality management systems - Assessment | |
| CEN EN 9102 | EN-Aerospace series - Quality systems - First article inspection | |
| CEN EN 9103 | EN-Aerospace series - Quality management systems - Variation management of key characteristics | |
| CEN EN 9104 | EN-Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs | |
| CEN EN 9104-002 | EN-Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Registrations Programs | |
| CEN EN 9104-003 | EN-Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification | |
| CEN EN 9110 | EN-Quality Management Systems - Requirements for Aviation Maintenance Organizations | |
| CEN EN 9111 | EN-Aerospace series - Quality management systems - Assessment applicable to maintenance organizations-ISO 9001: 2000 | |
| CEN EN 9120 | EN-Quality Management Systems - Requirements for Aviation Space and Defence Distributors | |
| CEN EN 9121 | EN-Aerospace series - Quality management systems - Assessment applicable to stockist distributors | |
| CEN EN 9131 | EN-Aerospace series - Quality management systems - Nonconformance documentation | |
| CEN EN 9132 | EN-Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking | |
| CEN EN 9133 | EN-Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts-Supersedes EN 3042:1991 | |
| CEN EN 923 | EN-Adhesives - Terms and Definitions-Incorporates Amendment A1: March 2008 | |
| CEN EN 932-3 | EN-Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description-Includes Amendment A1:2003 | |
| CEN EN 934-2 | EN-Admixtures for concrete mortar and grout - Part 2: Concrete admixtures - Definitions requirements conformity marking and labelling | |
| CEN EN 943-1 | EN-Protective clothing against liquid and gaseous chemicals including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated -gas-tight- (Type 1) and -non-gas-tig | |
| CEN EN 943-2 | EN-Protective Clothing Against Liquid and Gaseous Chemicals Including Liquid Aerosols and Solid Particles - Part 2: Performance Requirements for "Gas-Tight" (Type 1) Chemical Protective Suits for Emergency Teams (ET) | |
| CEN EN 953 | EN-Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards-Incorporates Amendment A1: 2009 | |
| CEN EN 954-1 | EN-Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design | |
| CEN EN 960 | EN-Headforms for Use in the Testing of Protective Helmets | |
| CEN EN 966 | EN-Helmets for Airborne Sports-Includes Amendments A1:2000 and A2:2006 | |
| CEN EN 980 | EN-Symbols for use in the labelling of medical devices | |
| CEN EN 981 | EN-Safety of machinery - System of auditory and visual danger and information signals-Incorporates Amendment A1: 2008 | |
| CEN EN ISO 1 | EN-Geometrical Product Specifications (GPS) - Standard Reference Temperature for Geometrical Product Specification and Verification-ISO 1:2002 | |
| CEN EN ISO 10012 | EN-Measurement management systems Requirements for measurement processes and measuring equipment-ISO 10012:2003; Supersedes EN 30012-1:1993 | |
| CEN EN ISO 10052 | EN-Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method-ISO 10052:2004 | |
| CEN EN ISO 10075-1 | EN-Ergonomic Principles Related to Mental Work-Load - Part 1: General Terms and Definitions-ISO 10075:1991 | |
| CEN EN ISO 10075-2 | EN-Ergonomic principles related to mental workload Part 2: Design principles-ISO 10075-2: 1996 | |
| CEN EN ISO 10075-3 | EN-Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload-ISO 10075-3:2004 | |
| CEN EN ISO 10079-1 | EN-Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements | |
| CEN EN ISO 10079-2 | EN-Medical suction equipment - Part 2: Manually powered suction equipment | |
| CEN EN ISO 10079-3 | EN-Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source | |
| CEN EN ISO 10093 | EN-Plastics - Fire Tests - Standard Ignition Sources-ISO 10093:1998 | |
| CEN EN ISO 10135 | EN-Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) | |
| CEN EN ISO 10139-1 | EN-Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use-ISO 10139-1: 2005; Supersedes EN 30139-1:1994 | |
| CEN EN ISO 10139-2 | EN-Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use | |
| CEN EN ISO 10209-2 | EN-Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods (ISO 10209-2 : 1993) | |
| CEN EN ISO 10253 | EN-Water Quality - Marine Algal Growth Inhibition Test with Skeletonema Costatum and Phaeodactylum Tricornutum-ISO 10253: 2006 | |
| CEN EN ISO 10256 | EN-Head and face protection for use in ice hockey-ISO 10256: 2003; Supersedes EN 967: 1996 |