EUROFILE - Administration/Test and Measurement Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 13859-2 | EN-Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls-Incorporates Amendment A1: 2008 | |
| CEN EN 13861 | EN-Safety of machinery Guidance for the application of ergonomics standards in the design of machinery | |
| CEN EN 13867 | EN-Concentrates for haemodialysis and related therapies-Incorporates Amendment A1: 2009 | |
| CEN EN 13868 | EN-Catheters - Test Methods for Kinking of Single Lumen Catheters and Medical Tubing | |
| CEN EN 13878 | EN-Leisure accommodation vehicles - Terms and definitions | |
| CEN EN 13888 | EN-Grout for tiles - Requirements evaluation of conformity classification and designation | |
| CEN EN 13890 | EN-Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods | |
| CEN EN 13911 | EN-Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters | |
| CEN EN 13920-1 | EN-Aluminium and aluminium alloys - Scrap - Part 1: General requirements sampling and tests | |
| CEN EN 13920-10 | EN-Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans | |
| CEN EN 13920-11 | EN-Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators | |
| CEN EN 13920-12 | EN-Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy | |
| CEN EN 13920-13 | EN-Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys | |
| CEN EN 13920-14 | EN-Aluminium and Aluminium Alloys - Scrap - Part 14: Scrap from Post-Consumer Aluminium Packagings | |
| CEN EN 13920-15 | EN-Aluminium and aluminium alloys Scrap Part 15: Decoated aluminium scrap from post-consumer aluminium packagings | |
| CEN EN 13920-16 | EN-Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings drosses spills and metallics | |
| CEN EN 13920-2 | EN-Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap | |
| CEN EN 13920-3 | EN-Aluminium and aluminium alloys Scrap Part 3: Wire and cable scrap | |
| CEN EN 13920-4 | EN-Aluminium and aluminium alloys Scrap Part 4: Scrap consisting of one single wrought alloy | |
| CEN EN 13920-5 | EN-Aluminium and aluminium alloys Scrap Part 5: Scrap consisting of two or more wrought alloys of the same series | |
| CEN EN 13920-6 | EN-Aluminium and aluminium alloys Scrap Part 6: Scrap consisting of two or more wrought alloys | |
| CEN EN 13920-7 | EN-Aluminium and aluminium alloys Scrap Part 7: Scrap consisting of castings | |
| CEN EN 13920-8 | EN-Aluminium and aluminium alloys Scrap Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes | |
| CEN EN 13920-9 | EN-Aluminium and aluminium alloys Scrap Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials | |
| CEN EN 13921 | EN-Personal protective equipment - Ergonomic principles | |
| CEN EN 13922 | EN-Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels | |
| CEN EN 13925-1 | EN-Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 1: General principles | |
| CEN EN 13925-2 | EN-Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures | |
| CEN EN 13925-3 | EN-Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments | |
| CEN EN 13927 | EN-Non-destructive testing - Visual testing - Equipment | |
| CEN EN 13946 | EN-Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers | |
| CEN EN 13949 | EN-Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements testing marking | |
| CEN EN 13956 | EN-Flexible sheet for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics-Incorporating Corrigendum June 2006 | |
| CEN EN 13965-1 | EN-Characterization of waste - Terminology - Part 1: Material related terms and definitions | |
| CEN EN 13965-2 | EN-Characterization of waste - Terminology - Part 2: Management related terms and definitions | |
| CEN EN 13967 | EN-Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics-Incorporates Amendment A1: 2006 | |
| CEN EN 13969 | EN-Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics-Incorporates Amendment A1: November 2006 | |
| CEN EN 1397 | EN-Heat Exchangers - Hydronic Room Fan Coil Units - Test Procedures for Establishing the Performance-Supersedes ENV 1397:1994 | |
| CEN EN 13970 | EN-Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics-Incorporates Amendment A1: November 2006 | |
| CEN EN 13975 | EN-Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects | |
| CEN EN 13976-1 | EN-Rescue systems - Transportation of incubators - Part 1: Interface conditions | |
| CEN EN 13976-2 | EN-Rescue systems - Transportation of incubators - Part 2: System requirements-Incorporating Corrigendum: September 2004 | |
| CEN EN 13980 | EN-Potentially explosive atmospheres - Application of quality systems | |
| CEN EN 13984 | EN-Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics-Incorporates Amendment A1: 2006 | |
| CEN EN 1399 | EN-Resilient Floor Coverings - Determination of Resistance to Stubbed and Burning Cigarettes | |
| CEN EN 140 | EN-Respiratory Protective Devices; Half-Masks and Quarter-Masks; Requirements Testing Marking-Incorporates Amendment A1: 1992 | |
| CEN EN 14011 | EN-Water quality - Sampling of fish with electricity | |
| CEN EN 14012 | EN-Postal services - Quality of service - Complaints handling principles | |
| CEN EN 14016-1 | EN-Binders for magnesite screeds Caustic magnesia and magnesium chloride Part 1: Definitions requirements | |
| CEN EN 1402-1 | EN-Unshaped refractory products Part 1: Introduction and classification-Supersedes ENV 1402-1:1994 | |
| CEN EN 14021 | EN-Stone shields for off-road motorcycling suited to protect riders against stones and debris Requirements and test methods | |
| CEN EN 14025 | EN-Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and Construction | |
| CEN EN 14031 | EN-Workplace atmospheres - Determination of airborne endotoxins | |
| CEN EN 14034-1 | EN-Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure Pmax of dust clouds | |
| CEN EN 14034-2 | EN-Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds | |
| CEN EN 14034-3 | EN-Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds | |
| CEN EN 14034-4 | EN-Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds | |
| CEN EN 14035-1 | EN-Fireworks Part 1: Terminology-Incorporating Corrigendum: January 2005 | |
| CEN EN 14037-1 | EN-Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements | |
| CEN EN 14039 | EN-Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography | |
| CEN EN 14042 | EN-Workplace atmospheres Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents | |
| CEN EN 14043 | EN-High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods-Incorporates Amendment A1: 2009 | |
| CEN EN 14044 | EN-High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods-Incorporates Amendment A1: 2009 | |
| CEN EN 14045 | EN-Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions | |
| CEN EN 14046 | EN-Packaging Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions Method by analysis of released carbon dioxide | |
| CEN EN 14052 | EN-High performance industrial helmets | |
| CEN EN 14057 | EN-Lead and lead alloys Scraps Terms and definitions | |
| CEN EN 14058 | EN-Protective clothing - Garments for protection against cool environments | |
| CEN EN 14065 | EN-Textiles - Laundry processed textiles - Biocontamination control system | |
| CEN EN 14067-1 | EN-Railway applications - Aerodynamics - Part 1: Symbols and units-(Q) | |
| CEN EN 14076 | EN-Timber stairs - Terminology | |
| CEN EN 14079 | EN-Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze | |
| CEN EN 14095 | EN-Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance safety and testing | |
| CEN EN 14096-1 | EN-Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions quantitative measurements of image quality parameters standard reference film and qualitative control | |
| CEN EN 14096-2 | EN-Non-Destructive Testing - Qualification of Radiographic Film Digitisation Systems - Part 2: Minimum Requirements | |
| CEN EN 14115 | EN-Textiles - Burning of Materials for Maquees Large Tents and Related Products - Ease of Ignition | |
| CEN EN 14116 | EN-Tanks for transport of dangerous goods - Digital interface for the product recognition device-Incorporates Amendment A1: 2008 | |
| CEN EN 14119 | EN-Testing of textiles Evaluation of the action of microfungi | |
| CEN EN 14120 | EN-Protective clothing - Wrist palm knee and elbow protectors for users of roller sports equipment - Requirements and test methods-Incorporates Amendment A1: 2007 |