EUROFILE - Administration/Test and Measurement - Historical Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 169 | EN-Personal Eye-Protection: Filters for Welding and Related Techniques; Transmittance Requirements and Recommended Use | |
| CEN EN 170 | EN-Personal Eye-Protection - Ultraviolet Filters - Transmittance Requirements and Recommendations Use | |
| CEN EN 170 | EN-Personal Eye-Protection - Ultraviolet Filters - Transmittance Requirements and Recommended Use | |
| CEN EN 171 | EN-Personal Eye-Protection: Infrared Filters; Transmittance Requirements and Recommended Use | |
| CEN EN 171 | EN-Personal Eye-Protection - Infra Red Filters - Transmittance Requirements and Recommended Use | |
| CEN EN 172 | EN-Personal Eye Protection - Sunglare Filters for Industrial Use | |
| CEN EN 172 | EN-Personal Eye Protection - Sunglare Filters for Industrial Use-Includes Amendment A1: 2000 | |
| CEN EN 1727 | EN-Domestic Furniture - Storage Furniture - Safety Requirements and Test Methods-: 2005 | |
| CEN EN 1731 | EN-Mesh Type Eye and Face Protectors for Industrial and Non-Industrial Use Against Mechanical Hazards and/or Heat-Includes Amendment A1: 1997 | |
| CEN EN 1733 | EN-Suction Catheters for Use in the Respiratory Tract | |
| CEN EN 1733 | EN-Suction Catheters for Use in the Respiratory Tract-Ratified European Text | |
| CEN EN 174 | EN-Personal Eye Protection - Ski Goggles for Downhill Skiing | |
| CEN EN 1755 | EN-Safety of Industrial Trucks - Operation in Potentially Explosive Atmospheres - Use in Flammable Gas Vapour Mist and Dust | |
| CEN EN 176 | EN-Dust-Pressed Ceramic Tiles with a Low Water Absorption (E<=3%) - Group BI | |
| CEN EN 1760-2 | EN-Safety of Machinery - Pressure Sensitive Protective Devices - Part 2: General Principles for the Design and Testing of Pressure Sensitive Edges and Pressure Sensitive Bars | |
| CEN EN 1760-3 | EN-Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers plates wires and similar devices | |
| CEN EN 1760-3 | EN-Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers plates wires and similar devices-Including corrigendum January 2006 | |
| CEN EN 1779 | EN-Non-Destructive Testing - Leak Testing - Criteria for Method and Technique Selection | |
| CEN EN 1782 | EN-Tracheal Tubes and Connectors | |
| CEN EN 1789 | EN-Medical Vehicles and Their Equipment - Road Ambulances-Includes Amendment A1:2003 | |
| CEN EN 1792 | EN-Welding - Multilingual List of Terms for Welding and Related Processes-Ratified European Text | |
| CEN EN 1792 | EN-Welding - Multilingual List of Terms for Welding and Related Processes | |
| CEN EN 1795 | EN-Transportable Gas Cylinders (Excluding LPG) - Procedures for Change of Gas Service-Superseded by EN ISO 11621: 2005 | |
| CEN EN 1807 | EN-Safety of Woodworking Machines - Band Sawing Machines | |
| CEN EN 1819 | EN-Laryngoscopes for Tracheal Intubation - Particular Requirements-Superseded by EN ISO 7376: December 2003 | |
| CEN EN 1820 | EN-Anaesthetic Reservoir Bags | |
| CEN EN 1827 | EN-Respiratory Protective Devices - Half Masks without Inhalation Valves and with Separable Filters to Protect Against Gases or Gases and Particles Only - Requirements Testing Marking | |
| CEN EN 1835 | EN-Respiratory Protective Devices - Light Duty Construction Compressed Air Line Breathing Apparatus Incorporating a Helmet or a Hood - Requirements Testing Marking-Superseded by EN 14594: 2005 | |
| CEN EN 1836 | EN-Personal Eye Protection - Sunglasses and Sunglare Filters for General Use | |
| CEN EN 1836 | EN-Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun-Incorporating Corrigendum January 2006 | |
| CEN EN 1836 | EN-Personal Eye Protection - Sunglasses and Sunglare Filters for General Use-Includes Amendment A1:2001 | |
| CEN EN 1836 | EN-Personal eye protection Sunglasses sunglare filters for general use and filters for direct observation of the sun-Includes amendments A1:2001 and A2:2003 | |
| CEN EN 1837 | EN-Safety of Machinery - Integral Lighting of Machines | |
| CEN EN 1846-2 | EN-Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance-Includes amendment A1:2004 A2:2006 | |
| CEN EN 1846-2 | EN-Firefighting and Rescue Service Vehicles - Part 2: Common Requirements - Safety and Performance | |
| CEN EN 1846-2 | EN-Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance-Includes amendment A1:2004 | |
| CEN EN 1846-2 | EN-Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance-Incorporates Amendment A3: 2009 | |
| CEN EN 1846-3 | EN-Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | |
| CENELEC EN 186100 | EN-Sectional Specification Connector Sets for Optical Fibres and Cables Type F-SMA-Superseded by BS EN 186100: 1994 | |
| CENELEC EN 186210 | EN-Sectional Specification: Connector Sets for Optical Fibres and Cables Type CF08 | |
| CEN EN 1866 | EN-Mobile Fire Extinguishers | |
| CEN EN 1866-1 | EN-Mobile fire extinguishers - Part 1: Characteristics performance and test methods | |
| CEN EN 1870-1 | EN-Safety of Woodworking Machines - Circular Sawing Machines - Part 1: Circular Saw Benches (with and without Sliding Table) and Dimension Saws | |
| CEN EN 1885 | EN-Feather and Down - Terms and Definitions | |
| CEN EN 1898 | EN-Specifications for Flexible Intermediate Bulk Containers (FIBCs) For Non-Dangerous Goods-: 2000 | |
| CEN EN 1915-3 | EN-Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction | |
| CEN EN 1947 | EN-Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles | |
| CEN EN 1948-1 | EN-Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 1: Sampling | |
| CEN EN 1948-2 | EN-Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 2: Extraction and Clean-Up | |
| CEN EN 1948-3 | EN-Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 3: Identification and Quantification | |
| CEN EN 1970 | EN-Adjustable beds for disabled persons - Requirements and test methods-Incorporates Amendment A1: March 2005 | |
| CEN EN 1970 | EN-Adjustable beds for disabled persons - Requirements and test methods-A1: March 2005 | |
| CEN EN 1991-1-2 | EN-Eurocode 1: Actions on structures Part 1-2: General actions Actions on structures exposed to fire-Supersedes ENV 1991-2-2: 1995; (R) | |
| CEN EN 1992-1-2 | EN-Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design-Supersedes ENV 1992-1-2:1995 | |
| CEN EN 1994-1-2 | EN-Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design | |
| CEN EN 1995-1-2 | EN-Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design-Supersedes ENV 1995-1-2:1994 | |
| CEN EN 1995-1-2 | EN-Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design-Incorporating Corrigendum June 2006; Supersedes ENV 1995-1-2:1994 | |
| CEN EN 2 | EN-Classification of Fires | |
| CEN EN 2 | EN-Classification of Fires | |
| CEN EN 20105-A01 | EN-Textiles - Tests for Colour Fastness Part A01 : General Principles of Testing | |
| CEN EN 20286-1 | EN-ISO System of Limits and Fits - Part 1: Bases of Tolerances Deviations and Fits (ISO 286-1 : 1988) | |
| CEN EN 20286-2 | EN-ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts-ISO 286-2 : 1988 | |
| CEN EN 20354 | EN-Acoustics - Measurement of Sound Absorption in a Reverberation Room Amendment 1: Annex D - Test Specimen Mountings for Sound Absorption Tests. | |
| CEN EN 20354 | EN-Acoustics - Measurement of Sound Absorption in a Reverberation Room-Includes Amendment A1: 1997; ISO 354: 1985 + A1: 1997 | |
| CEN EN 20354 | EN-Acoustics - Measurement of Sound Absorption in a Reverberation Room (ISO 354 : 1985) | |
| CEN EN 20594-1 | EN-Conical Fittings with 6 Percent (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1: General Requirements-Includes Amendment 1: 1994; ISO 594-1: 1986 | |
| CEN EN 20594-1 | EN-Conical Fittings with a 6 % (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1: General Requirements (ISO 594-1 : 1986) | |
| CEN EN 20594-1/A1 | EN-AMD 1 Conical Fittings with a 6% (Luer) Taper for Syringes Needles and Certain Other Medical Equipment - Part 1: General Requirements-ISO 594-1: 1986 | |
| CEN EN 207 | EN-Personal Eye-Protection - Filters and Eye- Protection Against Laser Radiation | |
| CEN EN 207 | EN-Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)-Includes amendment A1:2002 | |
| CEN EN 207 | EN-Personal Eye-Protection - Filters and Eye-Protectors Against Laser Radiation (Laser Eye-Protectors)-Amendment A1:2002; Incorporating Corrigendum: September 2004 | |
| CEN EN 207 | EN-Personal Eye-Protection - Filters and Eye-Protection Against Laser Radiation | |
| CEN EN 207 | EN-Personal Eye-Protection - Filters and Eye-Protectors Against Laser Radiation (Laser Eye-Protectors) | |
| CEN EN 20780 | EN-Packaging - Pictorial Marking for Handling of Goods (ISO 780: 1985) | |
| CEN EN 208 | EN-Personal Eye-Protection - Eye-Protectors for Adjustment Work on Lasers and Laser Systems (Laser Adjustment Eye- Protectors) | |
| CEN EN 208 | EN-Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) | |
| CEN EN 208 | EN-Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)-Includes amendment A1:2002 | |
| CEN EN 21559 | EN-Dentistry - Alloys for Dental Amalgam | |
| CEN EN 21560 | EN-Dentistry - Dental Mercury-Superseded by EN ISO 24234:1991 |