EUROFILE - Process and Manufacturing Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN ISO 6978-2 | EN-Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy-ISO 6978-2:2003 | |
| CEN EN ISO 707 | EN-Milk and milk products - Guidance on sampling | |
| CEN EN ISO 712 | EN-Cereals and cereal products - Determination of moisture content - Reference method | |
| CEN EN ISO 7153-1 | EN-Surgical Instruments - Metallic Materials - Part 1: Stainless Steel-ISO 7153-1:1991; Including Amendment 1:1999 | |
| CEN EN ISO 7208 | EN-Skimmed milk whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) | |
| CEN EN ISO 7214 | EN-Cellular Plastics - Polyethylene - Methods of Test | |
| CEN EN ISO 7231 | EN-Polymeric materials cellular flexible - Determination of air flow value at constant pressure-drop | |
| CEN EN ISO 7263 | EN-Corrugating medium - Determination of the flat crush resistance after laboratory fluting | |
| CEN EN ISO 7278-1 | EN-Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 1: General Principles (ISO 7278-1 : 1987) | |
| CEN EN ISO 7278-2 | EN-Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 2: Pipe Provers (ISO 7278-2 : 1988) | |
| CEN EN ISO 7327 | EN-Plastics - Hardeners and Accelerators for Epoxide Resins - Determination of Free Acid in Acid Anhydride | |
| CEN EN ISO 7328 | EN-Milk-based edible ices and ice mixes - Determination of fat content - Gravimetric method (Reference method) | |
| CEN EN ISO 734-1 | EN-Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum)-ISO 734-1: 2006 | |
| CEN EN ISO 734-2 | EN-Oilseed meals - Determination of oil content - Part 2: Rapid extraction method | |
| CEN EN ISO 7384 | EN-Corrosion Test in Artificial Atmosphere - General Requirements (ISO 7384:1986) | |
| CEN EN ISO 7391-1 | EN-Plastics - Polycarbonate (PC) Moulding and Extursion Materials - Part 1: Designation System and Basis for Specifications-ISO 7391-1:2006 | |
| CEN EN ISO 7391-2 | EN-Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| CEN EN ISO 7438 | EN-Metallic materials Bend test | |
| CEN EN ISO 7441 | EN-Corrosion of Metals and Alloys - Determination of Bimetallic Corrosion in Outdoor Exposure Corrosion Tests (ISO 7441 : 1984) | |
| CEN EN ISO 75-1 | EN-Plastics - Determination of temperature of deflection under load - Part 1: General test method-ISO 75-1:2004 | |
| CEN EN ISO 75-2 | EN-Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite-Incorporating Corrigendum April 2006; ISO 75-2:2004 | |
| CEN EN ISO 75-3 | EN-Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates-ISO 75-3:2004 | |
| CEN EN ISO 7500-1 | EN-Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system-ISO 7500-1:2004 | |
| CEN EN ISO 7500-2 | EN-Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2: Tension Creep Testing Machines - Verification of the Applied Load | |
| CEN EN ISO 7500-2 | EN-Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2: Tension Creep Testing Machines - Verification of the Applied Load-ISO 7500-2: 1996 | |
| CEN EN ISO 7539-1 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 1: General Guidance on Testing Procedures (ISO 7539-1: 1987) | |
| CEN EN ISO 7539-2 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 2: Preparation and Use of Bent-Beam Specimen (ISO 7539-2: 1989) | |
| CEN EN ISO 7539-3 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens (ISO 7539-3: 1989) | |
| CEN EN ISO 7539-4 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 4: Preparation and Use of Uniaxially Loaded Tension Specimens (ISO 7539-4: 1989) | |
| CEN EN ISO 7539-5 | EN-Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens First Edition (ISO 7539-5: 1989) | |
| CEN EN ISO 7539-6 | EN-Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement-ISO 7539-6: 2003 | |
| CEN EN ISO 7539-7 | EN-Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing-ISO 7539-7:2005 | |
| CEN EN ISO 7539-8 | EN-Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments | |
| CEN EN ISO 7539-9 | EN-Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement | |
| CEN EN ISO 7540 | EN-Ground paprika (Capsicum annuum L.) - Specification | |
| CEN EN ISO 7541 | EN-Ground (powdered) paprika - Determination of total natural colouring matter content | |
| CEN EN ISO 7625 | EN-Sintered metal materials excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content | |
| CEN EN ISO 7765-1 | EN-Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods-ISO 7765-1:1988 | |
| CEN EN ISO 7792-2 | EN-Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications-ISO 7792-2:1997 | |
| CEN EN ISO 7799 | EN-Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test-ISO 7799:1985 | |
| CEN EN ISO 7808 | EN-Plastics - Thermosetting moulding materials- Determination of transfer flow | |
| CEN EN ISO 7822 | EN-Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition Mechanical Disintegration and Statistical Counting Methods | |
| CEN EN ISO 7823-1 | EN-Plastics - Poly (methyl methacrylate) sheets - Types dimensions and characteristics - Part 1: Cast Sheets-ISO 7823-1:2003 | |
| CEN EN ISO 7823-2 | EN-Plastics - Poly(Methyl Methacrylate) Sheets - Types Dimensions and Characteristics - Part 2: Extruded Sheets-ISO 7823-2:2003 | |
| CEN EN ISO 7823-3 | EN-Plastics - Poly(methyl methacrylate) sheets - Types dimensions and characteristics - Part 3: Continuous cast sheets | |
| CEN EN ISO 7854 | EN-Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing | |
| CEN EN ISO 7971-1 | EN-Cereals - Determination of bulk density called mass per hectolitre - Part 1: Reference method | |
| CEN EN ISO 7971-2 | EN-Cereals - Determination of bulk density called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument | |
| CEN EN ISO 7971-3 | EN-Cereals - Determination of bulk density called mass per hectolitre - Part 3: Routine method | |
| CEN EN ISO 801-1 | EN-Pulps - Determination of Saleable Mass in Lots - Part 1: Pulp Baled in Sheet Form-ISO 801-1 : 1994 | |
| CEN EN ISO 801-3 | EN-Pulps - Determination of Saleable Mass in Lots - Part 3: Unitized Bales-ISO 801-3 : 1994 | |
| CEN EN ISO 8028 | EN-Rubber and/or Plastics Hoses and Hose Assemblies for Airless Paint Spraying - Specification-ISO 8028:1999; Supersedes EN 28028:1993 | |
| CEN EN ISO 8044 | EN-Corrosion of Metals and Alloys - Basic Terms and Definitions-ISO 8044: 1999 | |
| CEN EN ISO 8067 | EN-Flexible cellular polymeric materials - Determination of tear strength | |
| CEN EN ISO 8069 | EN-Dried milk - Determination of content of lactic acid and lactates | |
| CEN EN ISO 8222 | EN-Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks-ISO 8222:2002 | |
| CEN EN ISO 8254-1 | EN-Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam TAPPI method | |
| CEN EN ISO 8254-2 | EN-Paper and board Measurement of specular gloss Part 2: 75 degrees gloss with a parallel beam DIN method-ISO 8254-2:2003 | |
| CEN EN ISO 8256 | EN-Plastics - Determination of tensile-impact strength-ISO 8256:2004 | |
| CEN EN ISO 8257-1 | EN-Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| CEN EN ISO 8257-2 | EN-Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 8257:2001 | |
| CEN EN ISO 8292 | EN-Animal and Vegetable Fats and Oils - Determination of Solid Fat Content - Pulsed Nuclear Magnetic Resonance Method (ISO 8292 : 1991) | |
| CEN EN ISO 8294 | EN-Animal and Vegetable Fats and Oils - Determination of Copper Iron and Nickel Contents - Graphite Furnace Atomic Absorption Method | |
| CEN EN ISO 8295 | EN-Plastics Film and sheeting Determination of the coefficients of friction-ISO 8295:1995 | |
| CEN EN ISO 8307 | EN-Flexible cellular polymeric materials - Determination of resilience by ball rebound | |
| CEN EN ISO 8311 | EN-Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical Measurement | |
| CEN EN ISO 8381 | EN-Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) | |
| CEN EN ISO 8388 | EN-Knitted fabrics - Types - Vocabulary | |
| CEN EN ISO 8420 | EN-Animal and vegetable fats and oils - Determination of content of polar compounds-ISO 8420:2002 | |
| CEN EN ISO 844 | EN-Rigid cellular plastics - Determination of compression properties | |
| CEN EN ISO 8442-1 | EN-Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 1: Requirements for Cutlery for the Preparation of Food-ISO 8442-1: 1997 | |
| CEN EN ISO 8442-2 | EN-Materials and articles in contact with foodstuffs Cutlery and table holloware Part 2: Requirements for stainless steel and silver-plated cutlery-Incorporates Corrigendum June 1998 and June 2006; ISO 8442-2:1997 | |
| CEN EN ISO 8442-4 | EN-Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 4: Requirements for Gold-Plated Cutlery-ISO 8442-4: 1997 | |
| CEN EN ISO 8442-5 | EN-Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of cutlery-ISO 8442-5:2004 | |
| CEN EN ISO 8442-6 | EN-Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 6: Lightly Silver Plated Table Holloware Protected by Lacquer-ISO 8442-6:2000 | |
| CEN EN ISO 8442-7 | EN-Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 7: Specification for Table Cutlery Made of Silver Other Precious Metals and Their Alloys-ISO 8442-7:2000 | |
| CEN EN ISO 8442-8 | EN-Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 8: Specification for Silver Table and Decorative Holloware-ISO 8442-8:2000 | |
| CEN EN ISO 845 | EN-Cellular plastics and rubbers - Determination of apparent density | |
| CEN EN ISO 846 | EN-Plastics - Evaluation of the Action of Microorganisms-ISO 846: 1997 |