EUROFILE - Process and Manufacturing Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN ISO 14692-2 | EN-Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture-Incorporating Corrigendum March 2006; ISO 14692-2:2002 | |
| CEN EN ISO 14692-3 | EN-Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design-Incorporating Corrigendum March 2006; ISO 14692-3: 2002 | |
| CEN EN ISO 14692-4 | EN-Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication installation and operation-Incorporating corrigendum July 2007 | |
| CEN EN ISO 14693 | EN-Petroleum and natural gas industries - Drilling and well-servicing equipment-ISO 14693:2003 | |
| CEN EN ISO 14723 | EN-Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves | |
| CEN EN ISO 148-2 | EN-Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines | |
| CEN EN ISO 148-3 | EN-Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | |
| CEN EN ISO 14851 | EN-Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer-ISO 14851:1999 | |
| CEN EN ISO 14852 | EN-Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide | |
| CEN EN ISO 14855-1 | EN-Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method | |
| CEN EN ISO 14855-2 | EN-Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide ev | |
| CEN EN ISO 14891 | EN-Milk and Milk Products - Determination of Nitrogen Content - Routine Method Using Combustion According to the Dumas Principle-ISO 14891:2002 | |
| CEN EN ISO 14896 | EN-Plastics - Polyurethane raw materials - Determination of isocyanate content | |
| CEN EN ISO 14910-1 | EN-Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications | |
| CEN EN ISO 14910-2 | EN-Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties | |
| CEN EN ISO 14912 | EN-Gas analysis - Conversion of gas mixture composition data | |
| CEN EN ISO 14931 | EN-Leather - Guide to the selection of leather for apparel (excluding furs)-ISO 14931:2004 | |
| CEN EN ISO 14935 | EN-Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids-Corrected 1998-11-12; ISO 14935:1998 | |
| CEN EN ISO 15013 | EN-Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods | |
| CEN EN ISO 15015 | EN-Plastics - Extruded sheets of impact-modified acrylonitrilestyrene copolymers (ABS AEPDS and ASA) - Requirements and test methods | |
| CEN EN ISO 15023-1 | EN-Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications-ISO 15023-1: 2001 | |
| CEN EN ISO 15023-2 | EN-Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties-ISO 15023-2:2003 | |
| CEN EN ISO 15029-1 | EN-Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame Persistence - Hollow-Cone Nozzle Method-ISO 15029-1:1999 | |
| CEN EN ISO 15103-2 | EN-Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| CEN EN ISO 15106-1 | EN-Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method-ISO 15106-1:2003 | |
| CEN EN ISO 15106-2 | EN-Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method-ISO 15106-2:2003 | |
| CEN EN ISO 15106-3 | EN-Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method-ISO 15106-3:2003 | |
| CEN EN ISO 15136-1 | EN-Downhole Equipment for Petroleum and Natural Gas Industries - Progressing Cavity Pump Systems for Artificial Lift - Part 1: Pumps-ISO 15136-1:2001 | |
| CEN EN ISO 15136-2 | EN-Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 2: Surface-drive systems-ISO 15136-2:2006 | |
| CEN EN ISO 15138 | EN-Petroleum and natural gas industries - Offshore production installations - Heating ventilation and air-conditioning | |
| CEN EN ISO 15141-1 | EN-Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic Method with Silica Gel Clean up-ISO 15141-1:1998 | |
| CEN EN ISO 15141-2 | EN-Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 2: High Performance Liquid Chromatographic Method with Bicarbonate Clean up-ISO 15141-2:1998 | |
| CEN EN ISO 15156-1 | EN-Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials | |
| CEN EN ISO 15156-2 | EN-Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels and the use of cast irons | |
| CEN EN ISO 15156-3 | EN-Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | |
| CEN EN ISO 1523 | EN-Determination of Flash Point - Closed Cup Equilibrium Method-ISO 1523:2002 | |
| CEN EN ISO 15252-1 | EN-Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications-ISO 15252-1: 1999 | |
| CEN EN ISO 15252-2 | EN-Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 15252-2: 1999 | |
| CEN EN ISO 15252-3 | EN-Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds-ISO 15252-3: 1999 | |
| CEN EN ISO 15301 | EN-Animal and Vegetable Fats and Oils - Determination of Sediment in Crude Fats and Oils - Centrifuge Method-Incorporating corrigendum June 2007 | |
| CEN EN ISO 15302 | EN-Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method | |
| CEN EN ISO 15303 | EN-Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS | |
| CEN EN ISO 15304 | EN-Animal and Vegetable Fats and Oils - Determination of the Content of Trans Fatty Acid Isomers of Vegetable Fats and Oils - Gas Chromatographic Method-ISO 15304:2002 | |
| CEN EN ISO 15310 | EN-Fibre-reinforced plastic composites - Determination of the inplane shear modulus by the plate twist method-ISO 15310:1999 | |
| CEN EN ISO 15318 | EN-Pulp Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB) | |
| CEN EN ISO 15320 | EN-Pulp paper and board - Determination of pentachlorophenol in an aqueous extract-ISO 15320:2003 | |
| CEN EN ISO 15324 | EN-Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test | |
| CEN EN ISO 15329 | EN-Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys | |
| CEN EN ISO 15349-2 | EN-Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)-ISO 15349-2:1999 | |
| CEN EN ISO 15350 | EN-Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) | |
| CEN EN ISO 15351 | EN-Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) | |
| CEN EN ISO 15403-1 | EN-Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality | |
| CEN EN ISO 15463 | EN-Petroleum and natural gas industries - Field inspection of new casing tubing and plain-end drill pipe | |
| CEN EN ISO 15487 | EN-Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying | |
| CEN EN ISO 15496 | EN-Textiles Measurement of water vapour permeability of textiles for the purpose of quality control-ISO 15496:2004 | |
| CEN EN ISO 15512 | EN-Plastics - Determination of water content | |
| CEN EN ISO 15526-1 | EN-Plastics Polyketone (PK) moulding and extrusion materials Part 1: Designation system and basis for specifications-ISO 15526-1:2000 | |
| CEN EN ISO 15526-2 | EN-Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 15526-2:2000 | |
| CEN EN ISO 15540 | EN-Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods-ISO 15540:1999 | |
| CEN EN ISO 15541 | EN-Ships and Marine Technology - Fire Resistance of Hose Assemblies - Requirements for the Test Bench-ISO 15541:1999 | |
| CEN EN ISO 15544 | EN-Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response | |
| CEN EN ISO 15546 | EN-Petroleum and natural gas industries Aluminium alloy drill pipe | |
| CEN EN ISO 15547-1 | EN-Petroleum petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers-ISO 15547-1: 2005; Supersedes EN ISO 15547: 2001 | |
| CEN EN ISO 15547-2 | EN-Petroleum petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers-(ISO 15547-2):2005;:2001 | |
| CEN EN ISO 15605 | EN-Adhesives - Sampling-ISO 15605:2000; Supersedes EN 1066:1997 | |
| CEN EN ISO 15630-1 | EN-Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 1: Reinforcing Bars Wire Rod and Wire-ISO 15630-1: 2002; Supersedes ENV 10080: 1995 | |
| CEN EN ISO 15630-2 | EN-Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 2: Welded Fabric-ISO 15630-2:2002; Supersedes ENV 10080:1995 | |
| CEN EN ISO 15630-3 | EN-Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel-ISO 15630-3: 2002 | |
| CEN EN ISO 15663-1 | EN-Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology | |
| CEN EN ISO 15700 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting-ISO 15700:1998 | |
| CEN EN ISO 15701 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Migration Into Plasticized Poly(Vinyl Chloride)-ISO 15701:1998 | |
| CEN EN ISO 15702 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Machine Washing-ISO 15702: 1998 | |
| CEN EN ISO 15703 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing-ISO 15703:1998 | |
| CEN EN ISO 15732 | EN-Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method-ISO 15732:2003 | |
| CEN EN ISO 15753 | EN-Animal and vegetable fats and oils Determination of polycyclic aromatic hydrocarbons-ISO 15753:2003 | |
| CEN EN ISO 15755 | EN-Paper and Board - Estimation of Contraries-ISO 15755:1999 | |
| CEN EN ISO 15761 | EN-Steel gate globe and check valves for sizes DN 100 and smaller for the petroleum and natural gas industries-ISO 15761: 2002 | |
| CEN EN ISO 15774 | EN-Animal and Vegetable Fats and Oils - Determination of Cadmium Content by Direct Graphite Furnace Atomic Absorption Spectrometry | |
| CEN EN ISO 15788-1 | EN-Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 1: Method Using Capillary-Column Gas Chromatography (Reference Method) |