EUROFILE - Process and Manufacturing Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN ISO 11378-2 | EN-Textile Floor Coverings - Laboratory Soiling Tests - Part 2: Drum Test-ISO 11378-2:2001 | |
| CEN EN ISO 1140 | EN-Fibre ropes - Polyamide - 3- 4- and 8-strand ropes-ISO 1140:2004; Supersedes EN 696:1995 | |
| CEN EN ISO 11401 | EN-Plastics - Phenolic Resins - Separation by Liquid Chromatography-ISO 11401:1993 | |
| CEN EN ISO 11402 | EN-Plastics - Condensation Resins - Determination of Free Formaldehyde-ISO 11402:1993; Supersedes EN ISO 9397:1997 and EN ISO 9020:1998 | |
| CEN EN ISO 11403-1 | EN-Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties-ISO 11403-1:2001 | |
| CEN EN ISO 11403-2 | EN-Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties-ISO 11403-2:2004 | |
| CEN EN ISO 11403-3 | EN-Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences of Properties-ISO 11403-3:1999 | |
| CEN EN ISO 11409 | EN-Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry-ISO 11409:1993 | |
| CEN EN ISO 1141 | EN-Fibre ropes - Polyester - 3- 4- and 8-strand ropes-ISO 1141:2004; Supersedes EN 697:1995 | |
| CEN EN ISO 11463 | EN-Corrosion of metals and alloys - Evaluation of pitting corrosion | |
| CEN EN ISO 11468 | EN-Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method | |
| CEN EN ISO 11469 | EN-Plastics - Generic Identification and Marking of Plastics Products-ISO 11469:2000 | |
| CEN EN ISO 11501 | EN-Plastics Film and sheeting Determination of dimensional change on heating-ISO 11501:1995 | |
| CEN EN ISO 11502 | EN-Plastics - Film and sheeting - Determination of blocking resistance-ISO 11502:1995 | |
| CEN EN ISO 11541 | EN-Natural gas - Determination of water content at high pressure | |
| CEN EN ISO 11542-1 | EN-Plastics - Ultra-High-Molecular-Weight Polythylene (PE-UHMW) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-ISO 11542-1: 2001 | |
| CEN EN ISO 11542-2 | EN-Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 11542-2:1998 | |
| CEN EN ISO 11543 | EN-Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry-ISO 11543: 2000 | |
| CEN EN ISO 1158 | EN-Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content-ISO 1158:1998 | |
| CEN EN ISO 1163-1 | EN-Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-ISO 1163-1:1995 | |
| CEN EN ISO 1163-2 | EN-Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties | |
| CEN EN ISO 11640 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing-ISO 11640:1993 | |
| CEN EN ISO 11641 | EN-Leather - Tests for colour fastness - Colour fastness to perspiration | |
| CEN EN ISO 11642 | EN-Leather - Tests for Colour Fastness - Colour Fastness to Water-ISO 11642: 1993 | |
| CEN EN ISO 11643 | EN-Leather - Tests for colour fastness - Colour fastness of small samples to solvents | |
| CEN EN ISO 11644 | EN-Leather - Test for adhesion of finish | |
| CEN EN ISO 11646 | EN-Leather - Measurement of Area-ISO 11646:1993 | |
| CEN EN ISO 11667 | EN-Fibre Reinforced Plastics - Mouldings Compounds and Prepregs - Determination of Resin Reinforcement-Fibre and Mineral-Filler Content - Dissolution Methods | |
| CEN EN ISO 11701 | EN-Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector | |
| CEN EN ISO 11702 | EN-Animal and vegetable fats and oils - Enzymatic determination of total sterols content | |
| CEN EN ISO 1172 | EN-Textile-glass-reinforced plastics - Prepregs moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods | |
| CEN EN ISO 11721-1 | EN-Textiles - Determination of the Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of Rot-Retardant Finishing-ISO 11721-1: 2001 | |
| CEN EN ISO 11721-2 | EN-Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish-ISO 11721:2003 | |
| CEN EN ISO 11782-1 | EN-Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing | |
| CEN EN ISO 11782-2 | EN-Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens | |
| CEN EN ISO 1181 | EN-Fibre ropes - Manila and sisal - 3- 4- and 8-strand ropes-ISO 1181:2004; Supersedes EN 698:1995 | |
| CEN EN ISO 11816-1 | EN-Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks-ISO 11816-1:2006 | |
| CEN EN ISO 11816-2 | EN-Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese-ISO 11816-2:2003 | |
| CEN EN ISO 1183-1 | EN-Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method liquid pyknometer method and titration method-ISO 1183-1:2004 | |
| CEN EN ISO 1183-2 | EN-Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method-ISO 1183-2:2004 | |
| CEN EN ISO 1183-3 | EN-Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method-ISO 1183-3:1999 | |
| CEN EN ISO 11833-1 | EN-Plastics - Unplasticized poly(vinyl chloride) sheets - Types dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm | |
| CEN EN ISO 11833-2 | EN-Plastics - Unplasticized poly(vinyl chloride) sheets - Types dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm | |
| CEN EN ISO 11844-1 | EN-Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity | |
| CEN EN ISO 11844-2 | EN-Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres | |
| CEN EN ISO 11844-3 | EN-Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity | |
| CEN EN ISO 11846 | EN-Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys | |
| CEN EN ISO 11857 | EN-Textile Floor Coverings - Determination of Resistance to Delamination-ISO 11857: 1999 | |
| CEN EN ISO 119 | EN-Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method | |
| CEN EN ISO 11960 | EN-Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells-Incorporating corrigendum July 2007 | |
| CEN EN ISO 11961 | EN-Petroleum and natural gas industries - Steel drill pipe | |
| CEN EN ISO 11963 | EN-Plastics - Polycarbonate Sheets - Types Dimensions and Characteristics (ISO 11963 : 1995) | |
| CEN EN ISO 11970 | EN-Specification and approval of welding procedures for production welding of steel castings | |
| CEN EN ISO 120 | EN-Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method | |
| CEN EN ISO 12004-1 | EN-Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 1: Measurement and application of forminglimit diagrams in the press shop | |
| CEN EN ISO 12004-2 | EN-Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory | |
| CEN EN ISO 12017 | EN-Plastics - Poly(Methyl Methacrylate) Double- and Triple-Skin Sheets - Test Methods-ISO 12017: 1995 | |
| CEN EN ISO 12058-1 | EN-Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method | |
| CEN EN ISO 12086-1 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications-Incorporates Corrigendum: 11/2007 | |
| CEN EN ISO 12086-2 | EN-Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 12086-2:2006 | |
| CEN EN ISO 1211 | EN-Milk - Determination of fat content - Gravimetric method (Reference method) | |
| CEN EN ISO 12114 | EN-Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics-ISO 12114: 1997 | |
| CEN EN ISO 12115 | EN-Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability Maturation and Shelf Life-ISO 12115: 1997 | |
| CEN EN ISO 12156-1 | EN-Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method-ISO 12156-1:2006 | |
| CEN EN ISO 12193 | EN-Animal and vegetable fats and oils - Determination of lead by direct graphite furnace atomic absorption spectroscopy-ISO 12193: 2004 | |
| CEN EN ISO 12213-1 | EN-Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines | |
| CEN EN ISO 12213-2 | EN-Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis | |
| CEN EN ISO 12213-3 | EN-Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties | |
| CEN EN ISO 12228 | EN-Animal and Vegetable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method-ISO 12228:1999 | |
| CEN EN ISO 12236 | EN-Geosynthetics - Static puncture test (CBR test)-ISO 12236:2006 | |
| CEN EN ISO 12543-1 | EN-Glass in Building - Laminated Glass and Laminated Safety Glass- Part 1: Definitions and Description of Component Parts-ISO 12543-1:1998 | |
| CEN EN ISO 12543-2 | EN-Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass-ISO 12543-2:1998 | |
| CEN EN ISO 12543-3 | EN-Glass in Building - Laminated Glass and Laminated Safety Glass - Part 3: Laminated Glass-ISO 12543-3:1998 | |
| CEN EN ISO 12543-4 | EN-Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability-ISO 12543-4:1998 | |
| CEN EN ISO 12543-5 | EN-Glass in Building - Laminated Glass and Laminated Safety Glass - Part 5: Dimensions and Edge Finishing-ISO 12543-5:1998 | |
| CEN EN ISO 12543-6 | EN-Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance-ISO 12543-6:1998 | |
| CEN EN ISO 12625-1 | EN-Tissue paper and tissue products - Part 1: General guidance on terms | |
| CEN EN ISO 12625-12 | EN-Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency | |
| CEN EN ISO 12625-3 | EN-Tissue paper and tissue products - Part 3: Determination of thickness bulking thickness and apparent bulk density-Supersedes EN 12625-3:1999; ISO 12625-3:2005 |