EUROFILE - Process and Manufacturing Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 61 | EN-Glass reinforced plastics. Determination of tensile properties | |
| CEN EN 610 | EN-Tin and Tin Alloys - Ingot Tin | |
| CENELEC EN 61010-1 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 1: General requirements (IEC 61010-1:2001)-Incorporating Corrigendum June 2002; IEC 61010-1:2001 | |
| CENELEC EN 61010-2-010 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material-IEC 61010-2-010:2003; Supersedes EN 6 | |
| CENELEC EN 61010-2-020 | EN-Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges | |
| CENELEC EN 61010-2-040 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials-(IEC 61010-2-040):2 | |
| CENELEC EN 61010-2-051 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring-IEC 61010-2-051:2003 | |
| CENELEC EN 61010-2-061 | EN-Safety requirements for electrical equipment for measurement control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization-IEC 61010-2-06 | |
| CENELEC EN 61010-2-081 | EN-Safety requirements for electrical equipment for measurement control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Saf | |
| CEN EN 611-1 | EN-Tin and Tin Alloys - Pewter and Pewterware - Part 1: Pewter | |
| CEN EN 611-2 | EN-Tin and Tin Alloys - Pewter and Pewterware - Part 2: Pewterware | |
| CENELEC EN 61207-1 | EN-Expression of Performance of Gas Analyzers Part 1: General (IEC 1207-1 : 1994) | |
| CENELEC EN 61207-2 | EN-Expression of Performance of Gas Analyzers Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical Sensors) (IEC 1207-2 : 1994) | |
| CENELEC EN 61207-3 | EN-Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers-IEC 61207-3:2002 | |
| CENELEC EN 61207-6 | EN-Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers (IEC 1207-6:1994) | |
| CENELEC EN 61221 | EN-Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications-IEC 61221:2004 | |
| CENELEC EN 61340-4-1 | EN-Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors-IEC 61340-4-1:2003 | |
| CENELEC EN 61340-4-3 | EN-Electrostatics Part 4-3: Standard Test Methods for Specific Applications - Footwear-IEC 61340-4-3: 2001 | |
| CENELEC EN 61340-4-5 | EN-Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person-IEC 61340-4-5: 2004 | |
| CENELEC EN 61788-6 | EN-Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors | |
| CEN EN 62 | EN-Glass Reinforced Plastics: Standard Atmospheres for Conditioning and Testing | |
| CEN EN 622-1 | EN-Fibreboards - Specifications - Part 1: General Requirements | |
| CEN EN 622-2 | EN-Fibreboards - Specifications - Part 2: Requirements for hardboards-Incorporating Corrigendum: 12/2005 | |
| CEN EN 622-3 | EN-Fibreboards - Specifications - Part 3: Requirements for medium boards | |
| CEN EN 622-4 | EN-Fibreboards - Specifications - Part 4: Requirements for softboards | |
| CEN EN 622-5 | EN-Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) | |
| CEN EN 623-1 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 1: Determination of the Presence of Defects by Dye Penetration | |
| CEN EN 623-2 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 2: Determination of Density and Porosity | |
| CEN EN 623-3 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)-Supersedes ENV 623-3:1993 | |
| CEN EN 623-4 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness-Supersedes ENV 623-4:1993 | |
| CEN EN 623-5 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs | |
| CEN EN 63 | EN-Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method | |
| CEN EN 631-1 | EN-Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 1: Dimensions of Containers | |
| CEN EN 631-2 | EN-Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 2: Dimensions of Accessories and Supports | |
| CEN EN 633 | EN-Cement-Bonded Particleboards - Definition and Classification | |
| CEN EN 634-1 | EN-Cement-Bonded Particleboards - Specification - Part 1: General Requirements | |
| CEN EN 634-2 | EN-Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry humid and external conditions | |
| CEN EN 635-1 | EN-Plywood - Classification by Surface Appearance - Part 1: General | |
| CEN EN 635-2 | EN-Plywood - Classification by Surface Appearance - Part 2: Hardwood | |
| CEN EN 635-3 | EN-Plywood - Classification by Surface Appearance - Part 3: Softwood | |
| CEN EN 635-5 | EN-Plywood - Classification by Surface Appearance - Part 5: Methods for Measuring and Expressing Characteristics and Defects | |
| CEN EN 636 | EN-Plywood Specifications-Supersedes EN 636-1: 1996; EN 636-2: 1996 and EN 636-3: 1996 | |
| CEN EN 643 | EN-Paper and Board - European List of Standard Grades of Recovered Paper and Board | |
| CEN EN 645 | EN-Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Cold Water Extract | |
| CEN EN 646 | EN-Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Colour Fastness of Dyed Paper and Board | |
| CEN EN 647 | EN-Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Hot Water Extract | |
| CEN EN 648 | EN-Paper and board intended to come into contact with foodstuffs Determination of the fastness of fluorescent whitened paper and board | |
| CEN EN 648 | EN-Paper and board intended to come into contact with foodstuffs Determination of the fastness of fluorescent whitened paper and board | |
| CEN EN 658-1 | EN-Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 1: Determination of Tensile Properties-Supersedes ENV 658-1:1993 | |
| CEN EN 658-2 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties-Supersedes ENV 658-2: 1993 | |
| CEN EN 658-3 | EN-Advanced Technical Ceramics Mechanical Properties of Ceramic Composites at Room Temperature Part 3: Determination of Flexural Strength-Supersedes ENV 658-3: 1992 | |
| CEN EN 658-4 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens-Supersedes ENV 658 | |
| CEN EN 658-5 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)-Supersedes ENV 658-5:1993 | |
| CEN EN 673 | EN-Glass in building - Determination of thermal transmittance (U value) - Calculation method-Includes Amendment A1:2000 and A2:2002 | |
| CEN EN 674 | EN-Glass in Building - Determination of Thermal Transmittance (U Value) - Guarded Hot Plate Method | |
| CEN EN 675 | EN-Glass in Building - Determination of Thermal Transmittance (U Value) - Heat Flow Meter Method | |
| CEN EN 681-1 | EN-Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber-Includes Amendments A1:1998 and A2:2002; Incorporating Corrigendum August 2002; Include | |
| CEN EN 682 | EN-Elastomeric Seals - Materials Requirements for Seals Used in Pipes an Fittings Carrying Gas and Hydrocarbon Fluids-Includes Amendment A1: August 2005 | |
| CEN EN 683-1 | EN-Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery | |
| CEN EN 683-1 | EN-Aluminium and Aluminium Alloys - Finstock - Part 1. Technical Conditions for Inspection and Delivery | |
| CEN EN 683-2 | EN-Aluminium and Aluminium Alloys - Finstock - Part 2: Mechanical Properties | |
| CEN EN 683-3 | EN-Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form | |
| CEN EN 685 | EN-Resilient textile and laminate floor coverings - Classification | |
| CEN EN 71-5 | EN-Safety of toys Part 5: Chemical toys (sets) other than experimental sets-Incorporates Amendment A2: 2009 | |
| CEN EN 717-1 | EN-Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method-Supersedes ENV 717-1:1998 | |
| CEN EN 717-2 | EN-Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method-Incorporating Corrigendum July 2002 | |
| CEN EN 717-3 | EN-Wood-Based Panels - Determination of Formaldehyde Release - Part 3: Formaldehyde Release by the Flask Method | |
| CEN EN 720-1 | EN-Transportable Gas Cylinders - Gases and Gas Mixtures - Part 1: Properties of Pure Gases | |
| CEN EN 723 | EN-Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings | |
| CEN EN 725-1 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 1: Determination of Impurities in Alumina | |
| CEN EN 725-10 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 10: Determination of Compaction Properties | |
| CEN EN 725-11 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering-:1993 | |
| CEN EN 725-12 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia | |
| CEN EN 725-2 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate | |
| CEN EN 725-3 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas | |
| CEN EN 725-4 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis-:1994 | |
| CEN EN 725-5 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 5: Determination of the Particle Size Distribution-Incorporating Corrigendum: August 2007 | |
| CEN EN 725-8 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density | |
| CEN EN 725-9 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |