EUROFILE - Electronics Telecommunications IT Transportation Aerospace - Historical Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 4179 | EN-Aerospace Series - Qualification and Approval of Personnel for Non-Destructive Testing | |
| CEN EN 4179 | EN-Aerospace Series - Qualification and Approval of Personnel for Non-Destructive Testing | |
| CEN EN 4234 | EN-Aerospace series - Clamps worm drive - Dimensions masses | |
| CEN EN 4321 | EN-Aerospace series - Bolts double hexagon head with lockwire holes relieved shank long thread in heat resisting nickelbase alloy NI-PH2601 (Inconel 718) silver plated Classification: 1 550 MPa (at ambient tempera | |
| CEN EN 4322 | EN-Aerospace series - Bolts double hexagon head with lockwire holes relieved shank long thread in titanium alloy TI-P64001 anodized MoS2 coated - Strength class:100 MPa (at ambient temperature) | |
| CEN EN 4323 | EN-Aerospace series - Screws 100° countersunk head six lobe recess threaded to head in titanium alloy TI-P64001 anodized MoS2 coated - Classification: 900 MPa (at ambient temperature)/350 °C | |
| CEN EN 4352 | EN-Aerospace series - Bolts double hexagon head with lockwire holes relieved shank long thread in heat resisting nickel base alloy NI-PH 2601 (Inconel 718) MoS2 coated Classification: 1 550 MPa (at ambient tempera | |
| CEN EN 441-1 | EN-Refrigerated Display Cabinets - Part 1: Terms and Definitions-Includes Amendment Al : 1995; Superseded by EN ISO 23953-1: 2005 | |
| CEN EN 441-10 | EN-Refrigerated Display Cabinets - Part 10: Test for Absence of Odour and Taste-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-11 | EN-Refrigerated Display Cabinets - Part 11. Installation Maintenance and User's Guide-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-12 | EN-Refrigerated Display Cabinets - Part 12: Measurement of the Heat Extraction Rate of the Cabinets when the Condensing Unit is Remote from the Cabinet-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-2 | EN-Refrigerated Display Cabinets - Part 2: General Mechanical and Physical Requirements-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-3 | EN-Refrigerated Display Cabinets - Part 3: Linear Dimensions Areas and Volumes-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-4 | EN-Refrigerated Display Cabinets - Part 4: General Test Conditions-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-5 | EN-Refrigerated Display Cabinets - Part 5: Temperature Test-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-6 | EN-Refrigerated Display Cabinets - Part 6: Classification According to Temperature-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-7 | EN-Refrigerated Display Cabinets - Part 7: Defrosting Test-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-8 | EN-Refrigerated Display Cabinets - Part 8: Water Vapour Condensation Test-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 441-9 | EN-Refrigerated Display Cabinets - Part 9: Electrical Energy Consumption Test-Superseded by EN ISO 23953-2: 10/2005 | |
| CEN EN 4496 | EN-Aerospace series - Screws 100° countersunk normal head offset cruciform recess close tolerance normal shank short thread in titanium alloy anodized with aluminium pigmented coating - Classification: 1 100 MPa | |
| CEN EN 4604-001 | EN-Aerospace series Cable electrical for signal transmission Part 001: Technical specification | |
| CEN EN 4604-002 | EN-Aerospace series Cable electrical for signal transmission Part 002: General | |
| CEN EN 474-1 | EN-Earth-Moving Machinery - Safety - Part 1: General Requirements | |
| CEN EN 474-1 | EN-Earth-Moving Machinery - Safety - Part 1: General Requirements-Incorporates Corrigendum February 1995; Includes Amendment A1: 1998 | |
| CEN EN 474-1 | EN-Earth-Moving Machinery - Safety - Part 1: General Requirements (Includes Corrigendum: 1995) | |
| CEN EN 474-1 | EN-Earth-Moving Machinery - Safety - Part 1: General Requirements | |
| CEN EN 474-10 | EN-Earth-Moving Machinery - Safety - Part 10: Requirements for Trenchers | |
| CEN EN 474-11 | EN-Earth-Moving Machinery - Safety - Part 11: Requirements for Earth and Landfill Compactors-Ratified European Text | |
| CEN EN 474-11 | EN-Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors | |
| CEN EN 474-12 | EN-Earth-Moving Machinery - Safety - Part 12: Requirements for Cable Excavators | |
| CEN EN 474-2 | EN-Earth-Moving Machinery - Safety - Part 2: Requirements for Tractor-Dozers | |
| CEN EN 474-3 | EN-Earth-moving machinery - Safety - Part 3: Requirements for loaders | |
| CEN EN 474-3 | EN-Earth-Moving Machinery - Part 3: Requirements for Loaders | |
| CEN EN 474-4 | EN-Earth-Moving Machinery - Safety - Part 4: Requirements for Backhoe Loaders | |
| CEN EN 474-4 | EN-Earth-Moving Machinery - Safety - Part 4: Requirements for Backhoe Loaders | |
| CEN EN 474-5 | EN-Earth-Moving Machinery - Safety - Part 5: Requirements for Hydraulic Excavators-Incorporates Corrigendum March 1997 | |
| CEN EN 474-5 | EN-Earth-Moving Machinery - Safety - Part 5: Requirements for Hydraulic Excavators | |
| CEN EN 474-5 | EN-Earth-Moving Machinery - Safety - Part 5: Requirements for Hydraulic Excavators | |
| CEN EN 474-6 | EN-Earth-Moving Machinery - Safety - Part 6: Requirements for Dumpers | |
| CEN EN 474-6 | EN-Earth-Moving Machinery - Safety - Part 6: Requirements for Dumpers | |
| CEN EN 474-6 | EN-Earth-Moving Machinery - Safety - Part 6: Requirements for Dumpers-Incorporates Corrigendum October 1996 | |
| CEN EN 474-7 | EN-Earth-moving machinery - Safety - Part 7: Requirements for scrapers | |
| CEN EN 474-7 | EN-Earth-Moving Machinery - Safety - Part 7: Requirements for Scrapers | |
| CEN EN 474-8 | EN-Earth-Moving Machinery - Safety - Part 8: Requirements for Graders | |
| CEN EN 474-8 | EN-Earth-Moving Machinery - Safety - Part 8: Requirements for Graders | |
| CEN EN 474-9 | EN-Earth-Moving Machinery - Safety - Part 9: Requirements for Pipelayers | |
| CEN EN 499 | EN-Welding Consumables - Covered Electrodes for Manual Metal Arc Welding Non Alloy and Fine Grain Steels - Classification-Superseded by EN ISO 2560 | |
| CENELEC EN 50065-1 | EN-Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 1485 kHz Part 1: General Requirements Frequency Bands and Electromagnetic Disturbances | |
| CENELEC EN 50065-1 | EN-Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 1485 kHz - Part 1: General Requirements Frequency Bands and Electromagnetic Disturbances-Includes Amendments A1: 1993 A2: 1995 and | |
| CENELEC EN 50065-1 | EN-Signalling on Low - Voltage Electrical Installations in the Frequency Range 3/kHz to 148.5 kHz Part 1: General Requirements Frequency Bands and Electromagnetic Disturbances | |
| CENELEC EN 50065-1 | EN-Signalling on Low-Voltage Electrical Installations in the Frequency 3 kHz to 1485 kHz Part 1: General Requirements Frequency Bands and Electromagnetic Disturbances-Includes AMD A1: 1993 AMD A2: 1995 | |
| CENELEC EN 50065-1/ A1 | EN-AMD 1 Signalling on Low- Voltage Electrical Installations in the Frequency Range 3 khz to 148.5 khz Part 1: General Requirements Frequency Bands and Electromagnetic Disturbances | |
| CENELEC EN 50065-2-1 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz | |
| CENELEC EN 50065-2-1 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz | |
| CENELEC EN 50065-2-2 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz | |
| CENELEC EN 50065-2-2 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz | |
| CENELEC EN 50065-2-3 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz | |
| CENELEC EN 50065-4-2 | EN-Signalling on low voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 4-2: Low voltage decoupling filters - Safety requirements-Includes amendment A1: 2003 | |
| CENELEC EN 50065-4-2/A1 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 4-2: Low voltage decoupling filters - Safety requirements-Ratified European Text | |
| CENELEC EN 50065-4-7 | EN-Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 1485 kHz and 16 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements | |
| CENELEC EN 50067 | EN-Specification of the Radio Data System (RDS) | |
| CENELEC EN 50067 | EN-Specification of the Radio Data System (RDS) for VHF/FM Sound Broadcasting in the Frequency Range from 875 to 108 MHz-Superseded by EN 62106:2001 | |
| CENELEC EN 50067 | EN-Specification of the Radio Data System (RDS) | |
| CENELEC EN 50081-1 | EN-Electromagnetic Compatibility - Generic Emission Standard Part 1: Residential Commercial and Light Industry | |
| CENELEC EN 50081-2 | EN-Electromagnetic Compatibility - Generic Emission Standard Part 2: Industrial Environment | |
| CENELEC EN 50082-1 | EN-Electromagnetic Compatibility Generic Immunity Standard Part 1: Residential Commercial and Light Industry | |
| CENELEC EN 50082-1 | EN-Electromagnetic Compatibility - Generic Immunity Standard Part 1: Residential Commercial and Light Industry (AS/NZS 4252.1: 1994) | |
| CENELEC EN 50082-1 | EN-CORRIGENDUM Electromagnetic Compatibility - Generic Immunity Standard Part 1: Residential Commercial and Light Industry | |
| CENELEC EN 50082-1 | EN-Electromagnetic Compatibility - Generic Immunity Standard Part 1: Residential Commercial and Light Industry-: 2001 | |
| CENELEC EN 50082-2 | EN-Electromagnetic Compatibility Generic Immunity Standard Part 2: Industrial Environment-Superseded by EN 61000-6-2:1999 | |
| CENELEC EN 50083-1 | EN-Cabled Distribution Systems for Television Sound and Interactive Multimedia Signals Part 1: Safety Requirements-Includes Amendment A1: 1997 | |
| CENELEC EN 50083-1 | EN-Cabled Distribution Systems for Television and Sound Signals Part 1: Safety Requirements | |
| CENELEC EN 50083-1 | EN-Cabled Distribution Systems for Television Sound and Interactive Multimedia Signals Part 1: Safety Requirements-Includes Amendments A1: 1997 and A2: 1997 | |
| CENELEC EN 50083-10 | EN-Cabled Networks for Television Signals Sound Signals and Interactive Services Part 10: System Performance for Return Paths | |
| CENELEC EN 50083-2 | EN-Cable Networks for Television Signals Sound Signals and Interactive Services - Part 2: Electromagnetic Compatibility for Equipment-Includes Amendment A1:2005; Incorporating Corrigendum January 2002 | |
| CENELEC EN 50083-2 | EN-Cable Networks for Television Signals Sound Signals and Interactive Services - Part 2: Electromagnetic Compatibility for Equipment-Includes Amendment A1:2005; Incorporating Corrigendum January 2002 | |
| CENELEC EN 50083-2 | EN-Cabled Distribution Systems for Television and Sound Signals Part 2. Electromagnetic Compatibility for Equipment | |
| CENELEC EN 50083-2 A1 | EN-Cabled Distribution Systems for Television Sound and Interactive Multimedia Signals Part 2: Electromagnetic Compatibility for Equipment-Includes Amendment A1: 1997 | |
| CENELEC EN 50083-2/CORR | EN-Cable Networks for Television Signals Sound Signals and Interactive Services Part 2: Electromagnetic Compatibility for Equipment-Ratified European Text; Amendment 1:1997; Corrigendum: 7/2000 |