EUROFILE - Electronics Telecommunications IT Transportation Aerospace - Historical Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 3155-009 | EN-Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts electrical female type A crimp class S - Product standard | |
| CEN EN 3264 | EN-Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Thrust Wire Nut | |
| CEN EN 3274 | EN-Aerospace Series - Pipe Coupling 8 Degrees 30´ - Thread - Geometric Configuration | |
| CEN EN 3298 | EN-Aerospace Series - Inserts Thin Wall Self-Locking Installation and Removal Procedure | |
| CEN EN 334 | EN-Gas Pressure Regulators for Inlet Pressures up to 100 Bar | |
| CEN EN 3475-302 | EN-Aerospace Series - Cables Electrical Aircraft use - Test Methods - Part 302: Voltage Proof Test | |
| CEN EN 3475-407 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 407: Flammability | |
| CEN EN 3475-407 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 407: Flammability | |
| CEN EN 3475-501 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 501: Dynamic Out-Through | |
| CEN EN 3475-505 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 505: Tensile Test on Conductors and Strands | |
| CEN EN 3475-506 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 506: Plating Continuity | |
| CEN EN 3475-507 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 507: Adherence of Plating | |
| CEN EN 3475-704 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 704: Flexibility | |
| CEN EN 3475-705 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 705: Contrast Measurement | |
| CEN EN 3475-802 | EN-Aerospace Series - Cables Electrical Aircraft Use - Test Methods - Part 802: Capacitance Unbalanced | |
| CEN EN 3545-001 | EN-Areospace series - Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures -55 degrees C to 175 degrees C - Part 001: Technical specification | |
| CEN EN 3545-002 | EN-Aerospace series - Connectors electrical rectangular with sealed and non-sealed rear plastic housing locking device operating temperatures -55 degrees C to 175 degrees C - Part 002: Specification of performance | |
| CEN EN 3660-003 | EN-Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut style A for EN 2997 and EN 4067 - Product standard | |
| CEN EN 3660-004 | EN-Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet style A straight unsealed with clamp strain relief for EN 2997 and EN 4067 - Prod | |
| CEN EN 3660-005 | EN-Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet style A 90° unsealed with clamp strain relief for EN 2997 and EN 4067 - Product | |
| CEN EN 3686 | EN-Aerospace series - Bolts double hexagon head relieved shank long thread in heat resisting steel FE-PA92HT (A286) silver plated - Classification: 1 100 MPa/650 °C | |
| CEN EN 3724 | EN-Aerospace series - Bolts double hexagon head relieved shank long thread in titanium alloy TI-P64001 MoS2 coated - Classification: 1 100 MPa (at ambient temperature) | |
| CEN EN 3725 | EN-Bolts pan head six lobe recess normal shank long thread in titanium alloy TI-P64001 MoS2 coated - Classification: 1 100 MPa (at ambient temperature) | |
| CEN EN 3726 | EN-Aerospace series - Nuts self-locking clip in heat resisting steel FE-PA92HT (A286) MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degrees C | |
| CEN EN 3730 | EN-Aerospace Series - Clamps Saddle Fixed and Sliding Version in Aluminium Alloy with Rubber Cushioning - Dimensions Masses | |
| CEN EN 3741 | EN-Aerospace series - Nuts clip metric Installation holes and assembly | |
| CEN EN 3746 | EN-Aerospace series - O-rings in fluorosilicone rubber (FVMQ) Hardness 80 IRHD | |
| CEN EN 3747 | EN-Aerospace series - O-rings in fluorosilicone rubber (FVMQ) Technical specification | |
| CEN EN 3752 | EN-Aerospace series - Nuts self-locking MJ threads in heat resisting steel FE-PA92HT (A286) MoS2 coated Classification: 1 100 MPa (at ambient temperature) / 425 degrees Celsius Technical specification | |
| CEN EN 3818 | EN-Aerospace series - Bolts with MJ threads in titanium alloy TI-P64001 - Classification: 1100 MPa (at ambient temperature) - Technical specification | |
| CEN EN 3831 | EN-Aerospace series - Inserts thickwall self-locking in heat resisting steel FE-PM3801 (17-4PH) MoS2 coated | |
| CEN EN 3832 | EN-Aerospace series - Bolts double hexagon head relieved shank long thread in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 degrees C | |
| CEN EN 3833 | EN-Aerospace series - Bolts MJ threads in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 degrees C - Technical specifications | |
| CEN EN 3867 | EN-Aerospace series - Pipe couplings loose flanges and seals - Flanges in titanium alloy TI-P64001 | |
| CEN EN 3868 | EN-Aerospace series - Pipe couplings loose flanges and seals - Flange connectors welded in titanium alloy TI-P64001 | |
| CEN EN 3869 | EN-Aerospace series - Pipe couplings loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy | |
| CEN EN 3899 | EN-Aerospace series - Inserts thickwall self-locking MJ threads in heat resisting steel FE-PM3801 (17-4PH) - Technical specification | |
| CEN EN 3907 | EN-Aerospace series - Bolts double hexagon head normal shank long thread in titanium alloy TI-P64001 MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/350 °C | |
| CEN EN 393 | EN-Lifejackets and Personal Buoyancy Aids - Buoyancy Aids - 50 N-Includes Amendment A1:1998;:2006 | |
| CEN EN 394 | EN-Lifejackets and Personal Buoyancy Aids - Additional Items-Superseded by (EN ISO 12402-8): 2000 | |
| CEN EN 3960 | EN-Aerospace Series - Gold Base Alloy AU-B40001 (AuNi18) - Filler Metal for Brazing - Powder or Paste | |
| CEN EN 4009 | EN-Aerospace series - Bolts double hexagon head close tolerance shank medium length thread in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 degre | |
| CEN EN 4011 | EN-Aerospace series - Nuts bihexagonal self-locking in heat resisting nickel base alloy TI-P100HT (Inconel 718) silver plated - Classification: 1 550 MPa (at ambient temperature) /600°C | |
| CEN EN 4012 | EN-Aerospace series - Nuts bihexagonal self-locking in heat resisting nickel base alloy NI-P100HT (Inconel 718) MoS2 coated - Classification: 1 500 MPa (at ambient temperature)/425 degrees C | |
| CEN EN 4013 | EN-Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-P100HT (Inconel 718) silver plated - Classification: 1 550 MPa (at ambient temperature)/600°C | |
| CEN EN 4014 | EN-Aerospace series - Inserts thickwall self-locking - Design standard | |
| CEN EN 4015 | EN-Aerospace series - Inserts thickwall self-locking Installation and removal procedure | |
| CEN EN 4018 | EN-Aerospace Sreies - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Elbows 90 Degrees with Thrust Wire Nut | |
| CEN EN 4020 | EN-Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Elbows 90 Degree Welded End with Thrust Wire Nut | |
| CEN EN 4024 | EN-Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Elbows 45 Degree Welded End with Thrust Wire Nut | |
| CEN EN 4047 | EN-Aerospace series - Nuts self-locking MJ threads in heat resisting nickel base alloy NI-PH2601 (Inconel 718) silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C - Technical specification | |
| CEN EN 4048 | EN-Aerospace series - Nuts self-locking MJ threads in heat resisting nickel base alloy NI-PH2601 (Inconel 718) MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 Degrees C - Technical specificati | |
| CEN EN 4054 | EN-Aerospace Series - Pipe couplings loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification | |
| CENELEC EN 41003 | EN-Particular Safety Requirements for Equipment to Be Connected to Telecommunication Networks | |
| CENELEC EN 41003 | EN-Particular Safety Requirements for Equipment to Be Connected to Telecommunication Networks | |
| CENELEC EN 41003 | EN-Particular Safety Requirements for Equipment to Be Connected to Telecommunication Networks | |
| CENELEC EN 41003 | EN-Particular Safety Requirements for Equipment to be Connected to Telecommunication Networks | |
| CEN EN 4113 | EN-Aerospace Series - Clamps Loop ("P" Type) in Corrosion Resisting Steel Passivated with Rubber Cushioning - Dimensions Masses | |
| CEN EN 4114 | EN-Aerospace Series - Clamps Loop ("P" Type) in Aluminium Alloy with Rubber Cushioning - Dimensions Masses | |
| CEN EN 4115 | EN-Aerospace Series - Cushion Rubber for Clamps - Dimensions Masses | |
| CEN EN 4116 | EN-Aerospace series - Nuts hexagonal self-locking in heat resisting steel FE-PA92HT (A286) silver plated on thread Classification: 1 100MPa (at ambient temperature)/425 degrees Celsius | |
| CEN EN 4117 | EN-Aerospace series - Nuts bihexagonal self-locking in heat resisting nickel base alloy NI-PH 2601 (Inconel 718) silver plated on thread - Classification: 1550 MPa (at ambient temperature)/600°C | |
| CEN EN 4119 | EN-Aerospace series - Nuts bihexagonal self-locking deep counterbored in heat resisting steel FE-PA92HT (A286) silver plated on thread Classification: 1 100 MPa (at ambient temperature) / 650 degrees Celsius | |
| CEN EN 4121 | EN-Aerospace series - Shank nuts serrated self-locking in heat resisting steel FE-PA92HT (A286) silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 Degrees C | |
| CEN EN 4122 | EN-Aerospace series - Shank nuts self-locking in heat resisting steel FE-PA92HT (A286) silver plated on thread - Classification: 1 100MPa (at ambient temperature) / 650 Degrees C | |
| CEN EN 4123 | EN-Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-PH2601 (Inconel 718) silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600 °C | |
| CEN EN 4124 | EN-Aerospace series - Shank nuts self-locking in heat esisting nickel base alloy NI-PH-1302 (Waspaloy) silver plated on thread for 60 swage - Classification: 1210 MPa (at ambient temperature)/730 °C | |
| CEN EN 4129 | EN-Aerospace series - Bolts normal hexagonal head coarse tolerance normal shank medium length thread in alloy steel cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C | |
| CEN EN 4130 | EN-Aerospace series - Bolts normal hexagonal head coarse tolerance normal shank medium length thread in titanium alloy aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degrees C | |
| CEN EN 4131 | EN-Aerospace series - Bolts normal hexagonal head coarse tolerance normal shank medium length thread in heat resisting nickel base alloy aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 4 | |
| CEN EN 415-1 | EN-Packaging Machines Safety - Part 1: Terminology and Classification of Packaging Machines and Associated Equipment | |
| CEN EN 415-3 | EN-Safety of Packaging Machines - Part 3: Form Fill and Seal Machines | |
| CEN EN 415-5 | EN-Safety of packaging machines - Wrapping machines | |
| CEN EN 415-6 | EN-Safety of packaging machines - Part 6: Pallet wrapping machines | |
| CEN EN 415-7 | EN-Safety of packaging machines - Part 7: Group and secondary packaging machines | |
| CEN EN 4161 | EN-Aerospace series - Screws pan head offset cruciform recess coarse tolerance normal shank long thread in alloy steel cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 degree C | |
| CEN EN 4166 | EN-Aerospace series - Clips spring tension three parts PTFE bushes | |
| CEN EN 4167 | EN-Aerospace serie - Clips spring tension three parts Inner clips in heat resisting steel FE-PA92HT (A286) | |
| CEN EN 4168 | EN-Aerospace series - Clips spring tension three parts Outer clips in heat resisting steel FE-PA92HT (A286) |