EUROFILE - Electronics Collection
This collection contains documents from the following standards organization(s):
European Committee for Electrotechnical Standardization, European Committee for Standardization
Most Popular Standards from the EUROFILE - Electronics Collection
| CENELEC EN 60939-2-2 | EN-Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (safety | |
| CENELEC EN 50065-4-5 | EN-Signalling on low-voltage electrical installations in the frequency range 3 kHz to 1485 kHz Part 4-5: Low voltage decoupling filter - Segmentation filter | |
| CENELEC EN 60825-1 | EN-Safety of laser products - Part 1: Equipment classification and requirements | |
| CENELEC EN 50065-4-7 | EN-Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 1485 kHz and 16 MHz to 30 MHz Part 4-7: Portable low voltage decoupling filters - Safety requirements-Incorporating corrigendum Octo | |
| CENELEC EN 60252-1 | EN-A.C. Motor Capacitors Part 1: General - Performance Testing and Rating - Safety Requirements - Guide for Installation and Operation-IEC 60252-1:2001 | |
| CENELEC EN 133200 | EN-Sectional Specification: Passive Filter Units for Electromagnetic Interference Suppression (Filters for Which Safety Tests are Required) | |
| CENELEC EN 61192-5 | EN-Workmanship requirements for soldered electronic assemblies - Part 5: Rework modification and repair of soldered electronic assemblies | |
| CEN EN ISO 11254-2 | EN-Lasers and Laser-Related Equipment - Determination of Laser-Induced Damage Threshold of Optical Surfaces - Part 2: S-on-1 Test-ISO 11254-2:2001 | |
| CENELEC EN 60939-2 | EN-Passive filter units for electromagnetic interference suppression Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements-IEC 60939-2:200 | |
| CENELEC EN 62384 | EN-DC or AC supplied electronic control gear for LED modules - Performance requirements | |
| CENELEC EN 50324-1 | EN-Piezoelectric Properties of Ceramic Materials and Components Part 1: Terms and Definitions | |
| CENELEC EN 60252-2 | EN-AC motor capacitors Part 2: Motor start capacitors-IEC 60252-2:2003 | |
| CENELEC EN 61709 | EN-Electronic Components - Reliability - Reference Conditions for Failure Rates and Stress Models for Conversion-IEC 61709:1996 | |
| CENELEC EN 50419 | EN-Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) | |
| CENELEC EN 175301-803 | EN-Detail Specification: Rectangular connectors - Flat contacts 08 mm thickness locking screw not detachable | |
| CENELEC EN 60838-2-2 | EN-Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules-IEC 60838-2-2:2006 | |
| CENELEC EN 61049 | EN-Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements (IEC 1049 : 1991 + Corrigendum 1992 Modified) | |
| CENELEC EN 60352-2 | EN-Solderless Connections Part 2: Crimped Connections - General Requirements Test Methods and Practical Guidance-IEC 60352-2: 2006 | |
| CENELEC EN 60825-4 | EN-Safety of laser products - Part 4: Laser guards-IEC 60825-4:2006; Remains Current | |
| CENELEC EN 100015-4 | EN-Basic Specification: Protection of Electrostatic Sensitive Devices Part 4: Requirements for High Voltage Environments | |
| CEN EN 28877 | EN-Information Technology - Telecommunications and Information Exchange Between Systems - Interface Connector and Contact Assignments for ISDN Basic Access Interface Located at Reference Points S and T (ISO/IEC 8877 : 1 | |
| CENELEC EN 60938-1 | EN-Fixed inductors for electromagnetic interference suppression Part 1: Generic specification-Incorporating Amendment A1: 02/2007 | |
| CENELEC EN 61587-3 | EN-Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding performance tests for cabinets racks and subracks | |
| CENELEC EN 61727 | EN-Photovoltaic (PV) Systems Characteristics of the Utility Interface (IEC 1727 : 1995) | |
| CENELEC EN 60617-13 | EN-Graphical Symbols for Diagrams Part 13: Analogue Elements (IEC 617-13 : 1993) | |
| CENELEC EN 60062 | EN-Marking codes for resistors and capacitors-Incorporating corrigendum January 2007 | |
| CENELEC EN 62326-1 | EN-Printed Boards Part 1: Generic Specification-IEC 62326-1: 2002 | |
| CENELEC EN 61967-1 | EN-Integrated Circuits - Measurement of Electromagnetic Emissions 150 kHZ to 1 GHz Part 1: General Conditions and Definitions-IEC 61967-1: 2002 | |
| CEN EN ISO 11146-2 | EN-Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Part 2: General astigmatic beams-ISO 11146-2:2005 | |
| CENELEC EN 100015-3 | EN-Basic Specification: Protection of Electrostatic Sensitive Devices Part 3: Requirements for Clean Room Areas | |
| CENELEC EN 60747-5-2 | EN-Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and Characteristics-Includes Amendment A1:2002 | |
| CEN EN ISO 11146-1 | EN-Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams-ISO 11146-1:2005 | |
| CENELEC EN 50065-4-1 | EN-Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 1485 kHz Part 4-1: Low Voltage Decoupling Filters - Generic Specification-Ratified European Text:01/08/2001 | |
| CENELEC EN 60068-2-42 | EN-Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections-IEC 60068-2-42: 2003 | |
| CENELEC EN 60831-2 | EN-Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kV Part 2: Ageing Test Self-Healing Test and Destruction Test (IEC 831-2 : 1995) | |
| CENELEC HD 363 | EN-Dimensions of Spindle Ends for Manually Operated Electronic Components | |
| CEN CLC/TR 50448 | EN-Guide to levels of competence required in laser safety | |
| CENELEC EN 60603-7-4 | EN-Connectors for electronic equipment Part 7-4: Detail specification for 8-way unshielded free and fixed connectors for data transmissions with frequencies up to 250 MHz-IEC 60603-7-4:2005 | |
| CENELEC EN 60617-4 | EN-Graphical Symbols for Diagrams Part 4: Basic Passive Components (IEC 617-4 : 1996) | |
| CENELEC EN 61249-2-7 | EN-Materials for Printed Boards and Other Interconnecting Structures Part 2-7: Reinforced Base Materials Clad and Unclad - Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test) Copper-Cl | |
| CENELEC EN 61921 | EN-Power capacitors Low-voltage power factor correction banks-IEC 61921:2003 | |
| CENELEC EN 100015-2 | EN-Basic Specification: Protection of Electrostatic Sensitive Devices Part 2: Requirements for Low Humidity Conditions | |
| CENELEC EN 60747-5-3 | EN-Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices Measuring methods-Includes amendment A1:2002 | |
| CENELEC EN 61086-3-1 | EN-Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1) high reliability (Class 2) and aerospace (Class 3) (IEC 61086-3 | |
| CENELEC EN 61967-4 | EN-Integrated circuits - Measurement of electromagnetic emissions 150 kHz to 1 GHz Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method-Includes Amendment A1:2/2006; Corrigendum: 12/2006 | |
| CENELEC EN 61967-5 | EN-Integrated circuits Measurement of electromagnetic emissions 150 kHz to 1 GHz Part 5: Measurement of conducted emissions Workbench Faraday Cage method-IEC 61967-5:2003 | |
| CENELEC EN 140400 | EN-Sectional Specification: Fixed Low Power Surface Mounting (SMD) Resistors | |
| CENELEC EN 175301-801 | EN-Detail Specification: High Density Rectangular Connectors Round Removable Crimp Contacts | |
| CENELEC EN 50065-4-2 | EN-Signalling on low voltage electrical installations in the frequency range 3 kHz to 1485 kHz and 16 MHz to 30 MHz Part 4-2: Low voltage decoupling filters - Safety requirements-Includes Amendments A1:2003 and A2:200 | |
| CENELEC EN 60130-9 | EN-Connectors for Frequencies Below 3 MHz Part 9: Circular Connectors for Radio and Associated Sound Equipment-IEC 60130-9: 2000 |
View Alphabetical Listing of Documents
- Documents: CENELEC CECC 96 701 to CENELEC EN 60146-2
- Documents: CEN EN 60191-6 to CEN EN 60512-11-7
- Documents: CENELEC EN 60512-12-2 to CENELEC EN 60603-7-7
- Documents: CENELEC EN 60603-9 to CENELEC EN 61076-3-116
- Documents: CENELEC EN 61076-4 to CENELEC EN 61747-4
- Documents: CENELEC EN 61747-5-3 to CENELEC EN ISO 11807-1


