EUROFILE - Electrical Collection
This collection contains documents from the following standards organization(s): European Committee for Electrotechnical Standardization, European Committee for Standardization
| CENELEC EN 61241-2-2 | EN-Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods Section 2: Method for Determining the Electrical Resistivity of Dust in Layers (IEC 1241-2-2 : 1993 + Corrigendum 1994) | |
| CENELEC EN 61241-4 | EN-Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection "pD" | |
| CENELEC EN 61243-1 | EN-Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.-IEC 61243-1: 2003 | |
| CENELEC EN 61243-3 | EN-Live Working - Voltage Detectors - Part 3: Two-Pole Low Voltage Type-Incorporating Corrigendum February 2002; IEC 61243-3:1998; | |
| CENELEC EN 61248-2 | EN-Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 2: Sectional Specification for Signal Transformers on the Basis of the Capability Approval Procedure-IEC 61248-2: 1996 | |
| CENELEC EN 61248-3 | EN-Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 3: Sectional Specification for Power Transformers on the Basis of the Capability Approval Procedure-IEC 61248-3: 1996 | |
| CENELEC EN 61248-4 | EN-Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval | |
| CENELEC EN 61284 | EN-Overhead Lines - Requirements and Tests for Fittings | |
| CENELEC EN 61286 | EN-Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange-IEC 61286: 2001 modified | |
| CENELEC EN 61293 | EN-Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements; (IEC 1293 : 1994) | |
| CENELEC EN 61316 | EN-Industrial Cable Reels-IEC 61316: 1999 | |
| CENELEC EN 61318 | EN-Live working - Conformity assessment applicable to tools devices and equipment | |
| CENELEC EN 61334-3-22 | EN-Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase-to-Earth and Screen-to-Earth Intrusive Coupling Devices-IEC 61334-3-22:2001 | |
| CENELEC EN 61334-6 | EN-Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule-IEC 61334-6:2000 | |
| CENELEC EN 61340-2-1 | EN-Electrostatics Part 2-1: Measurement methods Ability of materials and products to dissipate static electric charge-IEC 61340-2-1: 2002 | |
| CENELEC EN 61340-3-1 | EN-Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms | |
| CENELEC EN 61340-4-4 | EN-Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)-IEC 61340-4-4: 2005 | |
| CENELEC EN 61340-5-1 | EN-Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| CENELEC EN 61347-1 | EN-Lamp controlgear - Part 1: General and safety requirements-Incorporating Corrigendum July 2003; Incorporates Amendment A1: 2008; Remains Current | |
| CENELEC EN 61347-1 | EN-Lamp controlgear - Part 1: General and safety requirements | |
| CENELEC EN 61347-2-1 | EN-Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters)-Includes amendment A1: 3/2006; Incorporating Corrigendum July 2003 and November 2006 | |
| CENELEC EN 61347-2-1 | EN-Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters)-Supersedes EN 60926:1996; IEC 61347-2-1:2000; Incorporating Corrigendum July 2003; A1: April 2006 | |
| CENELEC EN 61347-2-10 | EN-Lamp Controlgear Part 2-10: Particular Requirements for Electronic Invertors and Convertors for High-Frequency Operation of Cold Tubular Discharge Lamps (Neon Tubes)-IEC 61347-2-10:2000; Remains Current | |
| CENELEC EN 61347-2-10 | EN-Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)-Incorporates Amendment A1: 2009 | |
| CENELEC EN 61347-2-11 | EN-Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires-IEC 61347-2-11: 2001 | |
| CENELEC EN 61347-2-12 | EN-Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)-IEC 61347-2-12:2005 | |
| CENELEC EN 61347-2-13 | EN-Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | |
| CENELEC EN 61347-2-2 | EN-Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps-Amendment A2: June 2006; Amendment A1: March 2006; Supersedes EN 61046:1994 + A1:1996; | |
| CENELEC EN 61347-2-3 | EN-Lamp controlgear Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps-Includes amendment A1:2004; IEC 61347-2-3:2000 + A1:2004; Supersedes EN 60928:1995; Corr July 2003; A1:S | |
| CENELEC EN 61347-2-4 | EN-Lamp Controlgear Part 2-4: Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighting-Partly Supersedes EN 60924:1991 + A1:1994; IEC 61347-2-4:2000; Incorporating Corrigendum July 2003 | |
| CENELEC EN 61347-2-7 | EN-Lamp Controlgear Part 2-7: Particular Requirements for D.C. Supplied Electronic Ballasts for Emergency Lighting | |
| CENELEC EN 61347-2-8 | EN-Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps-Incorporating Corrigendum July 2003; Includes Amendment A1: 02/2006;: 1991 | |
| CENELEC EN 61347-2-9 | EN-Lamp controlgear Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)-Incorporating Corrigendum July 2003; A1: December 2003; A2: August 2006; Supersedes EN 60922:1997; IE | |
| CENELEC EN 61378-1 | EN-Convertor Transformers Part 1: Transformers for Industrial Applications | |
| CENELEC EN 61378-2 | EN-Convertor Transformers Part 2: Transformers for HVDC Applications-IEC 61378-2:2001 | |
| CENELEC EN 61386-1 | EN-Conduit systems for cable management - Part 1: General requirements | |
| CENELEC EN 61386-21 | EN-Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems-Incorporates Corrigendum April 2004; | |
| CENELEC EN 61386-21/FPRAA | EN-Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems | |
| CENELEC EN 61386-22/FPRAA | EN-Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems | |
| CENELEC EN 61386-23/FPRAA | EN-Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems | |
| CENELEC EN 61395 | EN-Overhead Electrical Conductors Creep Test Procedures for Stranded Conductors | |
| CENELEC EN 61427 | EN-Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test | |
| CENELEC EN 61429 | EN-Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 and Indications Regarding Directives 93/86/EEC and 91/157/EEC-Includes Amendment A11: 1998 | |
| CENELEC EN 61434 | EN-Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Guide to the Designation of Current in Alkaline Secondary Cell and Battery Standards-IEC 1434: 1996 | |
| CENELEC EN 61436 | EN-Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Sealed Nickel-Metal Hydride Rechargeable Single Cells-IEC 61436:1998; Superseded by EN 61951-2: 2003 | |
| CENELEC EN 61439-1 | EN-Low-voltage switchgear and controlgear assemblies - Part 1: General rules | |
| CENELEC EN 61439-2 | EN-Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies | |
| CENELEC EN 61442 | EN-Test methods for accessories for power cables with rated voltages from 6 kV (Um = 72 kV) up to 36 kV (Um = 42 kV)-IEC 61442:2005 modified | |
| CENELEC EN 61466-2 | EN-Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 2: Dimensional and electrical characteristics-Incorporates Amendment A1: 2002 | |
| CENELEC EN 61467 | EN-Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests | |
| CENELEC EN 61477 | EN-Live working - Minimum requirements for the utilization of tools devices and equipment-IEC 61477:2001 + A1:2002 + A2:2004; Includes amendments A1:2002 and A2:2005 | |
| CENELEC EN 61478 | EN-Live Working - Ladders of Insulating Material-Including Amendment A1: 2003; IEC 61478: 2001 | |
| CENELEC EN 61479 | EN-Live working Flexible conductor covers (line hoses) of insulating material-Includes amendment A1: 2002; IEC 61479: 2001 + A1: 2002 | |
| CENELEC EN 61482-1-1 | EN-Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing | |
| CENELEC EN 61482-1-2 | EN-Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directe | |
| CENELEC EN 61496-1 | EN-Safety of machinery - Electro-sensitive protective equipment Part 1: General requirements and tests-Incorporates Amendment A1: 2008; Incorporating corrigendum February 2010 | |
| CENELEC EN 61496-3 | EN-Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)-IEC 61496-3:2001; | |
| CENELEC EN 61508-1 | EN-Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements | |
| CENELEC EN 61508-4 | EN-Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations | |
| CENELEC EN 61534-1 | EN-Powertrack systems Part 1: General requirements-IEC 61534-1:2003 | |
| CENELEC EN 61534-21 | EN-Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting-IEC 61534-21:2006 | |
| CENELEC EN 61534-22 | EN-Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation | |
| CENELEC EN 61535 | EN-Installation couplers intended for permanent connection in fixed installations | |
| CENELEC EN 61537 | EN-Cable management - Cable tray systems and cable ladder systems | |
| CENELEC EN 61543 | EN-Residual current-operated protective devices (RCDs) for household and similar useElectromagnetic compatibility-Includes Amendments A11:2003 A12:2005 and A2:2006; IEC 61543:1995 | |
| CENELEC EN 61547 | EN-Equipment for General Lighting Purposes EMC Immunity Requirements-Includes Amendment A1:2000; IEC 61547: 1995 + A1:2000; Remains Current | |
| CENELEC EN 61547 | EN-Equipment for general lighting purposes - EMC immunity requirements | |
| CENELEC EN 61549 | EN-Miscellaneous Lamps-Incorporates Amendment A2: 2010 | |
| CENELEC EN 61557-1 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 1: General requirements | |
| CENELEC EN 61557-1 | EN-Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 15 kV d.c. - Equipment for Testing Measuring or Monitoring of Protective Measures Part 1: General Requirements-IEC 61557-1: 1997 | |
| CENELEC EN 61557-10 | EN-Electrical Safety in Low Voltage Distribution Systems Up to 1 000 V A.C. and 1 500 V D.C. - Equipment for Testing Measuring or Monitoring of Protective Measures Part 10: Combined Measuring Equipment for Testing Mea | |
| CENELEC EN 61557-11 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors | |
| CENELEC EN 61557-12 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring device | |
| CENELEC EN 61557-2 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 2: Insulation resistance | |
| CENELEC EN 61557-3 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 3: Loop impedance | |
| CENELEC EN 61557-4 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipoten | |
| CENELEC EN 61557-5 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 5: Resistance to earth | |
| CENELEC EN 61557-6 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (R | |
| CENELEC EN 61557-7 | EN-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 7: Phase sequence |