Print Page Email Page Smaller Text Larger Text

EUROFILE - Electrical and Mechanical Engineering Collection

This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization

CENELEC EN 60204-11 EN-Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV-Incorporating corrigendum February 2010 
CENELEC EN 60204-31 EN-Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines units and systems-IEC 60204-31:1996 Modified; Supersedes EN 60204-3-1:1990; Incorporating C 
CENELEC EN 60204-32 EN-Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines 
CENELEC EN 60205 EN-Calculation of the effective parameters of magnetic piece parts-Incorporates Amendment A1: 2009 
CENELEC EN 60214-1 EN-Tap-changers Part 1: Performance requirements and test methods 
CENELEC EN 60216-1 EN-Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results-IEC 60216-1:2001 
CENELEC EN 60216-2 EN-Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria-(IEC 60216-2):2005;:1992 
CENELEC EN 60216-3 EN-Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics 
CENELEC EN 60216-4-1 EN-Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens-IEC 60216-4-1:2006;:1992 
CENELEC EN 60216-4-2 EN-Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius-IEC 60216-4-2:2000 
CENELEC EN 60216-4-3 EN-Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens-IEC 60216-4-3:2000 
CENELEC EN 60216-5 EN-Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material 
CENELEC EN 60216-6 EN-Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-IEC 60216-6:2006 
CENELEC EN 60228 EN-Conductors of insulated cables-IEC 60228:2004; Supersedes HD 383 S2:1986 + A1:1989 + A2:1993 
CENELEC EN 60229 EN-Electric cables - Tests on extruded oversheaths with a special protective function 
CENELEC EN 60230 EN-Impulse Tests on Cables and Their Accessories-IEC 60230: 1966; Supersedes HD 48 S1: 1977 
CENELEC EN 60238 EN-Edison screw lampholders-Incorporates Corrigendum January 2005; Incorporates Amendment A1: 2008 
CENELEC EN 60239 EN-Graphite electrodes for electric arc furnaces Dimensions and designation-IEC 60239: 2005 
CENELEC EN 60243-1 EN-Electrical Strength of Insulating Materials - Test Methods Part 1: Tests at Power Frequencies-IEC 60243-1:1998; Supersedes HD 559.1 S1:1991 
CENELEC EN 60243-2 EN-Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage-Supersedes HD 559.2 S1:1991; IEC 60243-2:2001 
CENELEC EN 60243-3 EN-Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 12/50 US Impulse Tests-IEC 60243-3:2001 
CENELEC EN 60247 EN-Insulating liquids Measurement of relative permittivity dielectric dissipation factor (tan $) and d.c. resistivity-IEC 60247:2004 
CENELEC EN 60254-1 EN-Lead-acid traction batteries Part 1: General requirements and methods of test-IEC 60254-1:2005 
CENELEC EN 60254-2 EN-Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells 
CENELEC EN 60255-1 EN-Measuring relays and protection equipment - Part 1: Common requirements 
CENELEC EN 60255-11 EN-Measuring relays and protection equipment - Part 11: Voltage dips short interruptions variations and ripple on auxiliary power supply port 
CENELEC EN 60255-151 EN-Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection 
CENELEC EN 60255-21-1 EN-Electrical Relays Part 21: Vibration Shock Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 1: Vibration Tests (Sinusoidal) (IEC 255-21-1 : 1988) 
CENELEC EN 60255-21-2 EN-Electrical Relays Part 21: Vibration Shock Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 2: Shock and Bump Tests (IEC 255-21-2 : 1988) 
CENELEC EN 60255-21-3 EN-Electrical Relays Part 21: Vibration Shock Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 3: Seismic Tests (IEC 255-21-3 : 1993) 
CENELEC EN 60255-22-1 EN-Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests 
CENELEC EN 60255-22-2 EN-Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 
CENELEC EN 60255-22-3 EN-Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity 
CENELEC EN 60255-22-4 EN-Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test 
CENELEC EN 60255-22-5 EN-Electrical Relays Part 22-5: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Surge Immunity Test-IEC 60255-22-5: 2002 
CENELEC EN 60255-22-6 EN-Electrical Relays - Part 22-6: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Immunity to Conducted Disturbances Induced by Radio Frequency Fields-IEC 60255-22-6:2001 
CENELEC EN 60255-22-7 EN-Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests-IEC 60255-22-7:2003 
CENELEC EN 60255-24 EN-Electrical Relays Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems-IEC 60255-24: 2001 
CENELEC EN 60255-25 EN-Electrical Relays Part 25: Electromagnetic Emission Tests for Measuring Relays and Protection Equipment-IEC 60255-25: 2000 
CENELEC EN 60255-26 EN-Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements 
CENELEC EN 60255-27 EN-Measuring relays and protection equipment Part 27: Product safety requirements-IEC 60255-27:2005 
CENELEC EN 60255-5 EN-Electrical Relays Part 5: Insulation Coordination for Measuring Relays and Protection Equipment - Requirements and Tests-IEC 60255-5:2000 
CENELEC EN 60255-8 EN-Electrical Relays Part 8: Thermal Electrical Relays-IEC 60255-8:1990 Modified 
CENELEC EN 60264-1 EN-Packaging of winding wires - Part 1: Containers for round winding wires-Incorporates Amendment A1: 2009 
CENELEC EN 60264-2-1 EN-Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 1: Basic dimensions-Includes amendment A1:2003; IEC 60264-2-1:1989/A1:2003 
CENELEC EN 60264-2-2 EN-Packaging of winding wires Part 2-2: Cylindrical barrelled delivery spools Specification for returnable spools made from thermoplastic material-Includes amendment A1:2004; IEC 60264-2-2:1990 + A1:2003; Supersedes H 
CENELEC EN 60264-2-3 EN-Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools Specification for non-returnable spools made from thermoplastic material-Includes Amendment A1:2004; IEC 60264-2-3:1990 + A1:2003; Supersed 
CENELEC EN 60264-3-1 EN-Packaging of winding wires Part 3-1: Taper barrelled delivery spools Basic dimensions-Includes amendment A1:2003; IEC 60264-3-1:1999 + A1:2003 
CENELEC EN 60264-3-2 EN-Packaging of Winding Wires Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made from Thermoplastic Materials-IEC 60264-3-2:1999 
CENELEC EN 60264-3-3 EN-Packaging of winding wires Part 3-3: Taper barrelled delivery spools Specification for non-returnable spools made from thermoplastic material-Includes amendment A1:2004; IEC 60264-3-3:1990 + A1:2003; Supersedes HD 
CENELEC EN 60264-3-4 EN-Packaging of Winding Wires Part 3-4: Taper Barrelled Delivery Spools - Basic Dimensions of Containers for Taper Barrelled Delivery Spools-IEC 60264-3-4:1999 
CENELEC EN 60264-3-5 EN-Packaging of Winding Wires Part 3-5: Taper Barrelled Delivery Spools - Specification for Spool Containers Made from Thermoplastic Material-IEC 60264-3-5:1999 
CENELEC EN 60264-4-1 EN-Packaging of Winding Wires Part 4: Methods of Test Section 1: Delivery Spools Made from Thermoplastic Material (IEC 264-4-1 : 1989) 
CENELEC EN 60264-4-2 EN-Packaging of winding wires Part 4-2: Methods of test Containers made from thermoplastic material for taper barrelled delivery spools-Includes Amendment A1:2004; Includes Corrigendum March 2005; IEC 60264-4-2:1992 + 
CENELEC EN 60264-5-2 EN-Packaging of Winding Wires Part 5-2: Cylindrical Barrelled Delivery Spools with Conical Flanges - Specification for Returnable Spools Made from Thermoplastic Material-IEC 60264-5-2: 2001 
CENELEC EN 60265-1 EN-High-Voltage Switches Part 1: Switches for Rated Voltages Above 1 kV and Less Than 52 kV-IEC 60265-1:1998; Supersedes HD 355.1 S3:1995 
CENELEC EN 60269-1 EN-Low-voltage fuses - Part 1: General requirements-Incorporates Amendment A1: 2009 
CENELEC EN 60269-2 EN-Low-Voltage Fuses - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application)-Includes Amendment A1:1998 and A2:2002; IEC 60269-2:1986 + A1:1995 + A2:2001 
CENELEC EN 60269-4 EN-Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices 
CENELEC EN 60276 EN-Definitions and Nomenclature for Carbon Brushes Brush-Holders Commutators and Slip-Rings-Supersedes HD 56 S2: 1991; IEC 276: 1968 + A1: 1987 
CENELEC EN 60282-1 EN-High-voltage fuses - Part 1: Current-limiting fuses 
CENELEC EN 60286-1 EN-Packaging of Components for Automatic Handling Part 1: Tape Packaging of Components with Axial Leads on Continuous Tapes-IEC 60286-1:1997; Supersedes HD 143.1 S1:1983 
CENELEC EN 60286-4 EN-Packaging of Components for Automatic Handling Part 4: Stick Magazines for Electronic Components Encapsulated in Packages of Form E and G-IEC 60286-4:1997 
CENELEC EN 60296 EN-Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear-IEC 60296:2003; Incorporates Corrigendum September 2004 
CENELEC EN 60300-1 EN-Dependability management Part 1: Dependability management systems-IEC 60300-1:2003; 
CENELEC EN 60300-3-1 EN-Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology-IEC 60300-3-1:2003 
CENELEC EN 60300-3-12 EN-Dependability management Part 3-12: Application guide - Integrated logistic support-IEC 60300-3-12:2001 
CENELEC EN 60300-3-3 EN-Dependability management Part 3-3: Application guide Life cycle costing-IEC 60300-3-3:2004 
CENELEC EN 60305 EN-Insulators for Overhead Lines with a Nominal Voltage Above 1 kV Ceramic or Glass Insulator Units for a.c. Systems Characteristics of Insulator Units of the Cap and Pin Type (IEC 305 : 1995) 
CENELEC EN 60308 EN-Hydraulic turbines Testing of control systems-IEC 60308:2005 
CENELEC EN 60309-1 EN-Plugs Socket-Outlets and Couplers for Industrial Purposes Part 1: General Requirements-Incorporating Amendment A11: May 2004 and Amendment A1: April 2007 
CENELEC EN 60309-2 EN-Plugs socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories-Incorporates Amendment A1: 5/2004; A11: 4/2007 
CENELEC EN 60309-4 EN-Plugs socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock 
CENELEC EN 60317-0-1 EN-Specifications for Particular Types of Winding Wires - Part 0-1: General Requirements - Enamelled Round Copper Wire 
CENELEC EN 60317-0-2 EN-Particular Types of Winding Wires - Part 0-2: General Requirements - Enamelled Rectangular Copper Wire-Including amendments A1:2000 and A2:2005; IEC 60317-0-2:1997 + A1:1999 + A2:2005 
CENELEC EN 60317-0-3 EN-Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire 
CENELEC EN 60317-0-4 EN-Particular Types of Winding Wires - Part 0-4: General Requirements - Glass-Fibre Wound Resin or Varnish Impregnated Bare or Enamelled Rectangular Copper Wire-Includes Amendments A1:2000 and A2:2005; IEC 60317-0-4:19 
CENELEC EN 60317-0-5 EN-Specifications for particular types of winding wires Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated bare or enamelled rectangular copper wire 
CENELEC EN 60317-0-6 EN-Specifications for particular types of winding wires Part 0-6: General requirements ? Glass-fibre wound resin or varnish impregnated bare or enamelled round copper wire-Incorporates Amendment A1: 2006