EUROFILE - Electrical and Mechanical Engineering - Historical Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 88 | EN-Pressure Governors for Gas Appliances for Inlet Pressures up to 200 mbar | |
| CEN EN 88 | EN-Pressure Governors for Gas Appliances for Inlet Pressures up to 200 mbar-Includes Amendment A1 : 1996 | |
| CEN EN 88/PRA2 | EN-Pressure Governors for Gas Appliances for Inlet Pressures up to 200 mbar | |
| CEN EN 906 | EN-Polyolefin Agricultural Twines-:2006 | |
| CEN EN 910 | EN-Destructive Tests on Welds in Metallic Materials - Bend Tests | |
| CEN EN 918 | EN-Geotextiles and Geotextile-Related Products - Dynamic Perforation Test (Cone Drop Test)-: 2006 | |
| CEN EN 921 | EN-Plastics Piping Systems - Thermoplastics Pipes - Determination of Resistance to Internal Pressure at Constant Temperature-Incorporates corrigendum AC March 1995; Superseded by EN ISO 1167-1 and EN ISO 1167-2 | |
| CEN EN 961 | EN-Gas Welding Equipment - Manifold Regulators Used in Welding Cutting and Allied Processes up to 200 Bar | |
| CEN EN 962 | EN-Transportable Gas Cylinders Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design Construction and Tests-Includes Amendments A1:1999 and A2:2000 | |
| CEN EN 962 | EN-Transportable Gas Cylinders - Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design Construction and Tests | |
| CEN EN 962 | EN-Transportable Gas Cylinders Valve Protection Caps and Valve Guards for Industrial and Medical Gas Cylinders - Design Construction and Tests-Includes Amendment A1:1999 | |
| CEN EN 969 | EN-Ductile Iron Pipes Fittings Accessories and Their Joints for Gas Pipelines - Requirements and Test Methods | |
| CEN EN 971-1 | EN-Paints and Varnishes - Terms and Definitions for Coating Materials - Part 1: General Terms-Superseded by CEN EN ISO 4618:2006 | |
| CEN EN 982 | EN-Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Hydraulics | |
| CEN EN 983 | EN-Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Pneumatics | |
| CEN EN 9956-10 | EN-Specification and Approval of Welding Procedures for Metallic Materials - Part 10: Welding Procedure Specification for Electron Beam Welding | |
| CEN EN ISO 10042 | EN-Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections-ISO 10042:2005;:1994 | |
| CEN EN ISO 10156-2 | EN-Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures-ISO 10156-2:2005 | |
| CEN EN ISO 10218-1 | EN-Robots for industrial environments - Safety requirements - Part 1: Robot | |
| CEN EN ISO 10308 | EN-Metallic Coatings - Review of Porosity Tests-ISO 10308: 1995 | |
| CEN EN ISO 10339 | EN-Ophthalmic Optics - Contact Lenses - Determination of Water Content of Hydrogel Lenses-ISO 10339: 1997;:2006 | |
| CEN EN ISO 10344 | EN-Optics and Optical Instruments - Contact Lenses - Saline Solution for Contact Lens Testing-ISO 10344:1996;:2006 | |
| CEN EN ISO 10497 | EN-Testing of valves - Fire type-testing requirements-ISO 10497:2004 | |
| CEN EN ISO 10642 | EN-Hexagon Socket Countersunk Head Screws-ISO 10642:1997 | |
| CEN EN ISO 10644 | EN-Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV-ISO 10644:1998 | |
| CEN EN ISO 10664 | EN-Hexalobular Internal Driving Feature for Bolts and Screws-ISO 10664:1999;:2005 | |
| CEN EN ISO 10673 | EN-Plain Washers for Screw and Washer Assemblies - Small Normal and Large Series - Product Grade A-Corrected 98-09-10; ISO 10673:1998 | |
| CEN EN ISO 11102-1 | EN-Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 1: Safety Requirements and Tests-ISO 11102-1: 1997 | |
| CEN EN ISO 11102-2 | EN-Reciprocating Internal Combustion Engines - Handle Starting Equipment - Part 2: Method of Testing the Angle of Disengagement-ISO 11102-2: 1997 | |
| CEN EN ISO 11116-1 | EN-Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specifications-ISO 11116-1:1999 | |
| CEN EN ISO 11116-2 | EN-Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges | |
| CEN EN ISO 11161 | EN-Safety of machinery - Integrated manufacturing systems - Basic requirements | |
| CEN EN ISO 11439 | EN-Gas Cylinders - High Pressure Cylinders for the On-Board Storage of Natural Gas as a Fuel for Automotive Vehicles-ISO 11439: 2000 | |
| CEN EN ISO 11688-1 | EN-Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 1: Planning-ISO/TR 11688-1:1995 | |
| CEN EN ISO 11984 | EN-Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage-ISO 11984:1999;:2006 | |
| CEN EN ISO 12162 | EN-Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification and Designation - Overall Service (Design) Coefficient (ISO 12162 : 1995) | |
| CEN EN ISO 12163 | EN-Dental Baseplate/Modelling Wax-ISO 12163: 1999; Superseded by EN ISO 15854: 2005 | |
| CEN EN ISO 12777-1 | EN-Methods of Test for Pallet Joints - Part 1: Determination of Bending Resistance of Pallet Nails Other Dowel-Type Fasteners and Staples-ISO 12777-1:1994 | |
| CEN EN ISO 1307 | EN-Rubber and plastics hoses for general-purpose industrial applications Bore diameters and tolerances and tolerances on length-Incorporating Corrigendum April 2006; ISO 1307:1992 | |
| CEN EN ISO 1307 | EN-Rubber and Plastics Hoses for General-Purpose Industrial Applications - Bore Diameters and Tolerances and Tolerances on Length (ISO 1307 : 1992) | |
| CEN EN ISO 13337 | EN-Spring-Type Straight Pins - Slotted Light Duty-ISO 13337: 1997 | |
| CEN EN ISO 13351 | EN-Industrial fans - Dimensions | |
| CEN EN ISO 13478 | EN-Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Full-Scale Test (FST)-ISO 13478: 1977 | |
| CEN EN ISO 13479 | EN-Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test)-ISO 13479: 1997 | |
| CEN EN ISO 13769 | EN-Gas cylinders - Stamp marking | |
| CEN EN ISO 13918 | EN-Welding - Studs and Ceramic Ferrules for Arc Stud Welding-ISO 13918:1998 | |
| CEN EN ISO 13919-2 | EN-Welding - Electron and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 2: Aluminium and its Weldable Alloys-ISO 13919-2: 2001 | |
| CEN EN ISO 1402 | EN-Rubber and Plastics Hoses and Hose Assemblies - Hydrostatic Testing-ISO 1402: 1994 | |
| CEN EN ISO 1403 | EN-Rubber Hoses Textile-Reinforced for General-Purpose Water Applications - Specification-ISO 1403: 1995 | |
| CEN EN ISO 14041 | EN-Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis-ISO 14041:1998;: 2006 | |
| CEN EN ISO 14042 | EN-Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment-ISO 14042: 2000;: 2006 | |
| CEN EN ISO 14043 | EN-Environmental Management - Life Cycle Assessment - Life Cycle Interpretation-ISO 14043: 2000;: 2006 | |
| CEN EN ISO 14113 | EN-Gas Welding Equipment - Rubber and Plastic Hoses Assembled for Compressed or Liquefied Gases up to a Maximum Design Pressure of 450 Bar-ISO 14113: 1997 | |
| CEN EN ISO 14172 | EN-Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification-ISO 14172:2003 | |
| CEN EN ISO 14314 | EN-Reciprocal internal combustion engines Recoil starting equipment General safety requirements-ISO 14314:2004 | |
| CEN EN ISO 14343 | EN-Welding consumables - Wire electrodes strip electrodes wires and rods for fusion welding of stainless and heat resisting steels - Classification | |
| CEN EN ISO 14344 | EN-Welding and allied processes - Flux and gas shielded electrical welding processes - Procurement guidelines for consumables-ISO 14344:2002 | |
| CEN EN ISO 14555 | EN-Welding - Arc Stud Welding of Metallic Materials-ISO 14555:1998 | |
| CEN EN ISO 14580 | EN-Hexalobular Socket Cheese Head Screws-ISO 14580: 2001 | |
| CEN EN ISO 14583 | EN-Hexalobular Socket Pan Head Screws-ISO 14583: 2001 | |
| CEN EN ISO 14585 | EN-Hexalobular Socket Pan Head Tapping Screws-ISO 14585: 2001 | |
| CEN EN ISO 1462 | EN-Metallic Coatings - Coatings Other Than Those Anodic to the Basis Metal - Accelerated Corrosion Tests - Method for the Evaluation of the Results (ISO 1462:1973)-Superseded by EN ISO 10289:2001 | |
| CEN EN ISO 14713 | EN-Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines | |
| CEN EN ISO 14713-3 | EN-Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing | |
| CEN EN ISO 14744-1 | EN-Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 1: Principles and Acceptance Conditions-ISO 14744-1:2000 | |
| CEN EN ISO 1478 | EN-Tapping Screws Thread-ISO 1478: 1983 | |
| CEN EN ISO 15011-1 | EN-Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 1: Determination of Emission Rate and Sampling for Analysis of Particulate Fume-ISO 15 | |
| CEN EN ISO 15011-2 | EN-Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 2: Determination of Emission Rates of Gases Except Ozone-ISO 15011-2:2003 | |
| CEN EN ISO 15011-3 | EN-Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements | |
| CEN EN ISO 15011-4 | EN-Health and safety in welding and allied processes Laboratory method for sampling fume and gases - Part 4: Fume data sheets-ISO 15011-4:2006 | |
| CEN EN ISO 15547 | EN-Petroleum and Natural Gas Industries - Plate Heat Exchangers-ISO 15547: 2000; Superseded by EN ISO 15547-1: 2005 and EN ISO 15547-2: 2005 | |
| CEN EN ISO 15609-2 | EN-Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-ISO 15609-2:2001 | |
| CEN EN ISO 15609-4 | EN-Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding | |
| CEN EN ISO 15614-1 | EN-Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys-ISO 15614-1:2004 | |
| CEN EN ISO 15614-4 | EN-Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings-ISO 15614-4: 2005 | |
| CEN EN ISO 1567 | EN-Dentistry - Denture Base Polymers-ISO 1567: 1999; Superseded by EN ISO 15854: 2005 | |
| CEN EN ISO 15744 | EN-Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-ISO 15744: 2002 | |
| CEN EN ISO 15744 | EN-Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-ISO 15744: 2002 | |
| CEN EN ISO 15783 | EN-Seal-less rotodynamic pumps Class II Specification-ISO 15783: 2002 |