EUROFILE - Electrical - Historical Collection
This collection contains documents from the following standards organization(s): European Committee for Electrotechnical Standardization, European Committee for Standardization
| CENELEC EN 50281-1-1 | EN-Electrical apparatus for use in the presence of combustible dust Part 1-1: Electrical apparatus protected by enclosures Construction and testing-Includes amendment A1: 2002; Includes Corrigendum August 1999 | |
| CENELEC EN 50281-1-1 | EN-Electrical Apparatus for Use in the Presence of Combustible Dust - Part 1-1: Electrical Apparatus Protected by Enclosures - Construction and Testing | |
| CENELEC EN 50281-1-2 | EN-Electrical Apparatus for Use in the Presence of Combustible Dust Part 1-2: Electrical Apparatus Protected by Enclosures Selection Installation and Maintenance-Partially superseded by EN 61241-14:2004 | |
| CENELEC EN 50281-1-2 | EN-Electrical Apparatus for Use in the Presence of Combustible Dust Part 1-2: Electrical Apparatus Protected by Enclosures Selection Installation and Maintenance-Incorporates Corrigenda August 1999 and December 1999; P | |
| CENELEC EN 50281-3 | EN-Equipment for use in the presence of combustible dust Part 3: Classification of areas where combustible dusts are or may be present-Superseded by EN 61241-10:2004 | |
| CENELEC EN 50284 | EN-Special Requirements for Construction Test and Marking of Electrial Apparatus of Equipment Group II Category 1 G-Superseded by en 60079-26:2004 | |
| CENELEC EN 50290-2-21 | EN-Communication Cables - Part 2-21: Common Design Rules and Construction - PVC Insulation Compounds-: 1994 | |
| CENELEC EN 50290-2-22 | EN-Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds-:1994 | |
| CENELEC EN 50290-2-26 | EN-Communication Cables Part 2-26: Common Design Rules and Construction - Halogen Free Flame Retardant Insulation Compounds-Supersedes HD 624.6 S1: 1995 | |
| CENELEC EN 50290-2-27 | EN-Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds-Incorporating Amendment A1: June 2007 | |
| CENELEC EN 50290-2-27 | EN-Communication Cables Part 2-27: Common Design Rules and Construction - Halogen Free Flame Retardant Thermoplastic Sheathing Compounds-Supersedes HD 624.7 S1:1994 | |
| CENELEC EN 50294 | EN-Measurement Method of Total Input Power of Ballast-Lamp Circuits-Includes Amendment A1: 2001 | |
| CENELEC EN 50294/A2 | EN-Measurement method of total input power of ballast-lamp circuits-Ratified European Text | |
| CENELEC EN 50298 | EN-Empty Enclosures for Low-Voltage Switchgear and Controlgear Assemblies General Requirements | |
| CENELEC EN 50299 | EN-Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 725 kV to 550 kV | |
| CENELEC EN 50300 | EN-Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards-Superseded by EN 60439-5:2006 | |
| CENELEC EN 50317 | EN-Railway applications - Current collection systems -Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line | |
| CENELEC EN 50319 | EN-Proximity Devices Requirements for Proximity Devices with Analogue Output-Superseded by EN 60947-5-7:2003 | |
| CENELEC EN 50341 PARTS 1-3 | EN-Overhead electrical lines exceeding AC 45 kV Part 1: General requirements Common specifications; Part 2: Index of National Normative Aspects; Part 3: Set of National Normative Aspects | |
| CENELEC EN 50341-1 | EN-Overhead electrical lines exceeding AC 45 kV Part 1: General requirements - Common specifications | |
| CENELEC EN 50341-3 | EN-Overhead electrical lines exceeding AC 45 kV Part 3: Set of National Normative Aspects-Incorporating corrigendam April 2006 and October 2006 | |
| CENELEC EN 50342 | EN-Lead-Acid Starter Batteries - General Requirements Methods of Test and Numbering-Includes Amendments A1:2001 and A2:2001; Supersedes EN 60095-1:1993 + A2:1995 + A11:1995 + A12:1999 + A13:1997 | |
| CENELEC EN 50342 | EN-Lead-Acid Starter Batteries - General Requirements Methods of Test and Numbering-Includes Amendments A1:2001 and A2:2001; Incorporates Corrigendum March 2003; Supersedes EN 60095-1:1993 | |
| CENELEC EN 50342 | EN-Lead-Acid Starter Batteries - General Requirements Methods of Test and Numbering-Includes Amendments A1:2001 A2:2001 and A3:2004; Incorporates Corrigendum March 2003; Supersedes EN 60095-1:1993 | |
| CENELEC EN 50345 | EN-Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines | |
| CENELEC EN 50356 | EN-Method for Spark Testing of Cables | |
| CENELEC EN 50367 | EN-Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) | |
| CENELEC EN 50368 | EN-Cable cleats for electrical installations | |
| CEN EN 50381 | EN-Transportable ventilated rooms with or without an internal source of release | |
| CENELEC EN 50419 | EN-Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE)-Incorporates Corrigendum February 2005 | |
| CENELEC EN 50419 | EN-Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) | |
| CENELEC EN 50423-3 | EN-Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 3: Set of National Normative Aspects-Incorporating Corrigendum April 2005 | |
| CENELEC EN 50428 | EN-Switches for household and similar fixed electrical installations Collateral standard Switches and related accessories for use in home and building electronic systems (HBES) | |
| CENELEC EN 55020 | EN-Electromagnetic Immunity of Broadcast Receivers and Associated Equipment-Includes Amendments A11: 1996 A12: 1999 A13: 1999 and A14: 1999; Incorporates Corrigendum December 1997 (Which Replaces Corrigendum January 1 | |
| CENELEC EN 55020 | EN-Electromagnetic Immunity of Broadcast Receivers and Associated Equipment-Includes Amendments A11:1996 A12:1999 A13:1999 and A14:1999; Incorporates Corrigendum December 1997 (Which Replaces Corrigendum January 1996) | |
| CENELEC EN 60034-1 | EN-Rotating Electrical Machines Part 1: Rating and Performance (IEC 34-1 : 1994 Modified) | |
| CENELEC EN 60034-1 | EN-Rotating Electrical Machines - Part 1: Rating and Performance-Includes Amendment A1: 1996; IEC 34-1: 1994 Modified + A1: 1996; Supersedes HD 53.1 S2: 1985 and Its Amendment; Incorporates Corrigendum April 1995 | |
| CENELEC EN 60034-1 | EN-Rotating Electrical Machines - Part 1: Rating and Performance-Includes Amendments A1: 1998 and A2: 1999; IEC 60034-1: 1996 + A1: 1997 Modified + A2: 1999 | |
| CENELEC EN 60034-1 | EN-Rotating Electrical Machines Part 1: Rating and Performance-Includes Amendment A1:1998; IEC 60034-1:1996+A1:1997 Modified | |
| CENELEC EN 60034-1 | EN-Rotating electrical machines Part 1: Rating and performance-includes amendments A1:1998 A2:1999 and A11:2002; IEC 60034-1:1996 + A1:1997 + A2:1999 modified | |
| CENELEC EN 60034-12 | EN-Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 690 V 50 Hz Incorporates AMD 2 (IEC 34-12: 1980 + A1: 1992 + A2: 1995 Mo | |
| CENELEC EN 60034-12 | EN-Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors-IEC 60034-12: 2002 | |
| CENELEC EN 60034-12 | EN-Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 690 V 50 Hz-Includes Amendments A2:1995 and A11:1999; IEC 60034-12:1980 + | |
| CENELEC EN 60034-14 | EN-Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement evaluation and limits of vibration severity-IEC 60034-14:2003 | |
| CENELEC EN 60034-14 | EN-Rotating Electrical Machines Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher Measurement Evaluation and Limits of Vibration-IEC 34-14:1996; Supersedes HD 53.14 S1:1992 | |
| CENELEC EN 60034-18-1 | EN-Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 1: General Guidelines-Includes Amendment A1: 1996; IEC 34-18-1: 1992 + Corrigendum 1992 + A1: 1996 | |
| CENELEC EN 60034-18-21 | EN-Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 21: Test Procedures for Wire-Wound Windings - Thermal Evaluation and Classification-IEC 34-18-21:1992; Equivalent to EN 187100 | |
| CENELEC EN 60034-3 | EN-Rotating Electrical Machines - Part 3: Specific Requirements for Turbine-Type Synchronous Machines (IEC 34-3 : 1988) | |
| CENELEC EN 60034-3 | EN-Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines-IEC 60034-3:2005 | |
| CENELEC EN 60034-4 | EN-Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests | |
| CENELEC EN 60034-5 | EN-Rotating Electrical Machines - Part 5: Classification of Degrees of Protection Provided by Enclosures for Rotating Machinery | |
| CENELEC EN 60034-7 | EN-Rotating Electrical Machines Part 7: Classification of Types of Constructions and Mounting Arrangements (IM Code) (IEC 34-7 : 1992) | |
| CENELEC EN 60034-7 | EN-Rotating Electrical Machines Part 7: Classification of Types of Construction and Mounting Arrangements (IM Code) | |
| CENELEC EN 60034-8 | EN-Rotating electrical machines Part 8: Terminal markings and direction of rotation-IEC 60034-8: 2002; Supersedes HD 53.8 S5: 1998 | |
| CENELEC EN 60034-9 | EN-Rotating Electrical Machines Part 9: Noise Limits-IEC 60034-9: 1997 | |
| CENELEC EN 60034-9 | EN-Rotating Electrical Machines Part 9: Noise Limits-IEC 60034-9: 2003 Modified | |
| CENELEC EN 60034-9 | EN-Rotating Electrical Machines Part 9: Noise Limits (IEC 34-9 : 1990 + Corrigendum 1991 Modified) | |
| CENELEC EN 60044-1 | EN-Instrument Transformers Part 1: Current Transformers-Supersedes HD 553 S2: 1993; IEC 60044-1: 1996 Modified | |
| CENELEC EN 60044-2 | EN-Instrument Transformers - Part 2: Inductive Voltage Transformers-IEC 60044-2: 1997Modified; Supersedes HD 554 S1: 1992 | |
| CENELEC EN 60044-2 | EN-Instrument Transformers - Part 2: Inductive Voltage Transformers-Includes Amendment A1:2000; Supersedes HD 554 S1:1992; IEC 60044-2:1997 + A1:2000 Modified | |
| CENELEC EN 60044-2 | EN-Instrument Transformers Part 2: Inductive Voltage Transformers-IEC 60044-2: 1997; Modified; Supersedes HD 554 S1: 1992 | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Includes Amendments A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996 + A5: 1996 + A6: 1996; IEC 61-1: 1969 + Supp | |
| CENELEC EN 60061-1 | EN-Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps-Includes AMD A1:1995A2:1995A3:1995A4:1996A5:1996A6:1996A7:1997A21:1998A22:1999A23:1999A24:2000" "FHXEABAAAAAAAAAA | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Supersedes HD 65.1 S1: 1978; Includes Amendment A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996 + A5: 1996 + A6: | |
| CENELEC EN 60061-1 | EN-Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps-Includes amendments A1-A3:1995 A4-A6:1996 A7:1997 A21:1998 A22:1999 A23 : 1999 A24:2000 A25-A27:20 | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Supersedes HD 65.1 S1: 1978; Includes Amendments A1:1995 A2:1995 A3:1995 A4:1996 A5:1996 A6:1996 A7: | |
| CENELEC EN 60061-1 | EN-Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps-Includes amendments A1-A3:1995 A4-A6:1996 A7:1997 A21:1998 A22-A23:1999 A24:2000 A25-A27:2001 A28- | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Supersedes HD 65.1 S1: 1978; Includes Amendment A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996 + A5: 1996 + A6: | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Includes Amendments A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996; Supersedes HD 65.1 S1: 1978; IEC 61-1: 1969 | |
| CENELEC EN 60061-1 | EN-Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps-Includes amendments A1-A3:1995 A4-A6:1996 A7:1997 A21:1998 A22:1999 A23 : 1999 A24:2000 A25-A27:20 | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Includes Amendments A1: 1995 A2: 1995 A3: 1995 A4: 1996 A5 :1996 A6: 1996 A7: 1997 A21: 1998 and A2 | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps (IEC 61-1 : 1969 + Supplements A : 1970 to N : 1992 Modified) | |
| CENELEC EN 60061-1 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1 : Lamp Caps (Includes Amendments A1 : 1995 + A2 : 1995) (IEC 61-1 : 1969 + Supplements A : 1970 to Q : 1994 Modified | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders-Includes Amendments A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996 + A5: 1996 + A6: 1996; IEC 61-2: 1969 + Su | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders-Ratified European Text | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders-Includes Amendments A1: 1995 + A2: 1995 + A3: 1995 + A4: 1996 + A5: 1996 + A6: 1996 + A7: 1997 + A18: 19 | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders (IEC 61-2: 1969 + Supplements A: 1970 to K: 1992 Modified) | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders-Includes Amendments A1:1995 A2:1995 A3:1995 A4:1996 A5:1996 A6:1996 A7:1997 A18:1998 and A19:1999 | |
| CENELEC EN 60061-2 | EN-Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders-Includes Amendments A1:1995 A2:1995 A3:1995 A4:1996 A5:1996 A6:1996 A7:1997 A18:1998 A19:1999 A |