EUROFILE - Construction and Civil Engineering Collection
This collection contains documents from the following standards organization(s): European Committee for Standardization, European Committee for Electrotechnical Standardization
| CEN EN 1451-1 | EN-Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polypropylene (PP) - Part 1: Specifications for Pipes Fittings and the System | |
| CEN EN 14516 | EN-Baths for domestic purposes | |
| CEN EN 14518 | EN-Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams | |
| CEN EN 14521 | EN-Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer | |
| CEN EN 14527 | EN-Shower trays for domestic purposes | |
| CEN EN 14528 | EN-Bidets - Functional requirements and test methods | |
| CEN EN 14533 | EN-Textiles and textile products Burning behaviour of bedding items Classification scheme | |
| CEN EN 14543 | EN-Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use-Incorporates Amendment A1: 06/2007 | |
| CEN EN 14545 | EN-Timber structures - Connectors - Requirements | |
| CEN EN 1455-1 | EN-Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes fittings and the system | |
| CEN EN 14565 | EN-Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification | |
| CEN EN 14566 | EN-Mechanical fasteners for gypsum plasterboard systems - Definitions requirements and test methods-Incorporates Amendment A1: 2009 | |
| CEN EN 1457 | EN-Chimneys - Clay/ceramic flue liners - Requirements and test methods-Incorporates Amendment A1: October 2002; Incorporating corrigenda May 2006 and April 2007 | |
| CEN EN 14575 | EN-Geosynthetic barriers - Screening test method for determining the resistance to oxidation | |
| CEN EN 14579 | EN-Natural stone test methods - Determination of sound speed propagation | |
| CEN EN 1458-1 | EN-Domestic Direct Gas-Fired Tumble Dryers of Types B22D and B23D of Nominal Heat Input Not Exceeding 6kW - Part 1: Safety | |
| CEN EN 1458-2 | EN-Domestic Direct Gas-Fired Tumble Dryers of Types B22D and B23D of Nominal Heat Input Not Exceeding 6kW - Part 2: Rational Use of Energy | |
| CEN EN 14580 | EN-Natural stone test methods Determination of static elastic modulus | |
| CEN EN 14581 | EN-Natural stone test methods - Determination of linear thermal expansion coefficient | |
| CEN EN 14587-1 | EN-Railway applications - Track - Flash butt welding of rails - Part 1: New R220 R260 R260Mn and R350HT grade rails in a fixed plant | |
| CEN EN 14587-2 | EN-Railway applications - Track - Flash butt welding of rails - Part 2: New R220 R260 R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant | |
| CEN EN 14591-1 | EN-Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure-Including Corrigendum January 2006 | |
| CEN EN 14591-2 | EN-Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers-Incorporating Corrigendum September 2008 | |
| CEN EN 14591-4 | EN-Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers-Incorporating corrigendum March 2008 | |
| CEN EN 14592 | EN-Timber structures - Dowel-type fasteners - Requirements | |
| CEN EN 14597 | EN-Temperature control devices and temperature limiters for heat generating systems | |
| CEN EN 14600 | EN-Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification | |
| CEN EN 14608 | EN-Windows - Determination of the resistance to racking | |
| CEN EN 14609 | EN-Windows - Determination of the resistance to static torsion | |
| CEN EN 14617-1 | EN-Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption | |
| CEN EN 14617-10 | EN-Agglomerated stone - Test methods - Part 10: Determination of chemical resistance | |
| CEN EN 14617-11 | EN-Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient | |
| CEN EN 14617-12 | EN-Agglomerated stone - Test methods - Part 12: Determination of dimensional stability | |
| CEN EN 14617-13 | EN-Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity | |
| CEN EN 14617-15 | EN-Agglomerated stone - Test methods - Part 15: Determination of compressive strength | |
| CEN EN 14617-16 | EN-Agglomerated stone - Test methods - Part 16: Determination of dimensions geometric characteristics and surface quality of modular tiles | |
| CEN EN 14617-2 | EN-Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending) | |
| CEN EN 14617-4 | EN-Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance | |
| CEN EN 14617-5 | EN-Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance | |
| CEN EN 14617-6 | EN-Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance | |
| CEN EN 14617-8 | EN-Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole) | |
| CEN EN 14617-9 | EN-Agglomerated stone - Test methods - Part 9: Determination of impact resistance | |
| CEN EN 14618 | EN-Agglomerated stone - Terminology and classification | |
| CEN EN 14619 | EN-Roller sports equipment - Kick scooters - Safety requirements and test methods | |
| CEN EN 1462 | EN-Brackets for Eaves Gutters - Requirements and Testing | |
| CEN EN 14622 | EN-Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A type F | |
| CEN EN 14623 | EN-Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A type G | |
| CEN EN 14629 | EN-Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete | |
| CEN EN 1463-1 | EN-Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements | |
| CEN EN 1463-2 | EN-Road Marking Materials - Retroreflecting Road Studs - Part 2: Road Test Performance Specifications | |
| CEN EN 14630 | EN-Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphalein method | |
| CEN EN 14636-1 | EN-Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints | |
| CEN EN 14636-2 | EN-Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers | |
| CEN EN 14637 | EN-Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements test methods application and maintenance | |
| CEN EN 14647 | EN-Calcium aluminate cement Composition specifications and conformity criteria | |
| CEN EN 14648 | EN-Building hardware - Fittings for shutters - Requirements and test methods | |
| CEN EN 14649 | EN-Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) | |
| CEN EN 14650 | EN-Precast concrete products - General rules for factory production control of metallic fibered concrete | |
| CEN EN 14651 | EN-Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP) residual)-Incorporates Amendment A1: 2007 | |
| CEN EN 14652 | EN-Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance safety and testing-Incorporates Amendment A1:6/2007 | |
| CEN EN 14653-1 | EN-Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications | |
| CEN EN 14653-2 | EN-Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test | |
| CEN EN 14654-1 | EN-Management and control of cleaning operations in drains and sewers - Part 1: Sewer cleaning | |
| CEN EN 1466 | EN-Child care articles - Carry cots and stands - Safety requirements and test methods-Incorporates Amendment A1: 2007 | |
| CEN EN 1467 | EN-Natural stone Rough blocks Requirements | |
| CEN EN 14679 | EN-Execution of special geotechnical works - Deep mixing-Incorporating Corrigendum June 2006 | |
| CEN EN 1468 | EN-Natural stone Rough slabs Requirements | |
| CEN EN 14682 | EN-Safety of children´s clothing - Cords and drawstrings on children´s clothing - Specifications | |
| CEN EN 14688 | EN-Sanitary appliances - Wash basins - Functional requirements and test methods | |
| CEN EN 1469 | EN-Natural stone products - Slabs for cladding - Requirements | |
| CEN EN 14691 | EN-Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning | |
| CEN EN 14692 | EN-Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer | |
| CEN EN 14693 | EN-Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt | |
| CEN EN 14694 | EN-Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment | |
| CEN EN 14695 | EN-Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics | |
| CEN EN 14697 | EN-Textiles - Terry towels and terry towel fabrics - Specification and methods of test | |
| CEN EN 14703 | EN-Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods | |
| CEN EN 14706 | EN-Thermal insulation products for building equipment and industrial installations Determination of maximum service temperature | |
| CEN EN 14707 | EN-Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation-Incorporates Amendment A1: 2007 |