BSI - Special Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN 1008 | EN-Mixing Water for Concrete - Specification for Sampling Testing and Assessing the Suitability of Water Including Water Recovered from Processes in the Concrete Industry as Mixing Water for Concrete-Supersedes BS 31 | |
| BSI BS EN 10080 | EN-Steel for the reinforcement of concrete - Weldable reinforcing steel - General | |
| BSI BS EN 10088-1 | EN-Stainless steels - Part 1: List of stainless steels | |
| BSI BS EN 10088-2 | EN-Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes | |
| BSI BS EN 10088-3 | EN-Stainless steels Part 3: Technical delivery conditions for semi-finished products bars rods wire sections and bright products of corrosion resisting steels for general purposes-Supersedes BS 1554:1990 | |
| BSI BS EN 10088-4 | EN-Stainless steels Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | |
| BSI BS EN 10088-5 | EN-Stainless steels Part 5: Technical delivery conditions for bars rods wire sections and bright products of corrosion resisting steels for construction purposes | |
| BSI BS EN 10152 | EN-Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions | |
| BSI BS EN 10163-2 | EN-Delivery requirements for surface condition of hot-rolled steel plates wide flats and sections Part 2: Plate and wide flats | |
| BSI BS EN 10164 | EN-Steel products with improved deformation properties perpendicular to the surface of the product Technical delivery conditions | |
| BSI BS EN 10204 | EN-Metallic products Types of inspection documents | |
| BSI BS EN 10210-1 | EN-Hot finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions | |
| BSI BS EN 10210-2 | EN-Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances dimensions and sectional properties-CORR 17062: April 30 2007 | |
| BSI BS EN 10216-5 | EN-Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes-CORR: September 30 2008 | |
| BSI BS EN 10219-1 | EN-Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels - Part 1: Technical delivery conditions | |
| BSI BS EN 10219-2 | EN-Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 2: Tolerances dimensions and sectional properties | |
| BSI BS EN 10220 | EN-Seamless and welded steel tubes - Dimensions and masses per unit length-CORR 16892: February 28 2007 | |
| BSI BS EN 10248-1 | EN-Hot Rolled Sheet Piling of Non Alloy Steels Part 1: Technical Delivery Conditions (V) | |
| BSI BS EN 10255 | EN-Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions-AMD 17127: May 31 2007; CORR 17157: May 31 2007 | |
| BSI BS EN 10346 | EN-Continuously hotdip coated steel flat products - Technical delivery conditions | |
| BSI BS EN 1057 + A1 | EN-Copper and copper alloys - Seamless round copper tubes for water and gas in sanitary and heating applications-AMD: March 31 2010 | |
| BSI BS EN 1176-1 | EN-Playground equipment and surfacing - Part 1: General safety requirements and test methods-CORR: September 30 2008 | |
| BSI BS EN 1176-10 | EN-Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment | |
| BSI BS EN 1176-11 | EN-Playground equipment and surfacing - Part 11: Additional specific safety requirements and test methods for spatial network | |
| BSI BS EN 1176-3 | EN-Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides-CORR: September 30 2008 | |
| BSI BS EN 1176-4 | EN-Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways-CORR: September 30 2008 | |
| BSI BS EN 1176-7 | EN-Playground equipment and surfacing - Part 7: Guidance on installation inspection maintenance and operation-CORR: September 30 2008 | |
| BSI BS EN 1177 | EN-Impact attenuating playground surfacing - Determination of critical fall height | |
| BSI BS EN 1194 | EN-Timber Structures - Glued Laminated Timber - Strength Classes and Determination of Characteristic Values | |
| BSI BS EN 12004 | EN-Adhesives for tiles - Requirements evaluation of conformity classification and designation | |
| BSI BS EN 12101-1 + A1 | EN-Smoke and heat control systems - Part 1: Specification for smoke barriers-AMD 16507: September 29 2006; CORR: November 30 2009 | |
| BSI BS EN 12101-10 | EN-Smoke and heat control systems Part 10: Power supplies | |
| BSI BS EN 12101-6 | EN-Smoke and heat control systems Part 6: Specification for pressure differential systems Kits-CORR 16745: November 30 2006; Supersedes BS 5588-4:1998 | |
| BSI BS EN 12193 | EN-Light and lighting - Sports lighting | |
| BSI BS EN 12209 | EN-Building hardware Locks and latches Mechanically operated locks latches and locking plates Requirements and test methods-CORR 16436: September 2006;: 1980 | |
| BSI BS EN 12255-1 | EN-Wastewater Treatment Plants - Part 1: General Construction Principles | |
| BSI BS EN 12255-10 | EN-Wastewater Treatment Plants - Part 10: Safety Principles | |
| BSI BS EN 12255-11 | EN-Wastewater Treatment Plants - Part 11: General Data Required | |
| BSI BS EN 12255-15 | EN-Wastewater treatment plants Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants | |
| BSI BS EN 12255-3 | EN-Wastewater Treatment Plants - Part 3: Preliminary Treatment-CORR 16723: October 31 2006 | |
| BSI BS EN 12255-4 | EN-Wastewater Treatment Plants - Part 4: Primary Settlement-CORR 13961: June 21 2002; | |
| BSI BS EN 12255-6 | EN-Wastewater Treatment Plants - Part 6: Activated Sludge Process | |
| BSI BS EN 12255-7 | EN-Wastewater Treatment Plants - Part 7: Biological Fixed-Film Reactors | |
| BSI BS EN 12255-8 | EN-Wastewater Treatment Plants - Part 8: Sludge Treatment and Storage-CORR 15294: December 13 2004 | |
| BSI BS EN 12255-9 | EN-Wastewater Treatment Plants - Part 9: Odour Control and Ventilation | |
| BSI BS EN 12369-1 | EN-Wood-Based Panels - Characteristic Values for Structural Design - Part 1: OSB Particleboards and Fibreboards | |
| BSI BS EN 12440 | EN-Natural stone - Denomination criteria | |
| BSI BS EN 12469 | EN-Biotechnology - Performance Criteria for Microbiological Safety Cabinets-Supersedes BS 5726 Parts 1 and 3: 1992; | |
| BSI BS EN 12572-1 | EN-Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points | |
| BSI BS EN 12588 | EN-Lead and Lead Alloys - Rolled Lead Sheet for Building Purposes | |
| BSI BS EN 12665 | EN-Light and Lighting Basic Terms and Criteria for Specifying Lighting Requirements | |
| BSI BS EN 12951 | EN-Prefabricated accessories for roofing Permanently fixed roof ladders Product specification and test methods | |
| BSI BS EN 12973 | EN-Value Management | |
| BSI BS EN 1307 | EN-Textile floor coverings - Classification of pile carpets | |
| BSI BS EN 131-1 | EN-Ladders - Part 1: Terms types functional sizes | |
| BSI BS EN 1313-2 | EN-Round and Sawn Timber - Permitted Deviations and Preferred Sizes - Part 2: Hardwood Sawn Timber-CORR 10981: August 2000; | |
| BSI BS EN 13253 | EN-Geotextiles and Geotextile-Related Products - Characteristics Required for Use in Erosion Control Works (Coastal Protection Bank Revetments)-AMD 15876: January 16 2006 | |
| BSI BS EN 1335-1 | EN-Office Furniture - Office Work Chair - Part 1: Dimensions - Determination of Dimensions | |
| BSI BS EN 1335-2 | EN-Office furniture - Office work chair Part 2: Safety requirements | |
| BSI BS EN 1337-4 | EN-Structural bearings Part 4: Roller bearings-CORR 17035: March 30 2007 | |
| BSI BS EN 1339 | EN-Concrete paving flags Requirements and test methods-CORR 16467: July 2006; | |
| BSI BS EN 1340 | EN-Concrete kerb units Requirements and test methods-CORR 16468: August 2006 | |
| BSI BS EN 13438 | EN-Paints and varnishes Powder organic coatings for galvanized or sherardised steel products for construction purposes-Supersedes BS 6497: 1984 | |
| BSI BS EN 13451-1 | EN-Swimming Pool Equipment - Part 1: General Safety Requirements and Test Methods | |
| BSI BS EN 13501-2 + A1 | EN-Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests excluding ventilation services-AMD: November 30 2009 | |
| BSI BS EN 13509 | EN-Cathodic protection measurement techniques-CORR 14827: December 1 2003; | |
| BSI BS EN 1363-1 | EN-Fire Resistance Tests - Part 1: General Requirements | |
| BSI BS EN 1363-2 | EN-Fire Resistance Tests - Part 2: Alternative and Additional Procedures | |
| BSI BS EN 1366-2 | EN-Fire Resistance Tests for Service Installations - Part 2: Fire Dampers | |
| BSI BS EN 13707 + A2 | EN-Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics-AMD 17389: October 31 2007; AMD: October 31 2009 | |
| BSI BS EN 13738 | EN-Geotextiles and geotextile-related products Determination of pullout resistance in soil-CORR 16430: August 2006;:1991 | |
| BSI BS EN 13829 | EN-Thermal Performance of Buildings - Determination of Air Permeability of Buildings - Fan Pressurization Method | |
| BSI BS EN 13914-1 | EN-Design preparation and application of external rendering and internal plastering Part 1: External rendering-AMD 13914: August 2006;: 1991 | |
| BSI BS EN 13986 | EN-Wood-based panels for use in construction Characteristics evaluation of conformity and marking | |
| BSI BS EN 14056 | EN-Laboratory furniture Recommendations for design and installation | |
| BSI BS EN 14081-1 | EN-Timber structures Strength graded structural timber with rectangular cross section Part 1: General requirements | |
| BSI BS EN 14081-3 | EN-Timber structures Strength graded structural timber with rectangular cross section Part 3: Machine grading; additional requirements for factory production control-Together with BS EN 14081-1: 2005 and BS EN 14081-3 | |
| BSI BS EN 14175-1 | EN-Fume cupboards Part 1: Vocabulary-AMD 17039: April 30 2007 | |
| BSI BS EN 14175-2 | EN-Fume cupboards Part 2: Safety and performance requirements-AMD 17040: April 30 2007 |