BSI - Production and Plant Collection
This collection contains documents from the following standards organization(s):
British Standards Institution
Most Popular Standards from the BSI - Production and Plant Collection
| BSI BS EN 1714 | EN-Non-destructive testing of welds - Ultrasonic testing of welded joints-CORR 10286: October 1998; AMD 13990: November 1 2002; AMD 14941: March 15 2004 | |
| BSI BS EN 746-2 | EN-Industrial Thermoprocessing Equipment Part 2: Safety Requirements for Combustion and Fuel Handling Systems-Remains Current | |
| BSI BS EN 287-1 | EN-Qualification test of welders Fusion welding Part 1: Steels-AMD 15598:February 17 2005; AMD 16295: July 31 2006: CORR 16831; January 31 2007 | |
| BSI BS EN 12068 | EN-Cathodic Protection - External Organic Coatings for the Corrosion Protection of Buried or Immersed Steel Pipelines Used in Conjunction with Cathodic Protection - Tapes and Shrinkable Materials | |
| BSI BS 6405 | EN-Non-Calibrated Short Link Steel Chain (Grade 30) for General Engineering Purposes: Class 1 and 2 | |
| BSI BS EN 60811-3-2 | EN-Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test-AMD 15142: May 12 2004;:1992; IEC 811-3-2:1 | |
| BSI BS 7361-1 | EN-Cathodic protection - Part 1: Code of practice for land and marine applications - (formerly CP 1021) | |
| BSI BS 4164 | EN-Specification for coal-tar-based hot-applied coating materials for protecting iron and steel including a suitable primer | |
| BSI BS EN 288-9 | EN-Specification and Approval of Welding Procedures for Metallic Materials - Part 9: Welding Procedure Test for Pipeline Welding on Land and Offshore Site Butt Welding of Transmission Pipelines | |
| BSI BS 5493 | EN-Code of Practice for Protective Coating of Iron and Steel Structures Against Corrosion-AMD 4443: January 1984; AMD 7898; November 1993; | |
| BSI BS EN 1435 | EN-Non-destructive testing of welds Radiographic testing of welded joints-CORR 10616:August 1999; AMD 13985:November 15 2002; AMD 14938:March 15 2004; Supersedes BS 2600-1:1983 BS 2600-2:1973 BS 2910:1986 and BS 72 | |
| BSI BS 5970 | EN-Code of Practice for Thermal Insulation of Pipework and Equipment in the Temperature Range -100 Degrees C to +870 Degrees C | |
| BSI BS 3550 | EN-SPECIFICATION FOR INVOLUTE SPLINES-AMD 1985: May 1976; AMD 4371: September 1983 | |
| BSI BS EN 1418 | EN-Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials | |
| BSI BS 2059 | EN-Straight-sided splines and serrations-AMD 1843: April 1954; Supersedes BS 46: Part 2: 1929 BS 5015: 1927 BS A 19: Part 1: 1941 BS A 19: Part 2: 1942 and BS A 20: 1942; | |
| BSI BS EN 12874 | EN-Flame Arresters - Performance Requirements Test Methods and Limits for Use-Partially Supersedes BS 7244: 1990; | |
| BSI BS EN 462-5 | EN-Non-Destructive Testing - Image Quality of Radiographs Part 5: Image Quality Indicators (Duplex Wire Type) Determination of Image Unsharpness Value (F)-Supersedes BS 3971:1980 | |
| BSI BS EN 970 | EN-Non-Destructive Examination of Fusion Welds - Visual Examination | |
| BSI BS EN 571-1 | EN-Non-Destructive Testing - Penetrant Testing Part 1: General Principles-Supersedes BS 6443: 1984; | |
| BSI BS EN 1320 | EN-Destructive Tests on Welds in Metallic Materials - Fracture Tests | |
| BSI BS 2569-2 | EN-Sprayed Metal Coatings Part 2: Protection of Iron and Steel Against Corrosion and Oxidation at Elevated Temperatures | |
| BSI BS EN ISO 15614-2 | EN-Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys-Supersedes BS EN 288-4:1992 | |
| BSI BS 5410-2 | EN-Code of Practice for Oil Firing - Part 2: Installations of 45 kW and Above Output Capacity for Space Heating Hot Water and Steam Supply Services - (Formerly Part of CP 3002-1 2 and 3)-AMD 3638: June 1981; AMD 13229 | |
| BSI BS EN 583-2 | EN-Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting | |
| BSI BS EN 1712 | EN-Non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels-AMD 13991: November 15 2002; AMD 14939: April 8 2004 | |
| BSI BS EN 1834-1 | EN-Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1: Group II Engines for Use in Flammable Gas and Vapour Atmo | |
| BSI BS EN 12223 | EN-Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1 | |
| BSI BS 6072 | EN-Method for Magnetic Particle Flaw Detection-AMD 3960: September 1982; AMD 4542: June 1984; AMD 4843: April 1985 | |
| BSI BS 4872-2 | EN-Approval Testing of Welders When Welding Procedure Approval is Not Required Part 2: TIG or MIG Welding of Aluminium and its Alloys | |
| BSI BS EN ISO 15607 | EN-Specification and qualification of welding procedures for metallic materials General rules-Supersedes BS EN 288-1:1992 | |
| BSI BS EN ISO 15614-8 | EN-Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 8: Welding of Tubes to Tube-Plate Joints-Supersedes BS 4870-3:1985; | |
| BSI BS 4999-140 | EN-General Requirements for Rotating Electrical Machines Part 140: Voltage Regulation and Parallel Operation of A.C. Synchronous Generators | |
| BSI BS EN 1711 | EN-Non-Destructive Examination of Welds - Eddy Current Examination of Welds by Complex Plane Analysis-AMD 14942: February 5 2004 | |
| BSI BS EN 895 | EN-Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test-Partially Replaces BS 709: 1983 BS 3451: 1973 and BS 4206: 1967 | |
| BSI BS EN 298 | EN-Automatic gas burner control systems for gas burners and gas burning appliances with or without fans | |
| BSI BS EN 60156 | EN-Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method (IEC 156: 1995) (F) | |
| BSI BS EN 12696 | EN-Cathodic Protection of Steel in Concrete | |
| BSI BS EN ISO 13920 | EN-Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position | |
| BSI BS 416-1 | EN-Discharge and Ventilating Pipes and Fittings Sand-Cast or Spun in Cast Iron - Part 1: Specification for Spigot and Socket Systems | |
| BSI BS ISO 8528-1 | EN-Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application ratings and performance-:1993 | |
| BSI BS EN 1559-1 | EN-Founding - Technical Conditions of Delivery Part 1: General | |
| BSI BS EN ISO 9606-3 | EN-Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys | |
| BSI BS 2972 | EN-Methods of Test for Inorganic Thermal Insulating Materials | |
| BSI BS 4006 | EN-Specification for Hand Operated Square Drive Socket Wrenches and Accessories-AMD 8314: November 1994; AMD 8555: May 1995 | |
| BSI BS 7371-2 | EN-Coatings on metal fasteners - Part 2: Specification for torque/clamping force relationship | |
| BSI BS ISO 2953 | EN-Mechanical vibration - Balancing machines - Description and evaluation | |
| BSI BS EN 60519-1 | EN-Safety in Electroheat Installations - Part 1: General Requirements | |
| BSI BS EN ISO 15609-2 | EN-Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-AMD 14953: February 9 2004 | |
| BSI BS EN ISO 9606-4 | EN-Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys | |
| BSI BS ISO 13373-1 | EN-Condition Monitoring and Diagnostics of Machines - Vibration Conditioning Monitoring - Part 1: General Procedures |
View Alphabetical Listing of Documents
- Documents: BSI BS 1089 to BSI BS 1983-4
- Documents: BSI BS 2007 to BSI BS 387
- Documents: BSI BS 3884-1 to BSI BS 4361-29
- Documents: BSI BS 4361-30 to BSI BS 4872-2
- Documents: BSI BS 4950 to BSI BS 6469-99.1
- Documents: BSI BS 6470 to BSI BS 7568-27
- Documents: BSI BS 7568-29 to BSI BS EN 10246-13
- Documents: BSI BS EN 10246-15 to BSI BS EN 12514-2
- Documents: BSI BS EN 12517-2 to BSI BS EN 13523-12
- Documents: BSI BS EN 13523-14 to BSI BS EN 14879-6
- Documents: BSI BS EN 15061 + A1 to BSI BS EN 25827
- Documents: BSI BS EN 267 to BSI BS EN 50513
- Documents: BSI BS EN 50530 to BSI BS EN 60519-4
- Documents: BSI BS EN 60519-7 to BSI BS EN 60745-2-9
- Documents: BSI BS EN 60770-2 to BSI BS EN 61158-3-14
- Documents: BSI BS EN 61158-3-17 to BSI BS EN 62068-1
- Documents: BSI BS EN 62093 to BSI BS EN 848-2 + A1
- Documents: BSI BS EN 859 + A1 to BSI BS EN ISO 13916
- Documents: BSI BS EN ISO 13919-1 to BSI BS EN ISO 15614-8
- Documents: BSI BS EN ISO 15616-1 to BSI BS EN ISO 24373
- Documents: BSI BS EN ISO 2560 to BSI BS EN ISO 8501-1
- Documents: BSI BS EN ISO 8501-3 to BSI BS ISO 10791-9
- Documents: BSI BS ISO 10844 to BSI BS ISO 16915
- Documents: BSI BS ISO 17066 to BSI BS ISO 4525
- Documents: BSI BS ISO 4703 to BSI BS ISO 8636-2
- Documents: BSI BS ISO 8694 to BSI PD CEN/TR 14715