BSI - Process and Heavy Engineering Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS ISO 22915-20 | EN-Industrial trucks - Verification of stability Part 2: Trucks operating with offset load offset determined by utilisation - Stability tests | |
| BSI BS ISO 22915-21 | EN-Industrial trucks - Verification of stability Part 21: Order-picking trucks with operator position elevating above 1 200 mm | |
| BSI BS ISO 22915-3 | EN-Industrial trucks - Verification of stability Part 3: Reach and straddle trucks | |
| BSI BS ISO 22915-4 | EN-Industrial trucks - Verification of stability Part 4: Pallet stackers double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height | |
| BSI BS ISO 22915-7 | EN-Industrial trucks - Verification of stability Part 7: Bidirectional and multidirectional trucks | |
| BSI BS ISO 22915-8 | EN-Industrial trucks - Verification of stability Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated | |
| BSI BS ISO 22951 | EN-Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO) | |
| BSI BS ISO 2314 | EN-Gas turbines - Acceptance tests | |
| BSI BS ISO 23181 | EN-Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid | |
| BSI BS ISO 23269-1 | EN-Ships and marine technology - Breathing apparatus for ships - Part 1: Emergency escape breathing devices (EEBD) for shipboard use | |
| BSI BS ISO 2328 | EN-Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions | |
| BSI BS ISO 23297 | EN-Thermoplastics hoses and hose assemblies - Wire or synthetic yarn reinforced single-pressure types for hydraulic applications - Specification | |
| BSI BS ISO 2330 | EN-Fork-Lift Trucks - Fork Arms - Technical Characteristics and Testing | |
| BSI BS ISO 23309 | EN-Hydraulic fluid power systems - Assembled systems - Methods of cleaning lines by flushing | |
| BSI BS ISO 23480 | EN-Tools for pressing - Sliding plates | |
| BSI BS ISO 23499 | EN-Coal - Determination of bulk density | |
| BSI BS ISO 24033 | EN-Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength | |
| BSI BS ISO 24100 | EN-Intelligent transport systems - Basic principles for personal data protection in probe vehicle information services | |
| BSI BS ISO 24103 | EN-Intelligent transport systems - Communications access for land mobiles (CALM) - Media adapted interface layer (MAIL) | |
| BSI BS ISO 24134 | EN-Industrial trucks Additional requirements for automated functions on trucks | |
| BSI BS ISO 24408 | EN-Ships and marine technology Position-indicating lights for life-saving appliances Testing inspection and marking of production units | |
| BSI BS ISO 24431 | EN-Gas cylinders - Cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling | |
| BSI BS ISO 251 | EN-Conveyor belts with textile carcass Widths and lengths-Partially Supersedes BS 490-1:1990 and BS 490-2:1975; | |
| BSI BS ISO 25111 | EN-Intelligent transport systems - Communications access for land mobiles (CALM) - General requirements for using public networks | |
| BSI BS ISO 25112 | EN-Intelligent transport systems - Communications access for land mobiles (CALM) - Mobile wireless broadband using IEEE 802.16 | |
| BSI BS ISO 25113 | EN-Intelligent transport systems - Communications access for land mobiles (CALM) - Mobile wireless broadband using HC-SDMA | |
| BSI BS ISO 2531 | EN-Ductile iron pipes fittings accessories and their joints for water applications | |
| BSI BS ISO 25760 | EN-Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders | |
| BSI BS ISO 25861 | EN-Ships and marine technology - Navigation - Daylight signalling lamps | |
| BSI BS ISO 2596 | EN-Iron Ores - Determination of Hygroscopic Moisture in Analytical Samples - Gravimetric and Karl Fischer Methods (V) | |
| BSI BS ISO 26382 | EN-Cogeneration systems - Technical declarations for planning evaluation and procurement | |
| BSI BS ISO 27407 | EN-Hydraulic fluid power - Marking of performance characteristics on hydraulic filters | |
| BSI BS ISO 27467 | EN-Nuclear criticality safety - Analysis of a postulated criticality accident | |
| BSI BS ISO 27991 | EN-Ships and marine technology - Marine evacuation systems - Means of communication | |
| BSI BS ISO 28004 | EN-Security management systems for the supply chain - Guidelines for the implementation of ISO 28000 | |
| BSI BS ISO 2929 | EN-Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification | |
| BSI BS ISO 2941 | EN-Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating | |
| BSI BS ISO 29945 | EN-Refrigerated non-petroleum-based liquefied gaseous fuels - Dimethylether (DME) - Method of manual sampling onshore terminals | |
| BSI BS ISO 30000 | EN-Ships and marine technology - Ship recycling management systems - Specifications for management systems for safe and environmentally sound ship recycling facilities | |
| BSI BS ISO 3019-2 | EN-Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series-CORR 16976: Febraury 28 2007 | |
| BSI BS ISO 3069 | EN-End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing | |
| BSI BS ISO 3271 | EN-Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices | |
| BSI BS ISO 3322 | EN-Fluid power systems and components - Cylinders - Nominal pressures | |
| BSI BS ISO 3434 | EN-Shipbuilding and marine structures Heated glass panes for ships- rectangular windows-Supersedes BS MA 88:1980 | |
| BSI BS ISO 3442-3 | EN-Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws | |
| BSI BS ISO 3500 + A1 | EN-Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installations on ships-AMD: August 31 2010 | |
| BSI BS ISO 3601-1 | EN-Fluid power systems - O-rings - Part 1: Inside diameters cross-sections tolerances and designation codes-CORR: August 29 2008; CORR: February 28 2010 | |
| BSI BS ISO 3601-2 | EN-Fluid power systems - O-rings - Part 2: Housing dimensions for general applications | |
| BSI BS ISO 3601-4 | EN-Fluid power systems - O-rings Part 4: Anti-extrusion rings (back-up rings) | |
| BSI BS ISO 3723 | EN-Hydraulic Fluid Power - Filter Elements - Method for End Load Test | |
| BSI BS ISO 3724 | EN-Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant | |
| BSI BS ISO 3739-3 | EN-Industrial tyres and rims - Part 3: Rims | |
| BSI BS ISO 3828 | EN-Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols | |
| BSI BS ISO 3852 | EN-Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density | |
| BSI BS ISO 3977-1 | EN-Gas turbines - Procurement - Part 1: General introduction and definitions-CORR: April 30 2008 | |
| BSI BS ISO 3977-3 | EN-Gas turbines - Procurement Part 3: Design requirements | |
| BSI BS ISO 3977-4 | EN-Gas turbines Procurement Part 4: Fuels and environment | |
| BSI BS ISO 3977-7 | EN-Gas Turbines - Procurement - Part 5: Applications for Petroleum and Natural Gas Industries | |
| BSI BS ISO 3977-8 | EN-Gas Turbines - Procurement - Part 8: Inspection Testing Installation and Commissioning | |
| BSI BS ISO 3977-9 | EN-Gas turbines Procurement Part 9: Reliability availability maintainability and safety | |
| BSI BS ISO 4079 | EN-Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - Specification | |
| BSI BS ISO 4126-9 | EN-Safety devices for protection against excessive pressure Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices | |
| BSI BS ISO 4179 | EN-Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining | |
| BSI BS ISO 4195 | EN-Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods | |
| BSI BS ISO 4250-1 | EN-Earth-mover tyres and rims Part 1: Tyre designation and dimensions-: 1991 | |
| BSI BS ISO 4250-2 | EN-Earth-mover tyres and rims Part 2: Loads and inflation pressures-: 1997 | |
| BSI BS ISO 4266-1 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 1: Measurement of level in atmospheric tanks-Together with BS ISO 4266:2002 Parts 2 to 6 It S | |
| BSI BS ISO 4266-2 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 2: Measurement of level in marine vessels-Together with BS ISO 4266:2002 Part 1 and Parts 3 to | |
| BSI BS ISO 4266-3 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)-Together with BS ISO 4 | |
| BSI BS ISO 4266-4 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 4: Measurement of temperature in atmospheric tanks-Together with BS ISO 4266:2002 Parts 1 to 3 | |
| BSI BS ISO 4266-5 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 5: Measurement of temperature in marine vessels-Together with BS ISO 4266:2002 Parts 1 to 4 an | |
| BSI BS ISO 4266-6 | EN-Petroleum and liquid petroleum products Measurement of level and temperature in storage tanks by automatic methods Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)-Together with BS | |
| BSI BS ISO 4308-1 | EN-Cranes and lifting appliances Selection of wire ropes Part 1: General | |
| BSI BS ISO 4309 + A1 | EN-Cranes - Wire ropes - Care maintenance installation examination and discard-AMD: January 31 2009 | |
| BSI BS ISO 4395 | EN-Fluid power systems and components - Cylinder piston rod end types and dimensions | |
| BSI BS ISO 4409 | EN-Hydraulic fluid power - Positive-displacement pumps motors and integral transmissions - Methods of testing and presenting basic steady state performance | |
| BSI BS ISO 4411 | EN-Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics | |
| BSI BS ISO 4427-1 | EN-Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General-CORR: November 30 2009 | |
| BSI BS ISO 4512 | EN-Petroleum and Liquid Petroleum Products - Equipment for Measurement of Liquid Levels in Storage Tanks - Manual Methods |