BSI - Standards NON-CEN (Active/Historical) Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 2011-2.1TA | EN-Basic Environmental Testing Procedures Part 2.1Ta: Soldering. Solderability Testing by the Wetting Balance Method | |
| BSI BS 2011-2.1TD | EN-Basic Environmental Testing Procedures Part 2.1Td: Solderability Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD)-IEC 60068-2-58: 1989; Superseded by BS EN 60068-2-5 | |
| BSI BS 2011-2.1U | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1U: Test U. Robustness of Terminations and Integral Mounting Devices-AMD 6106: November 30 1990; IEC 60068-2-21: 1983; Superseded by BS EN 60068-2-21: 19 | |
| BSI BS 2011-2.1XA | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1XA: Tests. Test XA and Guidance. Immersion in Cleaning Solvents-Renumbered as BS EN 60068-2-45: 1993; | |
| BSI BS 2011-2.1Z/ABDM | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/ABDM: Test Z/ABDM. Climatic Sequence Primarily Intended for Components-Superseded by BS EN 60068-2-61: 1994 | |
| BSI BS 2011-2.1Z/AD | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AD: Test Z/AD. Composite Temperature/Humidity Cyclic Test-IEC 60068-2-38: 1974; Superseded by BS EN 60068-2-39: 1999; | |
| BSI BS 2011-2.1Z/AFC | EN-Basic Environmental Testing Procedures Part 2.1: Tests: Part 2.1Z/AFc: Test Z/AFc Combined Cold/Vibration (Sinusoidal) Tests for Both Heat- Dissipating and Non- Heat-Dissipating Specimens-Superseded by BS EN 60068-2- | |
| BSI BS 2011-2.1Z/AM | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AM: Test Z/AM. Combined Cold/Low Air Pressure Tests-AMD 5030: February 28 1986; Superseded by BS EN 60068-2-40: 2000; | |
| BSI BS 2011-2.1Z/AMD | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/AMD: Test Z/AMD. Combined Sequential Cold Low Air Pressure and Damp Heat Test-Superseded by BS EN 60068-2-39: 1999; | |
| BSI BS 2011-2.1Z/BFC | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/BFc: Test Z/BF Combined Dry Heat/ Vibration (Sinusoidal) Tests for Both Heat- Dissipating and Non- Heat-Dissipating Specimens-IEC 60068-2-50: 1983; Sup | |
| BSI BS 2011-2.1Z/BM | EN-Basic Environmental Testing Procedures Part 2.1: Tests Part 2.1Z/BM: Test Z/BM. Combined Dry Heat/Low Air Pressure Tests-AMD 5031: February 28 1986; Superseded by BS EN 60068-2-41: 2000; | |
| BSI BS 2011-2.2C & D | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2C and D: Guidance for Damp Heat Tests Guidance-Superseded by BS EN 60068-3-4:2002 | |
| BSI BS 2011-2.2KD | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2KD: Test Kd. Guidance on Test Kd: Hydrogen Sulfide Test for Contacts and Connections | |
| BSI BS 2011-2.2KD | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2KD: Test Kd. Guidance on Test Kd: Hydrogen Sulfide Test for Contacts and Connections-IEC 60068-2-46: 1982; | |
| BSI BS 2011-2.2N | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2N: Test N. Guidance on Change of Temperature Tests-IEC 60068-2-33:1971; Superseded by BS EN 60068-2-33: 2000; | |
| BSI BS 2011-2.2SA | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Test 2.2Sa: Guidance for Solar Radiation Testing-AMD 9054: July 15 1996; IEC 60068-2-9:1975; Superseded by BS EN 60068-2-9: 2000; | |
| BSI BS 2011-2.2T | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2T: Test T. Guidance to Soldering-Superseded by BS EN 60068-2-44: 1995; | |
| BSI BS 2011-2.2Z/AFC & Z/BFC | EN-Basic Environmental Testing Procedures Part 2.2: Guidance Part 2.2Z/AFc and Z/BFc: Test Z/AFc and Z/BFc. Guidance on Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests | |
| BSI BS 2011-3 A & B SUPP 1 | EN-Basic Environmental Testing Procedures Part 3: Background Information Part 3A and B: Tests A (Cold) and Tests B (Dry Heat): Supplement No. 1:-Superseded by BS EN 60068-3-1: 1999; | |
| BSI BS 2011-3A & B | EN-Basic Environmental Testing Procedures Part 3: Background Information Part 3A and B: Tests A (Cold) and Tests B (Dry Heat)-AMD 3652: October 30 1981; Superseded by BS EN 60068-3-1: 1999; | |
| BSI BS 2011-3Z/AM & Z/BM | EN-Basic Environmental Testing Procedures Part 3: Background Information Part 3Z/AM and Z/BM: Test Z/AM and Z/BM. Combined Temperature/Low Air Pressure Tests-Superseded by BS EN 600068-3-2: 1999; | |
| BSI BS 2011-4.1 | EN-Basic Environmental Testing Procedures Part 4: Miscellaneous Section 4.1: Specification for Mounting of Components Equipment and Other Articles for Dynamic Tests-Renumbered as BS EN 60068-2-47: 1993; | |
| BSI BS 2011-4.2 | EN-Basic Environmental Testing Procedures Part 4: Miscellaneous Section 4.2: Guidance on the Application of the Tests of BS 2011 to Simulate the Effects of Storage-Superseded by BS EN 60068-2-48: 2000; | |
| BSI BS 2011-4.3 | EN-Environmental Testing Part 4: Miscellaneous Section 4.3: Guide to Seismic Test Methods for Equipments-IEC 68-3-3: 1991; Renumbered as BS EN 60068-3-3: 1993; | |
| BSI BS 2011-4.4 | EN-Environmental Testing Part 4: Miscellaneous Section 4.4: Information for Specification Writers - Test Summaries-IEC 68-4: 1987; Superseded by BS EN 60068-4: 1996; | |
| BSI BS 2011-5.1 | EN-Environmental testing - Part 5: Guide to drafting of test methods - Section 5.1 General principles | |
| BSI BS 2011-5.2 | EN-Environmental Testing Part 5: Guide to Drafting of Test Methods Section 5.2: Terms and Definitions-Superseded by BS EN 60068-5-2: 2000; | |
| BSI BS 2015 | EN-Paint and Related Terms (W) | |
| BSI BS 2015 | EN-Paint and Related Terms (AMD 9341) November 15 1996 (W)-Amd 1; | |
| BSI BS 2015 | EN-Glossary of Paint Terms-Amd 1; | |
| BSI BS 2016 | EN-Determination of the Linear Density of Textile Fibres: Gravimetric Methods | |
| BSI BS 2021 | EN-Separating and Dropping Funnels for Laboratory Use-AMD 7865: August 15 1993; Superseded by BS ISO 4800: 1998; | |
| BSI BS 2035 | EN-Specification for Cast iron flanged pipes and flanged fittings-AMD 1297: October 31 1973 | |
| BSI BS 2036 | EN-Tickings for Domestic Bedding (Including Border Fabrics)-AMD PD 5943: November 25 1966; Superseded by BS 7337: 1990; | |
| BSI BS 2037 | EN-Portable Aluminium Ladders Steps Trestles and Lightweight Stagings-AMD 5537: September 30 1987; | |
| BSI BS 2037 | EN-Portable Aluminium Ladders Steps Trestles and Lightweight Stagings-AMD 6394: September 30 1991; | |
| BSI BS 2037 | EN-Portable Aluminium Ladders Steps Trestles and Lightweight Stagings-AMD 7895: September 15 1993; | |
| BSI BS 2037 | EN-Specification for Portable aluminium ladders steps trestles and lightweight stagings-AMD 8870: October 1995; AMD 10011: June 1998 | |
| BSI BS 2037 | EN-Portable Aluminium Ladders Steps Trestles and Lightweight Stagings-AMD 8870: October 15 1995; | |
| BSI BS 2037 | EN-Portable Aluminium Ladders Steps Trestles and Lightweight Stagings | |
| BSI BS 2043 | EN-Method for the Determination of Wool Fiber Fineness by the Use of a Projection Microscope | |
| BSI BS 2044 | EN-Determination of Resistivity of Conductive and Antistatic Plastics and Rubbers (Laboratory Methods)-Superseded by BS 7506-2: 1996; | |
| BSI BS 2045 | EN-Preferred Numbers | |
| BSI BS 2047-1 | EN-Textile Machinery and Accessories - Cylindrical Sliver Cans Part 1: Specification for Dimensions | |
| BSI BS 2047-2 | EN-Textile Machinery and Accessories - Cylindrical Sliver Cans Part 2: Packaging Sliver Cans (Press Cans) | |
| BSI BS 2048-1 | EN-Dimensions of fractional horse-power motors - Part 1: Dimensions of motors for general use-AMD 1074: December 1972; | |
| BSI BS 2049 | EN-Paraffin Lighting Appliances for Domestic Use-AMD 7615: February 15 1993; | |
| BSI BS 2049 | EN-Paraffin Lighting Appliances for Domestic Use-AMD 6250: July 31 1989; | |
| BSI BS 2049 | EN-Specification for Kerosine (paraffin) lighting appliances for domestic use-AMD 2636: June 1978 | |
| BSI BS 2049 | EN-Paraffin Lighting Appliances for Domestic Use-AMD 7615: February 15 1993 | |
| BSI BS 2049 | EN-Paraffin Lighting Appliances for Domestic Use-AMD 6250: July 31 1989; AMD 7615: February 15 1993; CORR C1: May 30 2008 | |
| BSI BS 2050 | EN-Specification for Electrical resistance of conducting and antistatic products made from flexible polymeric material-AMD 4280: July 1983; AMD 4499: May 15 1984 | |
| BSI BS 2051-1 | EN-Specification for Tube and pipe fittings for engineering purposes - Part 1: Copper and copper alloys capillary and compression tube fittings for engineering purposes-AMD 1888: February 1976; AMD 2277: May 15 1977 | |
| BSI BS 2051-2 | EN-Tube and Pipe Fittings for Engineering Purposes Part 2: Specification for Olive Type Copper Alloy Compression Tube Fittings | |
| BSI BS 2052 | EN-Ropes Made from Manila Sisal Hemp Cotton and Coir-Superseded by BS EN 698: 1995 BS EN 701: 1995 and BS EN 1261: 1995; | |
| BSI BS 2054 | EN-Augers and Auger Bits-AMD PD 4011: December 5 1960; | |
| BSI BS 2055 | EN-Diagnostic Rubber Fingerstalls-AMD PD 3145: July 29 1958; | |
| BSI BS 2056 | EN-Stainless Steel Wire for Mechanical Springs-Superseded by BS EN 10270-3: 2001; | |
| BSI BS 2058 | EN-Specification for Lunge-Rey Weighing Pipette | |
| BSI BS 2059 | EN-Straight-sided splines and serrations-AMD 1843: April 1954; Supersedes BS 46: Part 2: 1929 BS 5015: 1927 BS A 19: Part 1: 1941 BS A 19: Part 2: 1942 and BS A 20: 1942; | |
| BSI BS 2059/1 | EN-Summary Sheets: 1: Straight-Sided Splines- Bottom Fitting Shallow (Extracted from BS 2059: 1953) | |
| BSI BS 2059/2 | EN-Summary Sheets: 2: Straight-Sided Spines. Bottom Fitting Deep (Extracted from BS 2059: 1953) | |
| BSI BS 2059/3 | EN-Summary Sheets: 3: Straight-Sided Serrations. Internal and External (Extracted from BS 2059: 1953) | |
| BSI BS 2061 | EN-Specification Phosphor bronze spring washers for general engineering purposes-AMD 1815: February 1954; AMD 1877: January 1976; | |
| BSI BS 2062-1 | EN-Gear Hobs Part 1: Hobs for General Purposes 1 d.p. tp 20 d.p. Inclusive-AMD PD 4015: December 15; 1960; Replaced by BS 5221:1975 but remains current | |
| BSI BS 2062-2 | EN-Gear Hobs Part 2: Hobs for Gears for Turbine Reduction and Similar Drives-Replaced by BS 5221:1975 but remains current until international agreement is reached on tolerances; | |
| BSI BS 2064-1 | EN-Diamond Abrasive Products Part 1: Diamond Abrasive Grinding Wheels-AMD 5935: May 31 1989; | |
| BSI BS 2064-2 | EN-Diamond Abrasive Products Part 2: Diamond Abrasive Circular Saws and Frame Saws | |
| BSI BS 2064-3 | EN-Diamond Abrasive Products Part 3: Dimensions of Steel Blades for Segmented Saws for Cutting of Stone and Masonry-Superseded by Parts 1 & 2 of BS ISO 6105:2004 | |
| BSI BS 2067 | EN-Determination of Power-factor and permittivity of insulating materials - (Hartshorn & ward method)-AMD 1838: March 1954; AMD 5192: March 1964; AMD 5233: April 1987 | |
| BSI BS 2068 | EN-Acetic Anhydride | |
| BSI BS 2068 | EN-Acetic Anhydride-AMD 7627: May 15 1993; | |
| BSI BS 2069 | EN-Gas Sampling Tubes | |
| BSI BS 2071 | EN-Specification for Soxhlet extractors | |
| BSI BS 2075 | EN-Chains and Chainwheels for Slat Conveyors-AMD 3087: October 31 1979; Superseded by BS 5801: 1979; | |
| BSI BS 2080 | EN-Face-to-Face Centre-to-Face End-o-End and Centre-to-End Dimensions of Valves-AMD 8434: May 15 1995; Superseded by BS EN 558-1: 1996 BS EN 558-2: 1996 and BS EN 12627: 1999; | |
| BSI BS 2080 | EN-Face-to-Face Centre-to-Face End-to-End and Centre-to-End Dimensions of Valves-Supersedes BS 2080: 1974; Superseded by BS EN 558-1: 1996 BS EN 558-2: 1996 and BS EN 12627: 1999; | |
| BSI BS 2081-1 | EN-Closets for Use with Chemicals Part 1: Portable and Transportable Types | |
| BSI BS 2081-1 | EN-Closets for use with chemicals - Part 1: Specification for portable closets |