BSI - Materials Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 4483 | EN-Steel Fabric for the Reinforcement of Concrete - Specification-AMD 17105: April 30 2007 | |
| BSI BS 4496 | EN-Determination of Acid-Insoluble Ash in Pulp | |
| BSI BS 4497 | EN-Recommendations for the Detection and Estimation of Nitrogenous Treating Agents in Paper | |
| BSI BS 4499 | EN-Determination of Alkali Solubility of Pulp | |
| BSI BS 4549-1 | EN-Quality control requirements for reinforced plastic mouldings Part 1. Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings | |
| BSI BS 4637 | EN-Carbon Steel Wire for Coiled Springs (Bedding and Seating) (AMD 7609) June 15 1993 (V)-Amd 3; | |
| BSI BS 4638 | EN-Carbon Steel Wire for Zigzag and Square-Form Springs (AMD 7610) June 15 1993 (V)-Amd 2; | |
| BSI BS 4728 | EN-Determination of the Resistance to Constant Internal Pressure of Thermoplastics Pipe | |
| BSI BS 4816 | EN-Method for Determination of the Puncture Resistance of Board-Amd 4350:July 1983 | |
| BSI BS 4817 | EN-Method for Determination of the Thickness of Corrugated Fibreboard-AMD 4351: July 1983 | |
| BSI BS 4818 | EN-Method for Determination of the Creasing Quality of Carton Board (PIRA Method) | |
| BSI BS 4835 | EN-Method of Test for Plasticizer Esters | |
| BSI BS 4840-1 | EN-Rigid Polyurethane (PUR) Foam in Slab Form Part 1: PUR Foam for Use in Transport Containers and Insulated Vehicle Bodies | |
| BSI BS 4840-2 | EN-Rigid Polyurethane (PUR) Foam in Slab Form Part 2: Specification for PUR Foam for Use in Refrigerator Cabinets Cold Rooms and Stores (V) | |
| BSI BS 4896 | EN-Determination of Ash Pulp | |
| BSI BS 4965 | EN-Decorative Laminated Plastics Sheet Veneered Boards and Panels | |
| BSI BS 4978 | EN-Visual strength grading of softwood - Specification | |
| BSI BS 5046 | EN-Method for The Estimation of Equivalent Diameters in the Heat Treatment of Steel | |
| BSI BS 5139 | EN-Method of Specifying General Purpose Polypropylene and Propylene Copolymer Materials for Moulding and Extrusion | |
| BSI BS 5176 | EN-Classification system for vulcanized rubbers - Specification | |
| BSI BS 5288 | EN-Sealed Radioactive Sources | |
| BSI BS 5293 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry-(AMD 6378) May 31 1991 | |
| BSI BS 5293-1 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 1: Methods of Sampling (ISO 1124: 1988) | |
| BSI BS 5293-11 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 11: Method for Determination of Specific Surface Area by Nitrogen Adsorption Using Single-Point Procedures (ISO 4652-1: 1994) (V) | |
| BSI BS 5293-2 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 2: Method for Determination of Pour Density (ISO 1306: 1995) (V)-ISO 1306:1995 | |
| BSI BS 5293-20 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 20: Method for Evaluation in Styrene-Butadiene Rubbers (ISO 3257: 1992) | |
| BSI BS 5293-21 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 21: Classification System for Carbon Blacks Used in Rubber Products (ISO/TR 12245: 1994) (V) | |
| BSI BS 5293-3 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 3: Method for Determination of Fines Dontent (ISO 1435: 1996) (V) | |
| BSI BS 5293-4 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry Part 4: Method for Determination of Pellet Size Distribution-ISO 8511:1995 | |
| BSI BS 5293-7 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry - Part 7: Method for Determination of Ash Content-ISO 1125:1999; | |
| BSI BS 5293-8 | EN-Sampling and Testing Carbon Black for Use in the Rubber Industry - Part 8: Method for Determination of Dust Content-ISO 11234:1995 | |
| BSI BS 5383 | EN-Material Identification of Steel Nickel Alloy and Titanium Alloy Tubes by Continuous Character Marking and Colour Coding of Steel Tubes | |
| BSI BS 5409-1 | EN-Specification for Nylon Tubing Part 1: Fully Placticized Nylon Tubing Types 11 and 12 for Use Primarily in Pneumatic Installations-Amd 1; | |
| BSI BS 5409-2 | EN-Specification for Nylon tubing - Part 2: Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry | |
| BSI BS 5421-1 | EN-Methods of Test for Elastometric Threads Part 1: Rubber Threads | |
| BSI BS 5421-2 | EN-Methods of Test for Elastometric Threads Part 2: Polyurethane Thread (Elastane Yarn) | |
| BSI BS 5600-1.1 | EN-Powder Metallurgical Materials and Products Part 1: General Information Section Section 1.1: Introduction and Contents | |
| BSI BS 5710 | EN-Macroscopic Assessment of the Content of Non-Metallic Inclusions in Wrought Steels | |
| BSI BS 5734-5 | EN-Polyester Moulding Compounds for Electrical and Other Purposes Part 5: Sheet Moulding Compounds for Mechanical Purposes | |
| BSI BS 5756 | EN-Visual grading of hardwood - Specification | |
| BSI BS 5804 | EN-Method of Visual Classification for Muscovite Mica Blocks Thins and Films (ISO 2185: 1972) | |
| BSI BS 5805 | EN-Method for Thermal Classification for Phlogopite Mica Splittings | |
| BSI BS 5806 | EN-Method of Measurement of Thickness for Mica Blocks Thins Films and Splittings | |
| BSI BS 5884 | EN-Magnetic materials - Methods for the determination of the relative magnetic permeability of feebly magnetic materials | |
| BSI BS 5909 | EN-Scale Adhesion Test for Oxygen-Free Copper | |
| BSI BS 5923-2 | EN-Methods for Chemical analysis of rubber - Part 2: EDTA titrimetric method for determination of zinc content of rubber products-Partially Supersedes BS 903 Part B13: 1964 | |
| BSI BS 5946 | EN-Determination of the Punking Behaviour of Phenolformaldehyde Foam | |
| BSI BS 6014 | EN-Ethylene propylene rubber compounds - Specification-CORR 14585: September 4 2003; | |
| BSI BS 6043-1-1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Alumnium Manufacture - Part 1: Electrode Pitch - Section 1.1: Sampling-ISO 6257: 2002; | |
| BSI BS 6043-1-7 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.7: Determination of Apparent Density (Bouyancy Method) | |
| BSI BS 6043-1.10 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 1: Electrode pitch - Section 1.10: Determination of volatile matter content-ISO 12977: 1999 | |
| BSI BS 6043-1.11 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 1: Electrode pitch - Section 1.11: Determination of the atomic C/H ratio of the quinoline-insoluble material-ISO 12979: | |
| BSI BS 6043-1.12 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.12: Determination of Mesophase Content | |
| BSI BS 6043-1.13 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 1: Electrode pitch - Section 1.13: Determination of sulfur content-ISO 10238: 1999 | |
| BSI BS 6043-1.2 | EN-Methods of sampling and test for Carbonaceous materials used in aluminium manufacture - Part 1: Electrode pitch - Section 1.2 Determination of water content (Dean and Stark method) | |
| BSI BS 6043-1.3 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.3: Determination of Softening Point (Ring and Ball Method) | |
| BSI BS 6043-1.4 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.4: Determination of Content of Toluene-Insoluble Material | |
| BSI BS 6043-1.5 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.5: Determination of Content of Quinoline-Insoluble Material | |
| BSI BS 6043-1.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Alumnium Manufacture - Part 1: Electrode Pitch - Section 1.6: Determination of Coking Value-CORR 10644 April 2000; ISO 6998: 1997; | |
| BSI BS 6043-1.8 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.8: Determination of Ash | |
| BSI BS 6043-1.9 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.9: Determination of Sulphur Content (Bomb Method) | |
| BSI BS 6043-2.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.1: Sampling | |
| BSI BS 6043-2.10 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.10: Determination of Electrical Resistivity of Calcined Coke Granules (ISO 10143: 1995) (V) | |
| BSI BS 6043-2.11 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.11: Determination of Volatile Matter Content (ISO 9406: 1995) (V) | |
| BSI BS 6043-2.12 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.12: Determination of Particle Size Distribution of Fine Coke (V) | |
| BSI BS 6043-2.13 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.13: Determination of Tapped Bulk Density of Green and Calcined Coke | |
| BSI BS 6043-2.15 | EN-Methods of Sampling and Test for Carbonaceous Materials for Use in Aluminium Manufacture; Part 2: Electrode Coke; Section 2.15: Determination of Grain Stability of Calcined Coke Using a Laboratory Vibration Mill-ISO | |
| BSI BS 6043-2.16 | EN-Methods of Sampling and Test for Carbonaceous Materials for Use in Aluminium Manufacture - Part 2: Electrode Coke - Section 2.16: Determination of Water Content of Calcined Coke-ISO 11412: 1998; | |
| BSI BS 6043-2.18 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2: Electrode coke - Section 2.18: Determination of total sulfur by the Eschka method-ISO 5931: 2000 | |
| BSI BS 6043-2.20.1 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2: Electrode coke - Section 2.20: Carboxy reactivity of calcined coke - Subsection 2.20.1: Determination of the react | |
| BSI BS 6043-2.21.1 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture Part 2: Electrode coke Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by dete | |
| BSI BS 6043-2.3 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2: Electrode coke - Section 2.3 Determination of trace elements in green and calcined coke by flame atomic absorption s | |
| BSI BS 6043-2.4 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2: Electrode coke Section 2.4: Analysis by X-ray flourescence spectroscopy-ISO 12980: 2000 | |
| BSI BS 6043-2.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.6: Determination of the Density in Xylene of Calcined Coke | |
| BSI BS 6043-2.7 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.7: Determination of the Apparent Oil Content of Calcined Cokes (Gravimetric Method) | |
| BSI BS 6043-2.8 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.8: Determination of Oil Content by Solvent Extraction of Calcined Coke | |
| BSI BS 6043-2.9 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2.9: Electrode coke - Determination of particle size distribution-ISO 12984: 2000 | |
| BSI BS 6043-3.1.1 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.1: Sampling - Subsection 3.1.1: Sampling of cathodes-ISO 8007-1: 1999 | |
| BSI BS 6043-3.1.2 | EN-Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.1: Sampling - Subsection 3.1.2: Sampling of anodes-ISO 8007-2: 1999 |