BSI - Materials Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS ISO 10059-2 | EN-Dense shaped refractory products Determination of cold compressive strength Part 2: Test with packing | |
| BSI BS ISO 10113 | EN-Metallic materials Sheet and strip Determination of plastic strain ratio | |
| BSI BS ISO 10204 | EN-Iron ores Determination of magnesium Flame atomic absorption spectrometric method-:1993 | |
| BSI BS ISO 10275 | EN-Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent | |
| BSI BS ISO 10371 | EN-Fibre reinforced plastics - Braided tapes for composite materials reinforcement - Basis for a specification | |
| BSI BS ISO 10378 | EN-Copper lead and zinc sulfide concentrates Determination of gold and silver Fire assay gravimetric and flame atomic absorption spectrometric method | |
| BSI BS ISO 10638 | EN-Rubber - Identification of antidegradants by gas chromatography/mass spectrometry | |
| BSI BS ISO 10679 | EN-Steel - Cast tool steel-CORR: July 31 2010 | |
| BSI BS ISO 10713 | EN-Jewellery - Gold alloy coatings | |
| BSI BS ISO 11089 | EN-Rubber raw synthetic - Determination of antidegradants by high-performance liquid chromatography | |
| BSI BS ISO 11235 | EN-Rubber Compounding Ingredients - Sulfenamide Accelerators - Test Methods | |
| BSI BS ISO 1126 | EN-Rubber compounding ingredients - Carbon black - Determination of loss on heating | |
| BSI BS ISO 11323 | EN-Iron ore and direct reduced iron - Vocabulary | |
| BSI BS ISO 11344 | EN-Rubber raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography-CORR: September 30 2008 | |
| BSI BS ISO 11345 | EN-Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods | |
| BSI BS ISO 11357-2 | EN-Plastics - Differential Scanning Calorimetry (DSC) - Part 2: Determination of Glass Transition Temperature | |
| BSI BS ISO 11357-3 | EN-Plastics - Differential Scanning Calorimetry (DSC) - Part 3: Determination of Temperature and Enthalpy of Melting and Crystallization | |
| BSI BS ISO 11357-4 | EN-Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity | |
| BSI BS ISO 11357-5 | EN-Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times enthalpy of reaction and degree of conversion | |
| BSI BS ISO 11357-6 | EN-Plastics - Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | |
| BSI BS ISO 11357-7 | EN-Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics | |
| BSI BS ISO 11358-2 | EN-Plastics Thermogravimetry (TG) of polymers Part 2: Determination of activation energy | |
| BSI BS ISO 11359-1 | EN-Plastics - Thermomechanical Analysis (TMA) - Part 1: General Principles | |
| BSI BS ISO 11359-2 | EN-Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature | |
| BSI BS ISO 11359-3 | EN-Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature | |
| BSI BS ISO 1138 | EN-Rubber compounding ingredients - Carbon black - Determination of sulfur content | |
| BSI BS ISO 11438-1 | EN-Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 1. General Requirements and Sample Dissolution | |
| BSI BS ISO 11438-2 | EN-Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 2. Determination of Lead Content | |
| BSI BS ISO 11438-3 | EN-Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 3. Determination of Antimony Content | |
| BSI BS ISO 11438-4 | EN-Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 4: Determination of tin content | |
| BSI BS ISO 11438-5 | EN-Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 5. Determination of Tellurium Content | |
| BSI BS ISO 11438-6 | EN-Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 6: Determination of thallium content | |
| BSI BS ISO 11438-7 | EN-Ferronickel - Determination of Trace-Element Content by Electrothermal Atomic Absorption Spectrometric Method Part 7. Determination of Silver Content | |
| BSI BS ISO 11438-8 | EN-Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 8: Determination of indium content | |
| BSI BS ISO 11443 | EN-Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers-Supersedes BS 2782-7:Method 722B:1996 | |
| BSI BS ISO 11455 | EN-Raw Optical Glass - Determination of Birefringence (V) | |
| BSI BS ISO 11533 | EN-Iron ores - Determination of cobalt - Flame atomic absorption spectrometric method | |
| BSI BS ISO 11534 | EN-Iron ores - Determination of tin - Flame atomic absorption spectrometric method | |
| BSI BS ISO 11556 | EN-Paper and board - Determination of curl using a single vertically suspended test piece | |
| BSI BS ISO 11566 | EN-Carbon Fibre - Determination of the Tensile Properties of Single-Filament Specimens | |
| BSI BS ISO 11567 | EN-Carbon fibre - Determination of filament diameter and cross-sectional area | |
| BSI BS ISO 11605 | EN-Paper and Board - Calibration of Variable-Area Flowmeters (V) | |
| BSI BS ISO 11752 | EN-Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts-AMD 17089: May 31 2007 | |
| BSI BS ISO 11873 | EN-Hardmetals Determination of sulfur and carbon contents in cobalt metal powders Infrared detection method | |
| BSI BS ISO 11877 | EN-Hardmetals - Determination of silicon in cobalt metal powders - Photometric method | |
| BSI BS ISO 11907-1 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 1: Guidance | |
| BSI BS ISO 11907-2 | EN-Plastics - Smoke generation - Determination of the corrosivity of fire effluents Part 2. Static method | |
| BSI BS ISO 11907-3 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 3: Dynamic Decomposition Method Using a Travelling Furnace | |
| BSI BS ISO 11907-4 | EN-Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a Conical Radiant Heater | |
| BSI BS ISO 11971 | EN-Steel and iron castings - Visual examination of surface quality | |
| BSI BS ISO 12000 | EN-Plastics/Rubber - Polymer Dispersions and Rubber Latices (Natural and Synthetic) - Definitions and Review of Test Methods | |
| BSI BS ISO 12107 | EN-Metallic materials Fatigue testing Statistical planning and analysis of data-Supersedes BS 3518-5:1996; | |
| BSI BS ISO 12108 | EN-Metallic materials - Fatigue testing - Fatigue crack growth method | |
| BSI BS ISO 123 | EN-Rubber latex - Sampling-Supersedes BS 6057-2: 1987; | |
| BSI BS ISO 124 | EN-Latex rubber - Determination of total solids content | |
| BSI BS ISO 125 | EN-Natural rubber latex concentrate - Determination of alkalinity | |
| BSI BS ISO 126 | EN-Natural rubber latex concentrate - Determination of dry rubber content | |
| BSI BS ISO 1268-1 | EN-Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions | |
| BSI BS ISO 1268-10 | EN-Fibre-reinforced plastics Methods of producing test plates Part 10: Injection moulding of BMC and other long-fibre moulding compounds General principles and moulding of multipurpose test specimens | |
| BSI BS ISO 1268-11 | EN-Fibre-reinforced plastics Methods of producing test plates Part 11: Injection moulding of BMC and other long-fibre moulding compounds Small plates | |
| BSI BS ISO 1268-2 | EN-Fibre-reinforced plastics Methods of producing test plates Part 2: Contact and spray-up moulding | |
| BSI BS ISO 1268-3 | EN-Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding-AMD 13342: September 19 2001 | |
| BSI BS ISO 1268-4 | EN-Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs | |
| BSI BS ISO 1268-5 | EN-Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 5: Filament Winding-Supersedes BS ISO 9291:1996; | |
| BSI BS ISO 1268-6 | EN-Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 6: Pultrusion Moulding | |
| BSI BS ISO 1268-7 | EN-Fibre-Reinforced Plastics - Methods of Producing Test Plates - Part 7: Resin Transfer Moulding | |
| BSI BS ISO 1268-8 | EN-Fibre-reinforced plastics Methods of producing test plates Part 8: Compression moulding of SMC and BMC | |
| BSI BS ISO 1268-9 | EN-Fibre-reinforced plastics Methods of producing test plates Part 9: Moulding of GMT/STC | |
| BSI BS ISO 12742 | EN-Copper lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method | |
| BSI BS ISO 12744 | EN-Copper lead zinc and nickel concentrates - Experimental methods for checking the precision of sampling | |
| BSI BS ISO 12745 | EN-Copper lead and zinc ores and concentrates - Precision and bias of mass measurement techniques | |
| BSI BS ISO 12775 | EN-Guidelines on types of glass of normal bulk-production composition and their test methods | |
| BSI BS ISO 12965 | EN-Butadiene Rubber - Determination of Microstructure by Infra-Red Spectrometry | |
| BSI BS ISO 12992 | EN-Plastics - Vertical flame spread determination for film and sheet | |
| BSI BS ISO 13003 | EN-Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions | |
| BSI BS ISO 1304 | EN-Rubber compounding ingredients Carbon black Determination of iodine adsorption number-:2001 | |
| BSI BS ISO 132 | EN-Rubber vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) | |
| BSI BS ISO 13226 | EN-Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers-CORR: December 31 2007 | |
| BSI BS ISO 13310 | EN-Iron Ores - Determination of Zinc Content - Flame Atomic Absorption Spectrometric Method |