BSI - Materials Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN 577 | EN-Aluminium and Aluminium Alloys - Liquid Metal - Specifications (V) | |
| BSI BS EN 579 | EN-Plastics Piping Systems - Crosslinked Polyethylene (PE - X) Pipes - Determination of Degree of Crosslinking by Solvent Extraction (V) | |
| BSI BS EN 580 | EN-Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) | |
| BSI BS EN 586-1 | EN-Aluminium and Aluminium Alloys - Forgings Part 1: Technical Conditions for Inspection and Delivery | |
| BSI BS EN 586-2 | EN-Aluminium and Aluminium Alloys - Forgings Part 2: Mechanical Properties and Additional Property Requirements (V) | |
| BSI BS EN 586-3 | EN-Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form | |
| BSI BS EN 601 | EN-Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff | |
| BSI BS EN 60118-14 | EN-Hearing Aids - Part 14: Specification of a Digital Interface Device-IEC 60118-14: 1998; | |
| BSI BS EN 602 | EN-Aluminium and aluminium alloys Wrought products Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff | |
| BSI BS EN 603-1 | EN-Aluminium and Aluminium Alloys - Wrought Forging Stock Part 1: Technical Conditions for Inspection and Delivery-Partially Supersedes BS 1472: 1972; | |
| BSI BS EN 603-2 | EN-Aluminium and Aluminium Alloys - Wrought Forging Stock Part 2: Mechanical Properties-Partially Supersedes BS 1472: 1972; | |
| BSI BS EN 603-3 | EN-Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 3: Tolerances on Dimensions and Form-Supersedes BS 4300-11:1969; | |
| BSI BS EN 60320-1 + A1 | EN-Appliance couplers for household and similar general purposes Part 1: General requirements-AMD: September 30 2008 | |
| BSI BS EN 604-1 | EN-Aluminium and Aluminium Alloys - Cast Forging Stock Part 1: Technical Conditions for Inspection and Delivery-Replaces Some Sections of BS 1472: 1972; | |
| BSI BS EN 604-2 | EN-Aluminium and Aluminium Alloys - Cast Forging Stock Part 2: Tolerances on Dimensions and Form | |
| BSI BS EN 60404-14 | EN-Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method | |
| BSI BS EN 60534-1 | EN-Industrial-process control valves Part 1: Control valve terminology and general considerations-CORR 15662: April 19 2005 | |
| BSI BS EN 60674-1 | EN-Specification for Plastic Films for Electrical Purposes - Part 1: Definitions and General Requirements-AMD 10058: July 1998 | |
| BSI BS EN 60889 | EN-Hard Drawn Aluminium Wire for Overhead Line Conductors | |
| BSI BS EN 610 | EN-Tin and Tin Alloys - Ingot Tin (V) | |
| BSI BS EN 61061-3-1 | EN-Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Sheets Produced from Beech Veneer-IEC 61061-3-1: 1998; | |
| BSI BS EN 61068-1 | EN-Polyester Fibre Woven Tapes Part 1: Definitions Designation and General Requirements-Supersedes BS 7809: Part 1: 1995; IEC 61068-1: 1991; | |
| BSI BS EN 61068-2 | EN-Polyester Fibre Woven Tapes Part 2: Methods of Test-Supersedes BS 7809: Part 2: 1995; IEC 61068-2: 1991; | |
| BSI BS EN 61068-3-1 | EN-Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Tapes Woven on Conventional or Shuttleless Looms-CORR 10781; June 2000; IEC 1068-3-1: 1995; | |
| BSI BS EN 611-1 | EN-Tin and Tin Alloys - Pewter and Pewterware Part 1: Pewter-BS 5140: 1974 Superseded by BS EN 611: Part 2: 1997 Together with BS EN 611: Part 1: 1996; | |
| BSI BS EN 611-2 | EN-Tin and Tin Alloys - Pewter and Pewterware Part 2: Pewterware-BS EN 611: Part 2: 1997 Together with BS EN 611: Part 1: 1996 Supersedes BS 5140: 1974; | |
| BSI BS EN 61212-3-3 | EN-Insulating materials Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Round laminated moulded rods | |
| BSI BS EN 622-1 | EN-Fibreboards Specifications Part 1: General requirements | |
| BSI BS EN 622-3 | EN-Fibreboards Specifications Part 3: Requirements for medium boards | |
| BSI BS EN 622-4 | EN-Fibreboards - Specifications Part 4: Requirements for softboards | |
| BSI BS EN 622-5 | EN-Fibreboards - Specifications Part 5: Requirements for dry process boards (MDF) | |
| BSI BS EN 62289 | EN-Video recording Helical-scan digital video cassette recording format using 1265 mm magnetic tape and incorporating MPEG-2 compression Format D-10 | |
| BSI BS EN 623-1 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties Part 1: Determination of the Presence of Defects by Dye Penetration | |
| BSI BS EN 623-2 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties Part 2: Determination of Density and Porosity (V) | |
| BSI BS EN 623-3 | EN-Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)-Supersedes DD ENV 623-3:19 | |
| BSI BS EN 623-4 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness | |
| BSI BS EN 623-5 | EN-Advanced technical ceramics - Monolithic ceramics - General and textural properties Part 5: Determination of phase volume fraction by evaluation of micrographs | |
| BSI BS EN 634-1 | EN-Cement-Bonded Particle Boards - Specification Part 1: General Requirements (V) | |
| BSI BS EN 635-1 | EN-Plywood - Classification by Surface Appearance Part 1: General-Partially Replaces BS 6566: Part 6: 1985; | |
| BSI BS EN 635-2 | EN-Plywood - Classification by Surface Appearance Part 2: Hardwood-AMD 9124: June 1996; Supersedes BS 6566: Part 6: 1985; | |
| BSI BS EN 635-3 | EN-Plywood - Classification by Surface Appearance Part 3: Softwood-AMD 9125: June 15 1996; Supersedes BS 6566: Part 6: 1985 | |
| BSI BS EN 635-5 | EN-Plywood - Classification by Surface Appearance - Part 5: Methods for Measuring and Expressing Characteristics and Defects | |
| BSI BS EN 636 | EN-Plywood Specifications-Supersedes BS EN 636-1: 1997; BS EN 636-2: 1997 and BS EN 636-3: 1997; | |
| BSI BS EN 637 | EN-Plastics Piping Systems - Glass-Reinforced Plastics Components - Determination of the Amounts of Constituents Using the Gravimetric Method-Also Known as BS 2782-12: METH 1205A: 1995 | |
| BSI BS EN 656 | EN-Gas-fired central heating boilers Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW-AMD 16533: September 29 2006; Partially Supersedes BS 5978-1 BS 5978-2 and BS 5978-3: 1989 | |
| BSI BS EN 658-1 | EN-Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 1: Determination of Tensile Properties-Supersedes DD ENV 658-1: 1993; | |
| BSI BS EN 658-2 | EN-Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties | |
| BSI BS EN 658-3 | EN-Advanced Technical Ceramics Mechanical Properties of Ceramic Composites at Room Temperature Part 3: Determination of Flexural Strength-Supersedes DD ENV 658-3: 1993; | |
| BSI BS EN 658-4 | EN-Advanced technical ceramics Mechanical properties of ceramic composites at room temperature Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens-Supersedes DD ENV 65 | |
| BSI BS EN 658-5 | EN-Advanced technical ceramics Mechanical properties of ceramic composites at room temperature Part 5: Determination of interlaminar shear strength by short span bend test (three points)-Supersedes DD ENV 658-5:1993; | |
| BSI BS EN 683-1 | EN-Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery | |
| BSI BS EN 683-2 | EN-Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties | |
| BSI BS EN 683-3 | EN-Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form | |
| BSI BS EN 712 | EN-Thermoplastics Piping Systems - End-Load Bearing Mechanical Joints Between Pressure Pipes and Fittings - Test Method for Resistance to Pull-Out Under Constant Longitudinal Force(V) | |
| BSI BS EN 713 | EN-Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending-AMD 8876: October 15 1995; Also K | |
| BSI BS EN 714 | EN-Thermoplastics Piping Systems - Non-End- Load-Bearing Elastomeric Sealing Ring Type Joints Between Pressure Pipes and Moulded Fittings - Test Method for Leaktightness Under Internal Hydrostatic Pressure Without End T | |
| BSI BS EN 715 | EN-Thermoplastics Piping Systems - End-Load- Bearing Joints Between Small Diameter Pressure Pipes and Fittings - Test Method for Leaktightness Under Internal Water Pressure Including End Thrust(V) | |
| BSI BS EN 717-1 | EN-Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method-Supersedes DD ENV 717-1:1999 | |
| BSI BS EN 717-2 | EN-Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method-CORR 14072: December 9 2002; | |
| BSI BS EN 717-3 | EN-Wood-Based Panels - Determination of Formaldehyde Release Part 3: Formaldehyde Release by the Flask Method (R) | |
| BSI BS EN 723 | EN-Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings | |
| BSI BS EN 725-1 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina | |
| BSI BS EN 725-10 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 10: Determination of Compaction Properties | |
| BSI BS EN 725-11 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering | |
| BSI BS EN 725-12 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia | |
| BSI BS EN 725-2 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate | |
| BSI BS EN 725-3 | EN-Advanced technical ceramics - Methods of test for ceramic powders Part 3: Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas | |
| BSI BS EN 725-4 | EN-Advanced technical ceramics Methods of test for ceramic powders Part 4: Determination of oxygen content in aluminium nitride by XRF analysis-:1994 | |
| BSI BS EN 725-5 | EN-Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution | |
| BSI BS EN 725-8 | EN-Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density | |
| BSI BS EN 725-9 | EN-Advanced technical ceramics Methods of test for ceramic powders Part 9: Determination of un-tapped bulk density | |
| BSI BS EN 727 | EN-Plastics Piping and Ducting Systems - Thermoplastics Pipes and Fittings - Determination of Vicat Softening Temperature (VST)-Also Known as BS 2782-11:Method 1103V:1995 | |
| BSI BS EN 728 | EN-Plastics Piping and Ducting Systems - Polyolefin Pipes and Fittings - Determination of Oxidation Induction Time-Also Known as BS 2782: Part 11: Method 1103D: 1997 | |
| BSI BS EN 736-1 | EN-Valves - Terminology Part 1: Definition of Types of Valves (V) | |
| BSI BS EN 736-3 | EN-Valves - Terminology - Part 3: Definition of terms | |
| BSI BS EN 744 | EN-Plastics Piping and Ducting Systems - Thermoplastics Pipes - Test Method for Resistance to External Blows by the Round-the-Clock Method (V) | |
| BSI BS EN 754-1 | EN-Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery | |
| BSI BS EN 754-2 | EN-Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties | |
| BSI BS EN 754-3 | EN-Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars tolerances on dimensions and form |