BSI - Materials Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS EN 2573 | EN-Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm Less than or equal to 780 MPa - Wire - 025 mm Less than or equal to De Less than or equal to 3 mm | |
| BSI BS EN 25754 | EN-Sintered Metal Materials Excluding Hardmetals - Unnotched Impact Test Piece (ISO 5754: 1978) (V) | |
| BSI BS EN 26501 | EN-Ferronickel - Specification and Delivery Requirements (ISO 6501: 1988) (AMD 7390) September 15 1992-Amd 1; | |
| BSI BS EN 275 | EN-Wood Preservatives - Determination of the Protective Effectiveness Against Marine Borers | |
| BSI BS EN 27627-1 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 1: General Requirements (ISO 7627-1: 1983) (V) | |
| BSI BS EN 27627-2 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 2: Determination of Calcium Potassium Magnesium and Sodium in Contents from 0.001 to 0.02 % (m/m) (ISO 7627-2: 1983) (V) | |
| BSI BS EN 27627-3 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 3: Determination of Cobalt Iron Manganese and Nickel in Contents from 0.01 to 0.5 % (m/m) (ISO 7627-3: 1983) (V) | |
| BSI BS EN 27627-4 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 4: Determination of Molybdenum Titanium and Vanadium in Contents from 0.01 to 0.5 % (m/m) (ISO 7627-4: 1983) (V) | |
| BSI BS EN 27627-5 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 5: Determination of Cobalt Iron Manganese Molybdenum Nickel Titanium and Vanadium in Contents from 0.5 to 2 % (m/m) (ISO 7627-5: 1985) | |
| BSI BS EN 27627-6 | EN-Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry Part 6: Determination of Chromium in Contents from 0.01 to 2 % (m/m) (ISO 7627-6: 1985)(V) | |
| BSI BS EN 278 | EN-Rubber Materials for Diaphragms in Domestic Appliances Using Combustible Gases up to 200 mbar | |
| BSI BS EN 279 | EN-Homogenous Rubber Materials for Dynamic Seals in Domestic Appliances Using Combustible Gases up to 200 mbar | |
| BSI BS EN 27963 | EN-Specification for Calibration block No. 2 for ultrasonic examination of welds | |
| BSI BS EN 28049 | EN-Ferronickel Shot - Sampling for Analysis | |
| BSI BS EN 28050 | EN-Ferronickel Ingots or Pieces - Sampling for Analysis (ISO 8050: 1988) | |
| BSI BS EN 28233 | EN-Thermoplastics Valves - Torque - Test Method (ISO 8233: 1988) | |
| BSI BS EN 28659 | EN-Thermoplastics Valves - Fatigue Strength - Test Method (ISO 8659: 1989) | |
| BSI BS EN 291 | EN-Rubber Seals - Static Seals in Domestic Appliances for Combustible Gas up to 200 mbar - Specification for Material | |
| BSI BS EN 300 | EN-Oriented Strand Boards (OSB) Definitions classification and specifications | |
| BSI BS EN 302-6 | EN-Adhesives for load-bearing timber structures Test methods Part 6: Determination of the conventional pressing time | |
| BSI BS EN 309 | EN-Particleboards Definition and classification | |
| BSI BS EN 312 | EN-Particleboards - Specifications | |
| BSI BS EN 313-1 | EN-Plywood - Classification and Terminology Part 1: Classification (V) | |
| BSI BS EN 313-2 | EN-Plywood - Classification and Terminology - Part 2: Terminology | |
| BSI BS EN 314-1 | EN-Plywood - Bonding Quality Part 1: Test Methods | |
| BSI BS EN 31427 | EN-Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide-AMD 8736: September 15 1995; ISO 11427: 1993; | |
| BSI BS EN 315 | EN-Plywood - Tolerances for Dimensions | |
| BSI BS EN 318 | EN-Wood Based Panels - Determination of Dimensional Changes Associated with Changes in Relative Humidity | |
| BSI BS EN 3207 | EN-Rubber Compounds - Technical Specification | |
| BSI BS EN 326-2 | EN-Wood-based panels Sampling cutting and inspection Part 2: Quality control in the factory-CORR 13318:November 202001; CORR 16562:September 29 2006 | |
| BSI BS EN 335-1 | EN-Durability of wood and wood-based products Definitions of use classes Part 1: General | |
| BSI BS EN 335-3 | EN-Durability of Wood and Wood-Based Products - Definition of Hazard Classes of Biological Attack Part 3: Application to Wood-Based Panels (V) | |
| BSI BS EN 336 | EN-Structural timber - Sizes permitted deviations-CORR 14533: July 2 2003; AMD 16208: March 2006 | |
| BSI BS EN 338 | EN-Structural timber - Strength classes | |
| BSI BS EN 350-1 | EN-Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 1: Guide to the Principles of Testing and Classification of the Natural Durability of Wood (V) | |
| BSI BS EN 350-2 | EN-Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 2: Guide to Natural Durability and Treatability of Selected Wood Species of Importance in Europe (V) | |
| BSI BS EN 351-1 | EN-Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention | |
| BSI BS EN 351-2 | EN-Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood | |
| BSI BS EN 380 | EN-Timber Structures - Test Methods - General Principles for Static Load Testing (V) | |
| BSI BS EN 384 | EN-Structural timber - Determination of characteristic values of mechanical properties and density | |
| BSI BS EN 386 | EN-Glued laminated timber - Performance requirements and minimum production requirements | |
| BSI BS EN 387 | EN-Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements | |
| BSI BS EN 391 | EN-Glued Laminated Timber - Delamination Test of Glue Lines | |
| BSI BS EN 392 | EN-Glued Laminated Timber - Shear Test of Glue Lines (V) | |
| BSI BS EN 438-1 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 1: Introduction and general information-Together With BS EN 438 Parts 2 thru 7 supersedes BS EN 438-2:19 | |
| BSI BS EN 438-2 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties-Together with BS EN 438 Parts 1 and 3 to 7 supersedes BS EN 438-1:1991 | |
| BSI BS EN 438-3 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called laminates) Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporti | |
| BSI BS EN 438-4 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater-Together with B | |
| BSI BS EN 438-5 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bond | |
| BSI BS EN 438-6 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater- | |
| BSI BS EN 438-7 | EN-High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes-Togethe | |
| BSI BS EN 438-8 | EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) Part 8: Classification and specifications for design laminates | |
| BSI BS EN 438-9 | EN-High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) Part 9: Classification and specifications for alternative core laminates | |
| BSI BS EN 477 | EN-Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Resistance to Impact of Main Profiles by Falling Mass | |
| BSI BS EN 478 | EN-Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Appearance After Exposure at 150 Degrees Celsius - Test Method | |
| BSI BS EN 479 | EN-Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of Heat Reversion | |
| BSI BS EN 485-1 + A1 | EN-Aluminium and aluminium alloys - Sheet strip and plate - Part 1: Technical conditions for inspection and delivery-AMD: December 31 2009 | |
| BSI BS EN 485-2 | EN-Aluminium and aluminium alloys - Sheet strip and plate Part 2: Mechanical properties | |
| BSI BS EN 485-3 | EN-Aluminium and aluminium alloys Sheet strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products | |
| BSI BS EN 485-4 | EN-Aluminium and Aluminium Alloys - Sheet Strip and Plate Part 4: Tolerances on Shape and Dimensions for Cold-Rolled Products (V) | |
| BSI BS EN 486 | EN-Aluminium and aluminium alloys - Extrusion ingots - Specifications | |
| BSI BS EN 50177 | EN-Automatic electrostatic spraying equipment for flammable coating powder-CORR: January 31 2008 | |
| BSI BS EN 50307 | EN-Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables | |
| BSI BS EN 513 | EN-Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Resistance to Artificial Weathering | |
| BSI BS EN 514 | EN-Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Strength of Welded Corners and T-Joints-Supersedes BS 7413:1991; | |
| BSI BS EN 515 | EN-Aluminium and Aluminium Alloys - Wrought Products - Temper Designations (V) | |
| BSI BS EN 541 | EN-Aluminium and aluminium alloys - Rolled products for cans closures and lids - Specifications | |
| BSI BS EN 546-1 | EN-Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery | |
| BSI BS EN 546-2 | EN-Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties | |
| BSI BS EN 546-3 | EN-Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions | |
| BSI BS EN 546-4 | EN-Aluminium and aluminium alloys - Foil - Part 4: Special property requirements | |
| BSI BS EN 549 | EN-Rubber Materials for Seals and Diaphragms for Gas Appliances and Gas Equipment (V) | |
| BSI BS EN 570 | EN-Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification | |
| BSI BS EN 572-8 | EN-Glass in building Basic soda lime silicate glass products Part 8: Supplied and final cut sizes | |
| BSI BS EN 573-1 | EN-Aluminium and aluminium alloys Chemical composition and form of wrought products Part 1: Numerical designation system | |
| BSI BS EN 573-2 | EN-Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 2: Chemical Symbol Based Designation System | |
| BSI BS EN 573-3 | EN-Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 3: Chemical composition and form of products | |
| BSI BS EN 573-5 | EN-Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products | |
| BSI BS EN 575 | EN-Aluminium and Aluminium Alloys - Master Alloys Produced by Melting - Specifications (V) |