BSI - Materials - Historical Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 903-0 | EN-Physical Testing of Rubber Part 0: Introduction | |
| BSI BS 903-2 | EN-Physical Testing of Rubber Part 2: Guide to the Application of Statistics to Rubber Testing-Supersedes BS 5324: 1976; | |
| BSI BS 903-3 | EN-Physical testing of rubber Part 3: Acquisition and presentation of comparable single-point data-AMD 15154: October 4 2004 | |
| BSI BS 903-3 | EN-Physical testing of rubber Part 3: Acquisition and presentation of comparable single-point data | |
| BSI BS 903-4 | EN-Physical testing of rubber Part 4: Acquisition and presentation of comparable multi-point data | |
| BSI BS 903-60.1 | EN-Physical Testing of Rubber Part A60: Curemetering Section 60.1: Guide to the Use of Curemeters (V) | |
| BSI BS 903-A1 | EN-Physical Testing of Rubber Part A1: Determination of Density (ISO 2781: 1988) | |
| BSI BS 903-A1 | EN-Methods of Testing Vulcanized Rubber Part A1: Determination of Density-Amd 1; | |
| BSI BS 903-A10 | EN-Methods of testing vulcanized rubber - Part A10: Determination of flex cracking (De Mattia)-Superseded by BS ISO 132: 1999; ISO 132: 1983 | |
| BSI BS 903-A11 | EN-Methods of Testing Vulcanized Rubber Part A11: Determination of Resistance to Cut Growth (De Mattia-Type Machine)-Superseded by BS ISO 132:1999 | |
| BSI BS 903-A12 | EN-Physical Testing of Rubber Part A12: Method for Determination of the Adhesion Strength to Textile Fabric-Superseded by BS ISO 36: 2000; ISO 36: 1993 | |
| BSI BS 903-A12 | EN-Methods of Testing Vulcanized Rubber: Part A12: Determination of the Adhesion Strength of Vulcanized Rubbers to Fabrics (Ply Adhesion) | |
| BSI BS 903-A13 | EN-Physical Testing of Rubber Part A13: Method for Determination of Stiffness at Low Temperature (Gehman Test) (ISO 1432: 1988) | |
| BSI BS 903-A14 | EN-Physical Testing of Rubber Part A14: Method for Determination of Modulus in Shear or Adhesion to Rigid Plates - Quadruple Shear Method (ISO 1827: 1991) | |
| BSI BS 903-A14 | EN-Methods of Testing Vulcanized Rubber Part A14: Determination of Modulus in Shear of Rubber (Bonded Quadruple Shear Test Piece) | |
| BSI BS 903-A15 | EN-Physical Testing of Rubber Part A15: Method for Determination of Creep in Compression or Shear (ISO 8013: 1988) | |
| BSI BS 903-A16 | EN-Methods of Testing Vulcanized Rubber Part A16: Determination of the Effect of Liquids-Superseded by BS ISO 1817:1999 | |
| BSI BS 903-A17 | EN-Methods of Testing Vulcanized Rubber Part A17: Determination of the Permeability of Rubber to Gases (Constant Volume Method) | |
| BSI BS 903-A19 | EN-Methods of Testing Vulcanized Rubber Part A19: Heat Resistance and Accelerated Aging Tests-Superseded by BS ISO 188:1998; ISO 188:1982 | |
| BSI BS 903-A2 | EN-Methods of Testing Vulcanized Rubber Part A2: Determination of Tensile Stress-Strain Properties | |
| BSI BS 903-A2 | EN-Methods of Testing Vulcanized Rubber Part A2: Determination of Tensile Stress-Strain Properties (AMD 6987) May 1 1992-Amd 1; | |
| BSI BS 903-A2 | EN-Physical Testing of Rubber Part A2: Method for Determination of Tensile Stress-Strain Properties-Superseded by BS ISO 37: 2005 | |
| BSI BS 903-A21 | EN-Methods of Testing Vulcanized Rubber Part A21: Determination of Rubber-to-Metal Bond Strength-AMD 9419; February 15 1997; Superseded by BS 903: Part A21: Section 21.1: 1997; | |
| BSI BS 903-A21 | EN-Methods of Testing Vulcanized Rubber Part A21: Determination of Rubber-to-Metal Bond Strength-Superseded by BS 903: Part A21: Section 21.1: 1997 | |
| BSI BS 903-A21-21.2 | EN-Physical Testing of Rubber Part A21: Determination of Rubber to Metal Bond Strength; Section 21.2: Two Plate Method-ISO 814: 1996; Supersedes Method A of BS 903: Part A21: 1989; | |
| BSI BS 903-A24 | EN-Physical Testing of Rubber Part A24: Guide to the Determination of Dynamic Properties of Rubbers-Superseded by BS ISO 4664: 1998; | |
| BSI BS 903-A24 | EN-Methods of Testing Vulcanized Rubber Part A24: Measurement of Dynamic Moduli | |
| BSI BS 903-A25 | EN-Methods of Testing Vulcanized Rubber Part A25: Determination of Impact Brittleness Temperature-Amd 1; | |
| BSI BS 903-A25 | EN-Physical Testing of Rubber Part A25: Determination of Low-Temperature Brittleness (ISO 812: 1991) (V) | |
| BSI BS 903-A26 | EN-Physical Testing of Rubber Part A26: Method for Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD) (ISO 48: 1994) (V) | |
| BSI BS 903-A26 | EN-Physical Testing of Rubber - Part A26: Method for Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)-AMD 13157:August 2001; ISO 48:1994; | |
| BSI BS 903-A26 | EN-Methods of Testing Vulcanized Rubber Part A26: Determination of Hardness-Amd 1; | |
| BSI BS 903-A29 | EN-Physical Testing of Rubber Part A29: Determination of Low-Temperature Characteristics - Temperature-Retraction Procedure (TR Test)-ISO 2921: 1997; Superseded by BS ISO 2921: 2005 | |
| BSI BS 903-A29 | EN-Methods of Testing Vulcanized Rubber Part A29: Determination of Low Temperature Characteristics by Temperature-Retraction Procedure (TR Test) | |
| BSI BS 903-A3 | EN-Methods of Testing Vulcanized Rubber Part A3: Determination of Tear Strength (Trouser Angle and Crescent Test Pieces) | |
| BSI BS 903-A3 | EN-Physical Testing of Rubber Part A3: Method for Determination of Tear Strength (Trouser Angle and Crescent Test Pieces) (ISO 34-1: 1994) (V) | |
| BSI BS 903-A3.2 | EN-Physical Testing of Rubber Part A3: Determination of Tear Strength Section 3.2 Small (Delft) Test Pieces-ISO 34-2: 1996; | |
| BSI BS 903-A30 | EN-Methods of Testing Vulcanized Rubber Part A30: Determination of the Permeability of Rubber to Gases (Constant Pressure Method) | |
| BSI BS 903-A30 | EN-Physical Testing of Rubber Part A30: Determination of Permeability to Gases (ISO 2782: 1995) (V) | |
| BSI BS 903-A30 | EN-Physical Testing of Rubber Part A30: Determination of Permeability to Gases-ISO 2782: 1995 | |
| BSI BS 903-A31 | EN-Methods of Testing Vulcanized Rubber Part A31: Determination of the Low-Frequency Dynamic Properties of Rubbers by Means of a Torsion Pendulum-Amd 1;:2006 | |
| BSI BS 903-A32 | EN-Methods of Testing Vulcanized Rubber Part A32: General Directions for Achieving Elevated or Sub-Normal Temperatures for Test Purposes-Superseded by BS ISO 23529:2004 BS 903-A35:1995 BS 903-A38:1991 and BS 903-A49:1 | |
| BSI BS 903-A33 | EN-Methods of Testing Vulcanized Rubber Part A33: Methods of Test for Staining in Contact with Organic Materials-Superseded by BS ISO 3865: 1998 | |
| BSI BS 903-A34 | EN-Methods of Testing Vulcanized Rubber Part A34: Determination of Stress Relaxation of Rubber Rings in Compression | |
| BSI BS 903-A35 | EN-Physical Testing of Rubber Part A35: Temperatures Humidities and Times for Conditioning and Testing of Test Pieces (ISO 471: 1995) (V)-Superseded by BS ISO 23529:2004; BS 903-A32:1988 BS 903-A38:1991 and BS 903-A49 | |
| BSI BS 903-A35 | EN-Methods of Testing Vulcanized Rubber Part A35: Temperatures Humidities and Times for Conditioning and Testing of Test Pieces | |
| BSI BS 903-A36 | EN-Physical Testing of Rubber Part A 36: Method for Preparation of Samples and Test Pieces (ISO 4661-1: 1993) (V)-Superseded by BS ISO 23529:2004 | |
| BSI BS 903-A36 | EN-Methods of Testing Vulcanized Rubber Part A36: Preparation of Samples and Test Pieces | |
| BSI BS 903-A37 | EN-Physical testing of rubber - Part A37: Determination of tendency to adhere to and to corrode metals | |
| BSI BS 903-A37 | EN-Methods of Testing Vulcanized Rubber Part A37: Determination of Adhesion to and Corrosion of Metals-Superseded by BS 903: 1997 | |
| BSI BS 903-A38 | EN-Physical Testing of Rubber Part A38: Methods for the Determination of Dimensions of Test Pieces and Products for Test Purposes (ISO 4648: 1991)-Superseded by BS ISO 23529:2004; BS 903-A32:1988 BS 903-A35:1995 and BS | |
| BSI BS 903-A38 | EN-Methods of Testing Vulcanized Rubber Part A38: Determination of Dimensions of Test Pieces and Products for Test Purposes | |
| BSI BS 903-A39 | EN-Methods of Testing Vulcanized Rubber Part A39: Determination of Compression Set Under Constant Deflection at Low Temperatures | |
| BSI BS 903-A4 | EN-Physical Testing of Rubber Part A4: Determination of Compression Stress- Strain Properties (V) (ISO 7743: 1989) | |
| BSI BS 903-A4 | EN-Physical Testing of Rubber Part A4: Determination of Compression Stress- Strain Properties (V) (ISO 7743: 1989) (AMD 6741) September 30 1991-Amd 1; | |
| BSI BS 903-A40 | EN-Methods of Testing Vulcanized Rubber Part A40: Determination of Adhesion to Rigid Materials Using Conical Shaped Parts | |
| BSI BS 903-A42 | EN-Physical Testing of Rubber Part A42: Method for Determination of Stress Relaxation in Compression at Ambient and at Elevated Temperatures-Superseded by BS ISO 3384:1999; ISO 3384:1991 | |
| BSI BS 903-A42 | EN-Methods of Testing Vulcanized Rubber Part A42: Determination of Stress Relaxation | |
| BSI BS 903-A43 | EN-Physical Testing of Rubber Part A43: Method for Determination of Resistance to Ozone Cracking (Static Strain Test) (ISO 1431-1: 1989)-Superseded by BS ISO 1431-1:2004 | |
| BSI BS 903-A44 | EN-Methods of Testing Vulcanized Rubber Part A44: Determination of Resistance to Ozone Cracking (Dynamic Strain Test) | |
| BSI BS 903-A44 | EN-Physical Testing of Rubber Part A44: Method for Determination of Resistance to Ozone Cracking (Dynamic Strain Test) (ISO 1431-2: 1994) (V)-Superseded by BS ISO 1431-1:2004 | |
| BSI BS 903-A46 | EN-Physical Testing of Rubber Part A46: Method for Determination of the Transmission Rate of Volatile Liquids-ISO 6179: 1989; Superseded by BS ISO 6179:1998 | |
| BSI BS 903-A47 | EN-Methods of Testing Vulcanized Rubber Part A47: Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength-Superseded by BS ISO 6133: 1998 | |
| BSI BS 903-A5 | EN-Physical Testing of Rubber Part A5: Determination of Tension Set at Normal and High Temperatures-ISO 2285: 1997; Superseded by BS ISO 2285: 2001; | |
| BSI BS 903-A5 | EN-Physical Testing of Rubber Part A5: Method for Determination of Tension Set at Normal and High Temperatures (ISO 2285: 1988) (V) | |
| BSI BS 903-A5 | EN-Methods of Testing Vulcanized Rubber Part A5: Determination of Tension Set-Amd 1; | |
| BSI BS 903-A51 | EN-Methods of Testing Vulcanized Rubber Part A51: Determination of Resistance to Tension Fatigue | |
| BSI BS 903-A52 | EN-Methods of Testing Vulcanized Rubber Part A52: Determination of Aging Characteristics by Measurement of Stress at a Given Elongation | |
| BSI BS 903-A53 | EN-Methods of Testing Vulcanized Rubber Part A53: Methods for Exposure to Natural Weathering for Use in Determining Resistance to Weathering-Superseded by BS ISO 4665: 1998 | |
| BSI BS 903-A54 | EN-Methods of Testing Vulcanized Rubber Part A54: Methods for Exposure to Artificial Light for Use in Determining Resistance to Weathering (ISO 4665-3: 1987) (V)-Superseded by BS ISO 4665: 1998 | |
| BSI BS 903-A55 | EN-Methods of Testing Vulcanized Rubber Part A55: Methods for Assessment of Changes in Properties After Exposure to Natural Weathering or Artificial Light for Use in Determining Resistance to Weathering (ISO 4665/1: 19 | |
| BSI BS 903-A56 | EN-Methods of Testing Vulcanized Rubber Part A56: Determination of Adhesion to Wire Cord (ISO 5603: 1986) (V) | |
| BSI BS 903-A57 | EN-Physical Testing of Rubber Part A57: Determination of Indentation Hardness by Means of Pocket Hardness Meters-Superseded by BS ISO 7619-2: 2005 and BS ISO 7619-1: 2006 | |
| BSI BS 903-A57 | EN-Methods of Testing Vulcanized Rubber Part A57: Determination of Indentation Hardness by Means of Pocket Hardness Meters (ISO 7619: 1986) | |
| BSI BS 903-A58 | EN-Physical testing of rubber - Part A58: Methods using the Mooney viscometer-AMD 6662: March 1991; AMD 12086: June 2001 | |
| BSI BS 903-A58 | EN-Physical Testing of Rubber Part A58: Methods Using the Mooney Viscometer | |
| BSI BS 903-A58 | EN-Methods of Testing Vulcanized Rubber Part A58: Methods Using the Mooney Viscometer (AMD 6662) March 28 1991-Amd 1; | |
| BSI BS 903-A59 | EN-Methods of Testing Vulcanized Rubber Part A59: Methods Using Plastimeters-Supersedes BS BS 903: Part A59: Section 59.1: 1997 and BS 903: Part A59: Section 59.2: 1997; | |
| BSI BS 903-A59 | EN-Physical Testing of Rubber Part A59: Methods Using Plastimeters-AMD 7720; May 15 1993; Superseded by BS 903-A59.1:1997 and BS 903-A59.2:1997 |