Print Page Email Page Smaller Text Larger Text

BSI - Materials - Historical Collection

This collection contains documents from the following standards organization(s): British Standards Institution

Most Popular Standards from the BSI - Materials - Historical Collection

BSI BS EN 1811 EN-Reference Test Method for Release of Nickel from Products Intended to Come into Direct and Prolonged Contact with the Skin 
BSI BS EN 10225 EN-Weldable Structural Steels for Fixed Offshore Structures - Technical Delivery Conditions-CORR 14055: January 17 2003; Supersedes BS 7191:1989; 
BSI BS EN 10327 EN-Continuously hot-dip coated strip and sheet of low carbon steels for cold forming Technical delivery conditions-Supersedes BS EN 10142:2000 and together with BS EN 10326:2006 supersedes BS EN 10154:2004:1995 and B 
BSI BS EN 10002-1 EN-Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature 
BSI BS 8118 PART 1 EN-Structural use of aluminium Part 1: Code of practice for design-AMD 10485: July 1999 
BSI BS EN 12020-2 EN-Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on Dimensions and Form-Together with BS EN 515:1993 BS EN 573-3 and -4:1995 BS EN 755-1 and -2:1 
BSI BS EN 755-2 EN-Aluminium and Aluminium Alloys - Extruded Rod/Bar Tube and Profiles Part 2: Mechanical Properties-CORR 10035: June 1998; Supersedes BS 1474: 1987 BS 4300/12: 1969 BS 4300/15: 1973 BS 4300/4: 1973 and BS 4300/5: 1 
BSI BS 4449 EN-Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar coil and decoiled product - Specification-AMD 17103: April 30 2007 
BSI BS EN 573-3 EN-Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition 
BSI BS 7079-A1 SUPP 1 EN-Preparation of steel substrates before application of paints and related products. Group A. Visual assessment of surface cleanliness. Part A1. Specification for rust grades and preparation grades of uncoated steel su 
BSI BS 7448-2 EN-Fracture Mechanics Toughness Tests Part 2: Method for Determination of KIc Critical CTOD and Critical J Values of Welds in Metallic Materials 
BSI BS 2572 EN-Specification for Phenolic laminated sheet and epoxy cotton fabric laminated sheet-AMD 6966: February 1992; AMD 8841: October 1995 
BSI BS EN 10028-2 EN-Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties-CORR 16824: December 29 2006 
BSI BS EN 351-1 EN-Durability of Wood and Wood-Based Products - Preservative-Treated Solid Wood Part 1: Classification of Preservative Penetration and Retention (V) 
BSI BS EN 1706 EN-Aluminium and Aluminium Alloys - Castings - Chemical Composition and Mechanical Properties-Partially Supersedes BS 1490:1988; 
BSI BS EN 755-9 EN-Aluminium and Aluminium Alloys - Extruded Rod/Bar Tube and Profiles - Part 9: Profiles Tolerances on Dimensions and Form-CORR 13301:July 2001; Together with BS EN 515:1993 BS EN 573-3 and -4:1995 BS EN 755-1 and 
BSI BS EN ISO 7500-1 EN-Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system 
BSI BS 903-A6 EN-Physical Testing of Rubber Part A6: Method for Determination of Compression Set at Ambient Elevated or Low Temperatures (AMD 7975) March 15 1994 (ISO 815: 1991) (V)-Amd 1; 
BSI BS EN 755-1 EN-Aluminium and Aluminium Alloys - Extruded Rod/Bar Tube and Profiles Part 1: Technical Conditions for Inspection and Delivery 
BSI BS EN 10025-6 EN-Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition-Together with BS EN 10025-1 Supersedes 
BSI BS EN 10293 EN-Steel castings for general engineering uses-Supersedes BS 3100:1991 
BSI BS 8118-2 EN-Structural Use of Aluminium Part 2. Specification for Materials Workmanship and Protection-AMD 10486: July 1999 
BSI BS EN 755-8 EN-Aluminium and Aluminium Alloys - Extruded Rod/Bar; Tube and Profiles - Part 8: Porthole Tubes Tolerances on Dimensions and Form 
BSI BS EN 12385-1 EN-Steel wire ropes Safety Part 1: General requirements-CORR 15085: March 17 2004; 
BSI BS EN 485-2 EN-Aluminium and aluminium alloys - Sheet strip and plate - Part 2: Mechanical properties 
BSI BS EN 10045-2 EN-Charpy Impact Test on Metallic Materials Part 2: Method for the Verification of Impact Testing Machines (V) 
BSI BS EN 10213-2 EN-Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 2: Steel Grades for Use at Room Temperature and at Elevated Temperature (V) 
BSI BS EN 1982 EN-Copper and Copper Alloys - Ingots and Castings-Supersedes BS 1400: 1985 and DD 187: 1990; 
BSI BS EN 1057 EN-Copper and Copper Alloys - Seamless Round Copper Tubes for Water and Gas in Sanitary and Heating Applications 
BSI BS EN 10028-3 EN-Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels normalized 
BSI BS EN 12735-1 EN-Copper and copper alloys Seamless round copper tubes for air-conditioning and refrigeration Part 1: Tubes for piping systems-AMD 16627: September 29 2006 
BSI BS 8666 EN-Scheduling dimensioning bending and cutting of steel reinforcement for concrete Specification 
BSI BS EN 573-4 EN-Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products Part 4: Forms of products 
BSI BS EN 10111 EN-Continuously Hot-Rolled Low Carbon Steel Sheet and Strip for Cold Forming - Technical Delivery Conditions-Supersedes BS 1449: Section 1.2: 1991; 
BSI BS EN 10305-1 EN-Steel tubes for precision applications Technical delivery conditions Part 1: Seamless cold drawn tubes-CORR 14626: August 6 2003; CORR 17112: June 29 2007 
BSI BS EN 10028-7 EN-Flat products made of steels for pressure purposes Part 7: Stainless steels-CORR 15330:August 17 2004; Supersedes BS 1501-3:1990 
BSI BS 2782-3: METHOD 340A-B EN-Methods of testing Plastics - Part 3: Mechanical properties - Method 340A: Determination of shear strength of moulding material - Method 340B: Determination of shear strength of sheet material-AMD 5168: July 19 
BSI BS EN 485-1 EN-Aluminium and Aluminium Alloys - Sheet Strip and Plate Part 1: Technical Conditions for Inspection and Delivery (V) 
BSI BS EN 10051 EN-Continuously Hot-Rolled Uncoated Plate Sheet and Strip of Non-Alloy and Alloy Steels - Tolerances on Dimensions and Shape-AMD 9872; February 1998; 
BSI BS EN 12020-1 EN-Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 1: Technical Conditions for Inspection and Delivery-Together with BS EN 515:1993 BS EN 573-3 and -4:1995 BS EN 
BSI BS EN 10028-4 EN-Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties-CORR 16825: December 29 2006 
BSI BS EN 12385-4 EN-Steel wire ropes Safety Part 4: Stranded ropes for general lifting applications-Supersedes BS 302-2: 1987; 
BSI BS EN 10277-3 EN-Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels-Together with BS EN 10278 and BS EN 10277 Parts 124 and 5 Supersedes BS 970-3:1991; 
BSI BS 903-A26 EN-Physical Testing of Rubber - Part A26: Method for Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD)-AMD 13157:August 2001; ISO 48:1994; 
BSI BS EN 10305-4 EN-Steel tubes for precision applications Technical delivery conditions Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems-Together with BS EN 10305-1: 2002 Supersedes BS 6323-4: 1982; 
BSI BS EN 1676 EN-Aluminium and Aluminium Alloys - Alloyed Ingots for Remelting - Specifications-Partially Supersedes BS 1490: 1988; 
BSI BS EN 10213-3 EN-Corr.1 Technical Delivery Conditions for Steel Castings for Pressure Purposes Part 3: Steels for Use at Low Temperatures-CORR 10195; September 15 1998; Together with Parts 12 and 4 it Supersedes BS 1504: 1976; 
BSI BS EN 10305-3 EN-Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes-CORR 14628: August 6 2003; CORR 17110: June 29 2007 
BSI BS 4735 EN-Laboratory Method of Test for Assessment of the Horizontal Burning Char. of Specimens No Larger Than 150 mm X 50 mm X 13 mm (Nominal) of Cellular Plastics and Cellular Rubber Materials When Subjected to a Small Flame 
BSI BS EN 754-8 EN-Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 8: Porthole Tubes Tolerances on Dimensions and Form-Supersedes BS 1471: 1972;