BSI - British Standards Historical Excludes Adoptions Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 7291-1 | EN-Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Part 1: General requirements | |
| BSI BS 7291-2 | EN-Thermoplastics Pipes and Associated Fittings for Hot and Cold Water for Domestic Purposes and Heating Installations in Buildings - Part 2: Specification for Polybutylene (PB) Pipes and Associated Fittings | |
| BSI BS 7291-2 | EN-Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Part 2: Specification for polybutylene (PB) pipe and associated fittings | |
| BSI BS 7291-2 | EN-Thermoplastics Pipes and Associated Fittings for Hot and Cold Water for Domestic Purposes and Heating Installations in Buildings Part 2: Polybutylene (PB) Pipes and Associated Fittings | |
| BSI BS 7291-2 | EN-Thermoplastics Pipes and Associated Fittings for Hot and Cold Water for Domestic Purposes and Heating Installations in Buildings Part 2: Specification for Polybutylene (PB) Pipes and Associated Fittings-AMD 9443; Apr | |
| BSI BS 7291-3 | EN-Thermoplastics Pipes and Associated Fittings for Hot and Cold Water for Domestic Purposes and Heating Installations in Buildings - Part 3: Cross-Linked Polyethylene (PE-X) Pipes and Associated Fittings | |
| BSI BS 7291-3 | EN-Thermoplastics Pipes and Associated Fittings for Hot and Cold Water for Domestic Purposes and Heating Installations in Buildings Part 3: Crosslinked Polyethylene (PE-X) Pipes and Associated Fittings (Read in Conjunct | |
| BSI BS 7291-3 | EN-Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Part 3: Specification for cross-linked polyethylene (PE-X) pipes and associated fitting | |
| BSI BS 7295-1 | EN-Fusion Bonded Epoxy Coated Carbon Steel Bars for the Reinforcement of Concrete Part 1: Coated Bars-Superseded by BS ISO 14654: 1999; | |
| BSI BS 7295-2 | EN-Fusion Bonded Epoxy Coated Carbon Steel Bars for the Reinforcement of Concrete Part 2: Coatings-Superseded by BS ISO 14656: 1999; | |
| BSI BS 7296-1 | EN-Cavities for Hydraulic Fluid Power Cartridge Valves Part 1: Two-Port Slip-In Valves | |
| BSI BS 7299-1 | EN-Office Document Architecture (ODA) and Interchange Format for Text and Office Systems Part 1: Introduction and General Principles-Superseded by BS ISO/IEC 8613-1: 1994 | |
| BSI BS 7306 | EN-Procedures for the Operation of the UK Scheme for the Allocation of ISO DCC Format OSI NSAP Addresses (Including the Operation of the UK Registration Authority)-AMD 7652: May 15 1993; | |
| BSI BS 7306 | EN-Procedures for the Operation of the UK Scheme for the Allocation of ISO DCC Format OSI Network Layer Addresses (Including the Operation of the Associated UK Registration Authority) | |
| BSI BS 7306 | EN-Procedures for the Operation of the UK Scheme for the Allocation of ISO DCC Format OSI NSAP Addresses (Including the Operation of the UK Registration Authority) | |
| BSI BS 7307-1 | EN-Building Tolerances: Measurement of Buildings and Building Products Part 1: Methods and Instruments (Read in Conjunction with BS 7307: Part 2) (R) | |
| BSI BS 7310 | EN-Ion-Selective Electrodes Reference Electrodes Combination Electrodes and Ion-Selective Electrode Meters for Determination of Ions in Solution | |
| BSI BS 7314 | EN-Electric Stunners for Poultry-Superseded by BS EN 60335-2-87:1999 | |
| BSI BS 7315 | EN-Wrought Aluminium and Aluminium Alloy Enclosures for Gas- Filled High Voltage Switchgear and Controlgear | |
| BSI BS 7315 | EN-Wrought Aluminium and Aluminium Alloy Enclosures for Gas-Filled High-Voltage Switchgear and Controlgear (AMD 8053) December 15 1993 (E)-Amd 1; | |
| BSI BS 7318 | EN-Industrial Sewing Threads Made from Linen (Flax) or Cotton | |
| BSI BS 7319-12 | EN-Analysis of Sodium Chloride for Industrial Use Part 12: Methods of Determination of Anti- Caking Additives Content of Salt for Food Use | |
| BSI BS 7320 | EN-Sharps Containers | |
| BSI BS 7331 | EN-Direct Surfaced Wood Chipboard Based on Thermosetting Resins | |
| BSI BS 7334-1 | EN-Measuring Instruments for Building Construction Part 1: Methods for Determining Accuracy in Use: Theory | |
| BSI BS 7334-2 | EN-Measuring Instruments for Building Construction Part 2: Methods for Determining Accuracy in Use: Measuring Tapes | |
| BSI BS 7334-3 | EN-Measuring Instruments for Building Construction Part 3: Methods for Determining Accuracy in Use: Optical Levelling Instruments | |
| BSI BS 7338-1 | EN-Microfilm Jackets Part 1: Five-Channel Jacket for 16mm Microfilm | |
| BSI BS 7344 | EN-Specification for Reeled Low Density Polyethylene Film for General Purpose Application | |
| BSI BS 7346-1 | EN-Components for Smoke and Heat Control Systems Part 1: Natural Smoke and Heat Exhaust Ventilators | |
| BSI BS 7346-2 | EN-Components for Smoke and Heat Control Systems Part 2: Powered Smoke and Heat Exhaust Ventilators | |
| BSI BS 7346-3 | EN-Components for Smoke and Heat Control Systems Part 3: Specification for Smoke Curtains (AMD 6770) September 30 1991-Amd 1; | |
| BSI BS 7348 | EN-Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises (Q) | |
| BSI BS 7349-1 | EN-Blind Rivets with Break Mandrel Part 1: Specification for Closed End Blind Rivets (E) | |
| BSI BS 7350 | EN-Double Regulating Globe Valves and Flow Measurement Devices for Heating and Chilled Water Systems | |
| BSI BS 7354 | EN-Code of Practice for Design of High - Voltage Open-Terminal Stations | |
| BSI BS 7356 | EN-Half Masks and Quarter Masks for Respiratory Protective Devices-Superseded by BS EN 140: 1999; | |
| BSI BS 7363 | EN-Methods for Controlled Thermal Severity (CTS) Test and Bead-on-Plate (BOP) Test for Welds (Read in Conjunction with BS 6301) (F) | |
| BSI BS 7363 | EN-Methods for Controlled Thermal Severity (CTS) Test and Bead-on-Plate (BOP) Test for Welds (AMD 9161) November 15 1996 (F)-Amd 1; | |
| BSI BS 7371 PART 7 | EN-Coatings on Metal Fasteners - Part 7: Specification for Mechanically Applied Zinc Coatings | |
| BSI BS 7371-1 | EN-Coatings on metal fasteners - Part 1: Specification for general requirements and selection guidelines | |
| BSI BS 7371-3 | EN-Coatings on Metal Fasteners Part 3: Specification for Electroplated Zinc and Cadmium Coatings-Superseded by BS EN ISO 4042: 2000; | |
| BSI BS 7371-3 | EN-Coatings on Metal Fasteners Part 3: Specification for Electroplated Zinc and Cadmium Coatings-AMD 8181: March 15 1994 | |
| BSI BS 7373 | EN-Guide to the Preparation of Specifications | |
| BSI BS 7375 | EN-Code of Practice for Distribution of Electricity on Construction and Building Sites | |
| BSI BS 7375 | EN-Code of Practice for Distribution of Electricity on Construction and Building Sites (R) | |
| BSI BS 7376 | EN-Inclusion of Glass in the Construction of Tables or Trolleys | |
| BSI BS 7376 | EN-Inclusion of Glass in the Construction of Tables or Trolleys-Remains Current | |
| BSI BS 7377 | EN-Step Stools | |
| BSI BS 7377 | EN-Step Stools (AMD 7795) July 15 1993 (R)-Amd 1; | |
| BSI BS 7378-1 | EN-Apparatus for Connection to Public Telecommunications Systems Using the Digital Access Signalling System No. 2 (DASS 2) Via a 2048 kbit/s CCITT Recommendation G.703 Interface Part 1: General Requirements | |
| BSI BS 7383 | EN-Cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines | |
| BSI BS 7386 | EN-Draughtstrips for the Draught Control of Existing Doors and Windows in Housing (Including Test Methods)-Superseded by BS 7386: 1997; | |
| BSI BS 7394-1 | EN-Complete Spectacles Part 1: Specification for Ready-to-Wear Near-Vision Spectacles-AMD 7048 June 15 1992 | |
| BSI BS 7394-1 | EN-Complete Spectacles Part 1: Ready-to-Wear Near-Vision Spectacles-Superseded by BS EN 14139: 2002; | |
| BSI BS 7394-2 | EN-Complete Spectacles Part 2: Specification for Prescription Spectacles (N) | |
| BSI BS 7395 | EN-Circuit-Breakers for Equipment (CBE) | |
| BSI BS 7396 | EN-Permanent Preformed Road Markings | |
| BSI BS 7398 | EN-Hand Hacksaw Frames | |
| BSI BS 7404-4 | EN-Telecontrol Equipment and Systems Part 4: Specification for Performance (IEC 870-4: 1990) | |
| BSI BS 7405 | EN-Selection and Application of Flowmeters for the Measurement of Fluid Flow in Closed Conduits | |
| BSI BS 7409 | EN-Safety Requirements for Wheeled Child Conveyances (L) | |
| BSI BS 7409 | EN-Safety Requirements for Wheeled Child Conveyances (AMD 7177) July 15 1992-Amd 1; | |
| BSI BS 7409 | EN-Safety Requirements for Wheeled Child Conveyances | |
| BSI BS 7409 | EN-Safety Requirements for Wheeled Child Conveyances (AMD 8012) December 15 1993 (L)-Amd 2; | |
| BSI BS 7411 | EN-Lever Operated Knapsack Sprayers (L) | |
| BSI BS 7412 | EN-Plastics Windows Made from Unplasticized Polyvinyl Chloride (PVC-U) Extruded Hollow Profiles - Specification | |
| BSI BS 7412 | EN-Plastics Windows Made from PVC-U Extruded Hollow Profiles | |
| BSI BS 7412 | EN-Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles Specification-AMD 15107:August 17 2004; CORR 15366:September 28 2004 | |
| BSI BS 7412 | EN-Plastics Windows Made from PVC-U Extruded Hollow Profiles-AMD 8184: May 1994; | |
| BSI BS 7413 | EN-White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type A | |
| BSI BS 7413 | EN-White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type A (AMD 7269) July 15 1992-Amd 1; | |
| BSI BS 7413 | EN-White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type A (AMD 8185) May 15 1994 (R)-Amd 2; | |
| BSI BS 7414 | EN-Specification for White PVC-U Extruded Hollow Profiles with Heat Welded Corner Joints for Plastics Windows: Materials Type B | |
| BSI BS 7423 | EN-Specification for Safety Requirements for Children's Travel Cots of Internal Base Length Not Less Than 900 mm-To be Used in Conjunction with BS EN 716; | |
| BSI BS 7423 | EN-Safety Requirements for Children's Travel Cots of Internal Base Length Not Less Than 900 mm | |
| BSI BS 7423 | EN-Safety Requirements for Children's Travel Cots of Internal Base Length Not Less Than 900 mm-AMD 7656; June 15 1993; | |
| BSI BS 743 | EN-Materials for Damp-Proof Courses-AMD 4336; September 30 1983; | |
| BSI BS 7430 | EN-Code of practice for Earthing |