BSI - British Standards Historical Excludes Adoptions Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 6043-3.4 | EN-Methods of Sampling and Test for Raw Materials Used in Aluminium Manufacture - Part 3: Electrodes - Section 3.4: Determination of the Open Porosity and Bulk Density (Apparent Density) of Cathode Blocks and Prebaked A | |
| BSI BS 6043-3.5.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3.5.1: Electrodes - Determination of Flexural Strength - Three Point Method-ISO 12986-1: 2000; | |
| BSI BS 6043-3.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3: Electrodes - Section 3.6: Determination of Electrical Resistivity of Cathode Blocks and Prebaked Anodes at Ambient Tempe | |
| BSI BS 6043-3.8.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3: Electrodes - Section 3.8: Carboxy Reactivity of Prebaked Anodes - Subsection 3.8.1: Determination of the Reactivity by a | |
| BSI BS 6043-3.9.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3.9.1: Electrodes Chemical Reactivity to Air of Prebaked Anodes Determination of the Reactivity by a Loss in Mass Method- | |
| BSI BS 6043-4.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.1: Methods of Sampling | |
| BSI BS 6043-4.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 4: Cold Ramming Pastes- Section 4.1: Methods of Sampling-ISO 14422: 1999; | |
| BSI BS 6043-4.2 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.2: Determination of Effective Binder Content and Aggregate Content by Extraction with Quinol | |
| BSI BS 6043-4.4 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 4: Cold Ramming Pastes Section 4.4: Determination of Volatile Matter Content of Unbaked Paste | |
| BSI BS 6044 | EN-Pavement Marking Paints-Amd 1; Superseded by BS EN 1436: 1998 and BS EN 1871: 2000 | |
| BSI BS 6046-2 | EN-Use of Network Techniques in Project Management Part 2: Guide to the Use of Graphical and Estimating Techniques | |
| BSI BS 6046-3 | EN-Use of Network Techniques in Project Management Part 3: Guide to the Use of Computers | |
| BSI BS 6046-4 | EN-Use of Network Techniques in Project Management Part 4: Guide to Resource Analysis and Cost Control | |
| BSI BS 6047-1 | EN-Flame Supervision Devices for Domestic Commercial and Catering Gas Appliances Part 1: Heat Sensitive Types-Withdrawn on 01 December 2002 | |
| BSI BS 6048 | EN-Black Tea | |
| BSI BS 6048 | EN-Specification for Black tea [ISO title: Black tea Definition and basic requirements]-Amd 7197: July 15 1992; ISO 3720:1986 | |
| BSI BS 6049-3 | EN-Methods of Test for Tea Part 3: Determination of Water Extract | |
| BSI BS 6049-3 | EN-Methods of Test for Tea Part 3: Determination of Water Extract-ISO 9768: 1994; | |
| BSI BS 6056 | EN-Measurement of Transformer and Reactor Sound Levels | |
| BSI BS 6056 | EN-Determination of Transformer and Reactor Sound Levels | |
| BSI BS 6057-1.1 | EN-Rubber Latices Part 1: Specifications and Coding Section 1.1: Specification for Centrifuged or Creamed Ammonia-Preserved Natural Rubber Latices-ISO 2004: 1988 | |
| BSI BS 6057-3.1 | EN-Rubber Latices Part 3: Methods of Test Section 3.1: Determination of Mechanical Stability of Natural Rubber Latex Concentrate (ISO 35: 1989)-Supersedes BS 1672:1972 | |
| BSI BS 6057-3.10 | EN-Rubber Latices Part 3: Methods of Test Section 3.10: Determination of Surface Tension (ISO 1409: 1995) (V) | |
| BSI BS 6057-3.10 | EN-Rubber Latices Part 3: Methods of Test Section 3.10: Determination of Surface Tension | |
| BSI BS 6057-3.12 | EN-Rubber Latices Part 3: Methods of Test Section 3.12: Determination of Boric Acid Content of Natural Rubber Latex Concentrate | |
| BSI BS 6057-3.13 | EN-Rubber latices Part 3. Methods of test Section 3.13 Determination of sludge content | |
| BSI BS 6057-3.2 | EN-Rubber Latices Part 3: Methods of Test Section 3.2: Determination of Total Solids Content | |
| BSI BS 6057-3.2 | EN-Rubber Latices Part 3: Methods of Test Section 3.2: Determination of Total Solids Content of Rubber Latices-ISO 124: 1997; | |
| BSI BS 6057-3.21 | EN-Rubber Latices Part 3: Methods of Test Section 3.21: Determination of Bound Acrylonitrile Content Nitrile Latex (ISO 3900: 1995) (V) | |
| BSI BS 6057-3.4 | EN-Rubber Latices Part 3: Methods of Test Section 3.4: Determination of Dry Rubber Content of Natural Rubber Latices | |
| BSI BS 6057-3.4 | EN-Rubber Latices Part 3: Methods of Test Section 3.4: Determination of Dry Rubber Content of Natural Rubber Latices (ISO 126: 1989) (AMD 7321) October 15 1992-Amd 1; | |
| BSI BS 6057-3.5 | EN-Rubber Latices Part 3: Methods of Test Section 3.5: Determination of KOH Number of Natural Rubber Latices (ISO 127: 1995) (V) | |
| BSI BS 6057-3.5 | EN-Rubber Latices Part 3: Methods of Test Section 3.5: Determination of KOH Number of Natural Rubber Latices-ISO 127: 1995 | |
| BSI BS 6057-3.5 | EN-Rubber Latices Part 3: Methods of Test Section 3.5: Determination of KOH Number of Natural Rubber Latices | |
| BSI BS 6057-3.6 | EN-Rubber Latices Part 3: Methods of Test Section 3.6: Determination of Volatile Fatty Acid Number | |
| BSI BS 6057-3.7 | EN-Rubber Latices Part 3: Methods of Test Section 3.7: Determination of Density of Natural Rubber Latices | |
| BSI BS 6057-3.9 | EN-Rubber Latices Part 3: Methods of Test Section 3.9: Determination of pH | |
| BSI BS 6057-3.9 | EN-Rubber Latices Part 3: Methods of Test Section 3.9: Determination of pH (ISO 976: 1996) (V) | |
| BSI BS 6058 | EN-Method of Specifying and Verifying the Characteristics of Rotating Anode X-Ray Tubes and X-Ray Tube Assemblies Used in Medical Diagnosis (N) | |
| BSI BS 6062-3 | EN-Packaging of Electronic Components for Automatic Handling Part 3: Packaging of Leadless Components on Continuous Tapes | |
| BSI BS 6062-4 | EN-Packaging of Electronic Components for Automatic Handling Part 4: Specification for Stick Magazines for Dual-in-Line Packages (IEC 286-4: 1991) | |
| BSI BS 6063 | EN-Methods of Test for Non-Oil Extended Raw General Purpose Ethylene-Propylene-Diene Rubbers (EPDM) | |
| BSI BS 6064 | EN-Methods of Test for Raw Acrylonitrile-Butadiene (NBR) Rubber | |
| BSI BS 6065 | EN-Sampling and Acceptance Testing of Shaped Refractory Products | |
| BSI BS 6068-0 | EN-Water Quality Part 0: Introduction | |
| BSI BS 6068-1.1 | EN-Water Quality Part 1: Glossary Section 1.1: Terms Relating to Types of Water and Treatment and Storage of Waste Water | |
| BSI BS 6068-1.2 | EN-Water Quality Part 1: Glossary Section 1.2: Additional Terms Relating to Types of Water and Treatment and Storage of Water and Waste Water and Terms Used in Sampling and Analysis of Water-Superseded by BS 6068-1.2: | |
| BSI BS 6068-1.3 | EN-Water Quality Part 1: Glossary Section 1.3: an Additional 91 Terms | |
| BSI BS 6068-1.3 | EN-Water Quality - Part 1: Glossary - Section 1.3: An Additional 90 Terms-ISO 6107-3: 1993; | |
| BSI BS 6068-1.4 | EN-Water Quality Part 1: Glossary Section 1.4: an Additional 19 Terms (ISO 6107/4: 1984) | |
| BSI BS 6068-1.5 | EN-Water Quality Part 1: Glossary Section 1.5: an Additional 49 Terms | |
| BSI BS 6068-1.6 | EN-Water Quality Part 1: Glossary Section 1.6: an Additional 41 Terms | |
| BSI BS 6068-1.6 | EN-Water Quality Part 1: Glossary Section 1.6: an Additional 42 Terms | |
| BSI BS 6068-1.7 | EN-Water Quality Part 1: Glossary Section 1.7: an Additional 47 Terms-Superseded by BS 6068-1.7: 1997; ISO 6107-7: 1990 | |
| BSI BS 6068-2.11 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.11: Determination of Ammonium: Manual Spectrometric Method | |
| BSI BS 6068-2.12 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.1: Determination of Phenol Index: 4-Aminoantipyrine (4-Aminophenazone) Spectrometric Methods After Distillation | |
| BSI BS 6068-2.17 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.17: Methods for Determination of Total Cyanide | |
| BSI BS 6068-2.18 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.18: Methods for Determination of Easily Liberatable Cyanide | |
| BSI BS 6068-2.19 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.19: Methods for Determination of Cyanogen Chloride | |
| BSI BS 6068-2.24 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.24: Method for Determination of Non- Ionic Surfactants Using Dragendorff Reagent | |
| BSI BS 6068-2.28 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.28: Methods for the Determination of Phosphorus: Ammonium Molybdate Spectrometric Method | |
| BSI BS 6068-2.29 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.29: Determination of Cobalt Nickel. Copper Zinc Cadmium and Lead: Flame Atomic Absorption Spectrometric Methods | |
| BSI BS 6068-2.33 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.33: Method for the Determination of Ammonium: Automated Spectrometric Method | |
| BSI BS 6068-2.34 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.34: Method for the Determination of the Chemical Oxygen Demand | |
| BSI BS 6068-2.36 | EN-Water Quality Part 2: Physical Chemical and Biochemical Methods Section 2.36: Spectrometric Method for the Determination of Nitrate Using Sulphosalicylic Acid (ISO 7890-3: 1988)(SUP'S BS 2690: Part 7: 1968) | |
| BSI BS 6068-2.39 | EN-Water quality - Part 2: Physical chemical and biochemical methods - Section 2.39 Method for the determination of sulphate using barium chloride and gravimetry | |
| BSI BS 6068-2.40 | EN-Water Quality Part 2: Physical Chemical and Biochemical Methods Section 2.40: Method for the Determination of Borate by Spectrometry Using Azomethine-H (ISO 9390: 1990) | |
| BSI BS 6068-2.9 | EN-Water Quality Part 2: Physical Chemical and Bio-Chemical Methods Section 2.0: Determination of the Sum of Calcium and Magnesium: EDTA Titrimetric Method | |
| BSI BS 6068-3-2 | EN-Water Quality Part 3: Radiological Methods Section 3.2: Measurement of Gross Beta Activity in Non-Saline Water (ISO 9697: 1992) | |
| BSI BS 6068-4.11 | EN-Water Quality - Part 4: Microbiological Methods - Section 4.11: Detection and Enumeration of Bacteriophages - Enumeration of F-Specific RNA Bacteriophages-ISO 10705-1: 1995; | |
| BSI BS 6068-4.11 | EN-Water Quality Part 4: Microbiological Methods Section 4.11: Detection and Enumeration of Bacteriophages - Enumeration of F-Specific RNA Bacteriophages (ISO 10705-1: 1995) (N) | |
| BSI BS 6068-4.13 | EN-Water Quality - Detection and Enumeration of Bacteriophages - Part 2: Enumeration of Somatic Coliphages-ISO 10705-2:2000 | |
| BSI BS 6068-5.28 | EN-Water Quality - Determination of Long Term Toxicity of Substances to Daphnia Magna Straus (Cladocera Crustacea) | |
| BSI BS 6069-1 | EN-Characterization of Air Quality Part 1: Units of Measurement | |
| BSI BS 6069-2 | EN-Characterization of Air Quality Part 2: Glossary | |
| BSI BS 6069-4.4 | EN-Characterization of Air Quality Part 4: Stationary Source Emissions Section 4.4: Determination of the Mass Concentration of Sulfur Dioxide - Performance Characteristics of Auto- mated Measuring Methods (ISO 7935: 199 | |
| BSI BS 6073-1 | EN-Precast Concrete Masonry Units Part 1: Specification for Precast Concrete Masonry Units-Amd 2; Partially Superseded by BS EN 772-2: 1998 | |
| BSI BS 6073-2 | EN-Precast Concrete Masonry Units Part 2: Method for Specifying Precast Concrete Masonry Units (AMD 4508) March 30 1984-Amd 1; | |
| BSI BS 6076 | EN-Polymeric Film for Use as a Protective Sleeving for Buried Iron Pipes and Fittings (for Site and Factory Application) (E) |