BSI - British Standards Historical Excludes Adoptions Collection
This collection contains documents from the following standards organization(s): British Standards Institution
| BSI BS 5990 | EN-Direct Gas-Fired Forced Convection Air Heaters with Rated Heat Inputs up to 2 MW for Industrial and Commercial Space Heating Safety and Performance Requirements (Excluding Electrical Requirements) (2nd Family Gases)- | |
| BSI BS 5991 | EN-Specification for Indirect gas fired forced convection air heaters for space heating (60 kW up to 2 MW input) : safety and performance requirements (excluding electrical requirements) (2nd family gases)-AMD 5640: Jan | |
| BSI BS 5991 | EN-Specification for Indirect gas fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating: safety and performance requirements (excluding electrical requirements | |
| BSI BS 5992-2 | EN-Electrical Relays Part 2: All-Or-Nothing Electrical Relays-See Also BS 142: Section 2.1 | |
| BSI BS 5993 | EN-Leather-Covered Cricket Balls | |
| BSI BS 5996 | EN-Ultrasonic Testing and Specifying Quality Grades of Ferritic Steel Plate-Amd 2; Superseded by BS 5996: 1993 | |
| BSI BS 5F 37 | EN-Specification for 570 g/m2 and 640 g/m2 cotton fabrics | |
| BSI BS 5F 49 | EN-Shuttle Woven Cotton Webbing for Aerospace Purposes (AMD 7221) August 15 1992-Amd 1; | |
| BSI BS 5F 49 | EN-Shuttle Woven Cotton Webbing for Aerospace Purposes | |
| BSI BS 5F 55 | EN-345 G/Square Metres and 415 G/Square Metres Cotton Fabrics | |
| BSI BS 5G 205-1 | EN-Secondary Batteries for Aircraft Part 1: Lead-Acid Batteries | |
| BSI BS 5S 100 | EN-Inspection Testing and Acceptance of Wrought Steels (Other Than Plate Sheet Strip and Tube)-AMD 10292/r; February 15 1999; Corrected and Reprinted April 1999; Supersedes 4S 100: 1975; | |
| BSI BS 5S 100 | EN-Inspection Testing and Acceptance of Wrought Steels (Other Than Plate Sheet Strip and Tube)-Corrected and Reprinted April 1999; Supersedes BS 4S 100: 1975; | |
| BSI BS 5S 100 | EN-Procedure for inspection testing and acceptance of wrought steels (other than plate sheet strip and tube)-AMD 13966: March 21 2003; Revision and Superseding BS 4S 100:1975; | |
| BSI BS 5S 80 | EN-High Chromium-Nickel Corrosion-Resisting Steel Billets Bars Forgings and Parts (880-1080 MPa; Limiting Ruling Section 100 mm)-Amd 2; | |
| BSI BS 5S 82 | EN-Specification for 4% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1320-1520 MPa)-AMD 3532:August 1981; | |
| BSI BS 5S 99 | EN-Specification for 2.5 % nickel-chromium-molybdenum (high carbon) steel billets bars forgings and parts (1230-1420 MPa: limiting ruling section 150 mm) | |
| BSI BS 5SP 4 | EN-Steel Pins-Replaces 4SP 4: 1934; Superseded by 6SP 4: 2000 | |
| BSI BS 600 | EN-Application of Statistical Methods to Industrial Standardization and Quality Control-Amd 2; | |
| BSI BS 6000 | EN-Guide to the Use of BS 6001. Sampling Procedures and Tables for Inspection by Attributes | |
| BSI BS 6001-0 | EN-Sampling Procedures for Inspection by Attributes Part 0: Introduction to the BS 6001 Attribute Sampling System (ISO 2859-0: 1995) (G) | |
| BSI BS 6001-1 | EN-Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection-ISO 2859-1:1999; | |
| BSI BS 6001-1 | EN-Sampling Procedures for Inspection by Attributes Part 1: Specification for Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection-AMD 8026; February 15 1994; ISO 2859-1: 1989; | |
| BSI BS 6001-1 | EN-Sampling Procedures for Inspection by Attributes Part 1: Specification for Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection (ISO 2859-1: 1989) | |
| BSI BS 6001-1 | EN-Sampling Procedures for Inspection by Attributes Part 1: Specification for Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection-AMD 8223; July 15 1994; ISO 2859-1: 1989; | |
| BSI BS 6001-2 | EN-Sampling Procedures for Inspection by Attributes Part 2: Sampling Plans Indexed by Limiting Quality (LQ) for Isolated Lot Inspection-Amd 1; | |
| BSI BS 6001-3 | EN-Sampling Procedures for Inspection by Attributes Part 3: Skip-Lot Procedures | |
| BSI BS 6001-3 | EN-Sampling Procedures for Inspection by Attributes Part 3: Specification for Skip-Lot Procedures (ISO 2859-3: 1991) (G) | |
| BSI BS 6001-4 | EN-Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection | |
| BSI BS 6001-4 | EN-Sampling procedures for inspection by attributes - Part 4: Specification for sequential sampling plans | |
| BSI BS 6001-5 | EN-Sampling Procedures for Inspection by Attributes - Part 5: Procedures for Assessment of Stated Quality Levels-CORR 10891: April 2000; Renumbers BS ISO 2859-4:2000; ISO 2859-4: 1999 | |
| BSI BS 6001-7 | EN-Sampling Procedures for Inspection by Attributes - Part 7: Credit-Based Accept-Zero Sampling Schemes for the Control of Outgoing Quality for Lot-by-Lot Inspection | |
| BSI BS 6002-1 | EN-Sampling Procedures for Inspection by Variables Part 1: Specification for Single Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection (ISO 3951: 1989) (G) | |
| BSI BS 6004 | EN-PVC-Insulated Cables (Non-Armoured) for Electric Power and Lighting | |
| BSI BS 6004 | EN-PVC-Insulated Cables (Non-Armoured) for Electric Power and Lighting | |
| BSI BS 6004 | EN-Electric cables PVC insulated non-armoured cables for voltages up to and including 450/750 V for electric power lighting and internal wiring-AMD 14195: February 25 2004 | |
| BSI BS 6004 | EN-Electric cables PVC insulated non-armoured cables for voltages up to and including 450/750 V for electric power lighting and internal wiring-AMD 14195: February 25 2004; AMD 15646: April 26 2005; Together with | |
| BSI BS 6004 | EN-Electric Cables - PVC Insulated Non-Armoured Cables for Voltages up to and Including 450/750V for Electric Power Lighting and Internal Wiring | |
| BSI BS 6004 | EN-PVC-Insulated Cables (Non-Armoured) for Electric Power and Lighting (E) | |
| BSI BS 6004 | EN-PVC-Insulated Cables (Non-Armoured) for Electric Power and Lighting (AMD 7894) (E)-Amd 1; | |
| BSI BS 6004 | EN-PVC-Insulated Cables (Non-Armoured) for Electric Power and Lighting (AMD 6227) January 31 1990 (E)-Amd 2; | |
| BSI BS 6005 | EN-Moulded Transparent Polycarbonate Bowls Used in Compressed Air Filters and Lubricators-Amd 1; | |
| BSI BS 6005 | EN-Moulded Transparent Polycarbonate Bowls Used in Compressed Air Filters and Lubricators (E) | |
| BSI BS 6007 | EN-Rubber-Insulated Cables for Electric Power and Lighting | |
| BSI BS 6007 | EN-Rubber-Insulated Cables for Electric Power and Lighting (AMD 8214) November 15 1995 (E)-Amd 1; | |
| BSI BS 6007 | EN-Rubber-Insulated Cables for Electric Power and Lighting-AMD 7566; May 15 1993; | |
| BSI BS 6007 | EN-Electric Cables - Single Core Unsheathed Heat Resisting Cables for Voltages up to and Including 450/750 V for Internal Wiring-Together with BS 6500:2000 and BS 6004:2000 supersedes BS 6141:1991 | |
| BSI BS 6007 | EN-Rubber-Insulated Cables for Electric Power and Lighting-Amd 1; | |
| BSI BS 6007 | EN-Rubber-Insulated Cables for Electric Power and Lighting | |
| BSI BS 6010-3 | EN-Rolling Bearings- Bearings with Spherical Outside Surface and Extended Inner Ring Width Part 3: Dimensions of Cast and Pressed Housings | |
| BSI BS 6014 | EN-Ethylene propylene rubber compounds - Specification | |
| BSI BS 6014 | EN-Specification for Ethylene propylene rubber compounds | |
| BSI BS 6018 | EN-Method of Test for Accuracy and Precision of Mechanical Handpipettes down to 0.05ml Capacity-Amd 1; | |
| BSI BS 6031 | EN-Code of Practice for Earthworks-Amd 1; | |
| BSI BS 6036 | EN-Method for Determination of the Edgewise Crush Resistance of Corrugated Fibre Board | |
| BSI BS 6037 | EN-Permanently Installed Suspended Access Equipment (R) (AMD 6709) December 21 1990-Amd 1; | |
| BSI BS 6037 | EN-Permanently Installed Suspended Access Equipment (AMD 6799) November 29 1991-Amd 2; | |
| BSI BS 6042 | EN-Dental Semi-Precious Metal Casting Alloys | |
| BSI BS 6043-1-1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.1: Sampling | |
| BSI BS 6043-1-7 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.7: Determination of Apparent Density (Bouyancy Method) | |
| BSI BS 6043-1.10 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.10: Determination of Volatile Matter Content (V) | |
| BSI BS 6043-1.10 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 1:Electrode Pitch - Section 1.10: Determination of Volatile Matter Content-ISO 12977: 1999; | |
| BSI BS 6043-1.10 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.10: Determination of Volatile Matter Content (AMD 8442) January 15 1995 (V)-Amd 1; | |
| BSI BS 6043-1.11 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.11: Determination of the Atomic C/H Ratio of the Quinoline-Insoluble Material (V) | |
| BSI BS 6043-1.11 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 1: Electrode Pitch - Section 1.11: Determination of the Atomic C/H Ratio of the Quinoline-Insoluble Material-ISO 12979: 199 | |
| BSI BS 6043-1.13 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 1: Electrode Pitch - Section 1.13: Determination of Sulfur Content-ISO 10238: 1999; | |
| BSI BS 6043-1.13 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.13: Determination of Sulfur Content (Routine Method) | |
| BSI BS 6043-1.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.6: Determination of Coking Value | |
| BSI BS 6043-1.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.6: Determination of Coking Value-ISO 6998: 1997; | |
| BSI BS 6043-1.6 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 1: Electrode Pitch Section 1.6: Determination of Coking Value-AMD 7662; May 15 1993; ISO 6998: 1984; | |
| BSI BS 6043-2.11 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 2: Electrode Coke Section 2.11: Determination of Volatile Matter Content (ISO 9406: 1988) | |
| BSI BS 6043-2.18 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 2: Electrode Coke - Section 2.18: Determination of Total Sulfur by the Eschka Method-ISO 5931:2000; | |
| BSI BS 6043-2.20.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 2: Electrode Coke - Section 2.20: Carboxy Reactivity of Calcined Coke - Subsection 2.20.1: Determination of the Reactivity | |
| BSI BS 6043-2.21.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 2: Electrode Coke - Section 2.21: Air Reactivity of Calcined Coke - Subsection 2.21.1: Determination of the Reactivity by D | |
| BSI BS 6043-2.3 | EN-Methods of sampling and test for Carbonaceous materials used in aluminium manutacture Part 2. Electrode coke Section 2.3 Determination of trace elements by flame atomic absorption spectrometry | |
| BSI BS 6043-2.4 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 2: Electrode Coke Section 2.4: Analysis by X-Ray Flourescence Spectroscopy-ISO 12980: 2000; | |
| BSI BS 6043-2.9 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 2.9: Electrode Coke - Determination of Particle Size Distribution-ISO 12984: 2000; | |
| BSI BS 6043-3.1.1 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3: Electrodes - Section 3.1: Sampling - Subsection 3.1.1: Sampling of Cathodes-ISO 8007-1: 1999; | |
| BSI BS 6043-3.1.2 | EN-Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture - Part 3: Electrodes - Section 3.1: Sampling - Subsection 3.1.2: Sampling of Anodes-ISO 8007-2: 1999; |